Nanopillar array chip integrated with on-line stacking for fast DNA separation with high sensitivity and high resolution

Recent developments of nanofabrication techniques have created a trend switching from randomly ordered polymeric matrices, such as gel, to highly ordered sieving nanostructures in the separation of biomolecules. These nanostructures have enormous potential for fast separation of biomolecules, while nanostructure-based separation techniques suffer from critical scaling problems; they are efficient in handling less than nanoliter amounts of sample fluids, but most biomolecule samples are available in a liquid volume that is over several microliter, leading to a reduction in sensitivity and resolution. In this study, we developed a nanopillar array chip integrated with an easy and rapid on-line stacking method and achieved fast DNA separation with high sensitivity and high resolution. The developed on-line stacking method is based on the balance of two forces driven by electric fields: electroosmotic flow (EOF) and electrophoresis. The EOF mobility from the microchannel to the nanopillar-channel is drastically decreased, while, on the other hand, electrophoresis has constant mobilities in the whole length of the channels. The on-line stacking was realized at the well-balanced position of the two forces, and the on-line stacking using the nanopillar array chip can also be achieved within 10 s by just applying electric voltages without any other special reagents and materials. After applying on-line stacking using the nanopillar array chip, the relative fluorescence intensity increased 1,000-fold, and the resolution was twice as good as that without on-line stacking.     

Quantitative analysis of collaborative and mobility networks

This study proposes a quantitative analysis of researcher mobility (i.e. transfer from one institution to another) and collaborative networks on the basis of author background data extracted from biographical notes in scientific articles to identify connections that are not revealed via simple co-authorship analysis. Using a top-ranked journal in the field of computer vision, we create a layered network that describes various aspects of author backgrounds, demonstrating a geographical distribution of institutions. We classify networks according to various dimensions including authors, institutions and countries. The results of the quantitative analysis indicate that mobility networks extend beyond the typical collaborative networks describing institutional and international relationships. We also discuss sectoral collaboration considering the mobility networks. Our findings indicate a limitation of collaborative analysis based on bibliometric data and the importance of tracing researcher mobility within potential networks to identify the true nature of scientific collaboration.     

Performance evaluation of membrane on catalyst module for hydrogen production from natural gas

We have been developing a hydrogen production module with a Pd-based membrane on catalyst (MOC) from natural gas. The MOC module is expected to be more compact and cheaper than the conventional hydrogen production module. To evaluate the hydrogen production performance of the MOC module and to clear the factor that dominates the effective hydrogen production, we compared the reforming performance of the catalytic support without hydrogen permeable membrane and the MOC module at various reaction conditions. As a result, it was cleared that hydrogen permeation through the membrane improves the methane conversion drastically in the MOC module by comparing with the support only module and changing the experimental conditions.     

Application of polymer gels containing side‐chain phosphate groups to drug‐delivery contact lenses

Hydrogels that contain phosphate groups in side chains were studied for their usefulness in drug‐delivery soft contact lenses (SCLs). Naphazoline, a model drug having a cationic group, was incorporated into an SCL because of its phosphate groups and was released over a period of about 14 h. For the SCL, the naphazoline content was equivalent to the phosphate group content. It is suggested that drug‐delivery SCLs can be designed to contain the needed amount of a drug through the choice of the ionic group for the ligand. Furthermore, the SCL having amide groups and phosphate groups had high transparency and an unchanged shape. It is suggested that amide groups and phosphate groups must be introduced into the polymer in equimolar amounts to give the necessary polymer–drug interaction. Therefore, hydrogels having a drug‐delivery system were synthesized by the inclusion of a phosphate group and an amide group. These hydrogels are also applicable to SCL materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 731–735, 2005     

Binding of chrysophenine G by methyl cellulose and poly(vinyl alcohol)

Equilibrium constants (nK) for the binding of Chrysophenine G by methyl cellulose (MC) and poly(vinyl alcohol) (PVA) were determined spectrophotometrically in the temperature range 15–40°C. The polymer chains of PVA extended by the dye binding but those of MC shrank slightly. The enthalpy change and the entropy change for the binding by MC were negative and positive, respectively, whereas those for the binding by PVA were both negative. When the dye was bound to the extended polymer chains, the contribution of the entropy term to the binding increased. The rate of the dye bindings was studied by means of the temperature jump method. For the dye binding to PVA, the whole relaxation process finished in a very rapid step. On the other hand, for dye binding to MC, the initial rapid step was followed by two successive slower steps; the relaxation times for the slower steps were independent of the polymer concentration. The results were interpreted in terms of the stiffness of polymer chain of MC; the conformational change of the stiff chains to accommodate the dye in stable states seems to be the rate determining step in each slow relaxation.     

Photoconductive imaging in a photon scanning tunnelling microscope capable of point-contact current sensing using a conductive fibre probe

A photoconductive photon scanning tunnelling microscope was developed to investigate the point-contact photoconductive properties of condensed matter. In order to detect the current and the optical signal at a local point on a surface, we coated the edge of a bent type fibre probe with indium tin oxide. Thus it was possible to measure both photocurrent and optical property with subwavelength resolution. The performance of the novel microscope was evaluated by analysing an organic thin film of copper phthalocyanine (CuPc), which is known to be an efficient photoconductive material. Photocurrent and current–voltage characteristics were observed at the local point on the CuPc thin films. Furthermore, photoconductive images were obtained with topography and near-field optical imaging using this system. The photoconductive PSTM shows potential in various areas of future optics and electronics.     

In vitro determination of basement membrane invasion predicts liver metastases in human gastrointestinal carcinoma

We described previously (H. Imamura, et al., Cancer Res., 54: 3620-3624, 1994) a quantitative and reproducible 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay for tumor cell invasiveness that uses a water-repellent, paraffin-treated Chemotaxicell chamber to produce a uniform Matrigel layer. In the present experiments, we studied 71 human gastrointestinal carcinomas, including 53 maintained as xenografts in nude mice and 18 fresh surgical specimens. We found a correlation between metastatic behavior and the percent invasion (PI) calculated from the MTT assay. Tumors producing liver metastases had a significantly higher PI than did tumors without liver metastases (P < 0.01), and seven of nine fresh tumors with a PI greater than 1.0 showed liver metastases within 2 years. No significant correlations were noted between the PI and clinicopathological factors. In the tumor xenografts, type IV collagenase activity was significantly higher in tumors with clinically evident liver metastases than in those without liver metastases (P < 0.05). Colorectal carcinomas with liver metastases and a high PI showed higher expression of matrix metalloproteinase 9 than matrix metalloproteinase 2 as assessed by gelatin zymography. Thus, the invasion-MTT assay is clinically useful for predicting liver metastases. Type IV collagenase plays an important role in the development of liver metastases from human gastrointestinal carcinoma.     

Numerical simulation on liquid jet behavior issued into still air

Numerical simulations have been conducted to clarify the effects of turbulence, in the onset of protrusions on liquid jet surfaces. The turbulences in the liquid jet were simulated by the Rankin vortices. The liquid jet surface was tracked numerically by the VOF method. From numerical simulations, the protrusions on the liquid jet surface are induced by the vortices in the liquid, whose rotational direction decelerates the jet surface. Despite the distance between vortices, the displacement of the liquid jet surface from the initial surface location increases linearly, in time, at almost the same growth rate. In the initial region, the growth rate of the displacement increases as the major semiaxis‐to‐minor semiaxis ratio of the ellipsoidal vortex increases. The initial growth rate of displacement is almost proportional to the vortex intensity. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(2): 141–152, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10078     

Modification of cyanate ester resin by soluble polyimides

Soluble polyimides (PIs) were prepared as random or multiblock types with 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride (6FDA) and 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (s‐BPDA) as acid dianhydride components and 4,4′‐bis(m‐aminophenoxy) diphenyl sulfone (m‐BAPS) as a diamine component by a one‐pot process and used to improve the brittleness of the cyanate ester resin. Random‐type PIs were more effective as modifiers than multiblock‐type PIs. The morphologies of the modified resins depended on PI structure, molecular weight, and concentration. The most effective modification of the cyanate ester resin was attained because of a heterogeneous phase structure composed of a flat matrix phase and phase‐inverted structures of the modified resin; a 15 wt % inclusion of a random PI (weight‐average molecular weight = 63,400) composed of 6FDA, s‐BPDA, and m‐BAPS (0.5/0.5/1.0 molar ratio) led to a 65% increase in the fracture toughness for the modified resin with a slight loss of flexural strength and a retention of flexural modulus and glass‐transition temperature, compared with the values for the unmodified resin. Water absorptivity of the modified resin was comparable to that of the unmodified resin up to 400 h, and then, water absorption of the modified resins increased considerably. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1–11, 2003