Deposition thickness based high-throughput nano-imprint template

International Technology Roadmap for Semiconductors 2003 projected nano-imprint lithography has the potential of high throughput, sub-20 nm resolution, and low cost [S.Y. Chou, P.R. Krauss, P.J. Renstrom, Appl. Phys. Lett. 67 (1995) 3144; Science 272 (1996) 85, J.A. Rogers, C. Mirkin, Mater. Res. Bull. 26 (2001)]. For nano-imprint lithography, a template with 1X resolution is required. The existing industrial infrastructure for supporting deep ultra violet 4X photo masks by e-beam and/or a laser beam scanning writer does not offer pitch (center-to-center distance of an array of patterned lines) less than ∼60 nm [<http://public.itrs.net/2003ITRS>]. For nano-imprint lithography to be accepted across the industry, a reproducible simple fabrication process to make a high resolution, single emboss template is essential [L. Jay Guo, J. Phys. D: Appl. Phys. 37 (2004) R123-R141]. Here we show, a general fabrication method and fabricated nano-imprint templates with sub-15 nm template line width and 10 nm pitch length through out the entire 200 mm wafer, varying the deposition thickness of multiple alternate films, using atomic layer deposition. Although multilayer nano-imprint templates and their exciting use have been demonstrated, [W.J. Dauksher et al., J. Vac. Sci. Technol. B 22 (2004) 3306, B. Heidari, et al., The 49th international conference on electron, ion and photon beam technology and nanofabrication, Orlando, Florida, 2005, William M. Tong, et al., Proc. SPIE 5751 (2005) 46-55, N.A. Melosh, A. Boukai, F. Diana, B. Gerardot, A. Badolato, P.M. Petroff, J.R. Heath, Science 300 (2003) 112] such a small pitch was not shown and either complex lattice mismatch-based epitaxially grown films or unconventional etch chemistry was used. The bare necessity was a simple and economical fabrication process for a high throughput nano-imprint template. In that context, we have developed a template fabrication process using classical micro-fabrication techniques. Successful use of these techniques made the template fabrication process simple, economical, and expedient. Also a novel technique to provide flexible and accurate alignment for nanowire patterning has been described. In this technique, nanowire patterning is accomplished on the entire wafer with a single impression. Industry level batch-fabrication of our scheme illustrates its reproducibility and manufacturability. We anticipate, this simple, economical and time saving technique will help researchers and developers to perform their experiment on nano-scale feature patterned substrates easily and conveniently.     

An online resource allocation algorithm to minimize system interference for inband underlay D2D communications

This paper addresses the research question of total system interference minimization while maintaining a target system sum rate gain in an inband underlay device‐to‐device (D2D) communication. To the best of our knowledge, most of the state of the art research works exploit offline resource allocation algorithms to address the research problem. However, in Long‐Term Evolution (LTE) and beyond systems (4G, 5G, or 5G+), offline resource allocation algorithms do not comply with the fast scheduling requirements because of the high data rate demand. In this paper, we propose a bi‐phase online resource allocation algorithm to minimize the total system interference for inband underlay D2D communication. Our proposed algorithm assumes D2D pairs as a set of variable elements whereas takes the cellular user equipment (UEs) as a set of constant elements. The novelty of our proposed online resource allocation algorithm is that it incurs a minimum number of changes in radio resource assignment between two successive allocations among the cellular UEs and the D2D pairs. Graphical representation of the simulation results suggests that our proposed algorithm outperforms the existing offline algorithm considering number of changes in successive allocation for a certain percentage of sum rate gain maintaining the total system interference and total system sum rate very similar.     

A packet scheduling scheme for 4G wireless access systems aiming to maximize revenue for the telecom carriers

Efficient utilization of network resources is a key goal for emerging BWAS. This is a complex goal to achieve due to the heterogeneous service nature and diverse QoS requirements of various applications that BWAS support. Packet scheduling is an important activity that affects BWAS QoS outcomes. This paper proposes a new packet scheduling mechanism that improves QoS in mobile wireless networks which exploit IP as a transport technology for data transfer between BWAS base stations and mobile users at the radio transmission layer. In order to improve BWAS QoS the new packet algorithm makes changes at both the IP and the radio layers. The new algorithm exploits handoff priority scheduling principles and takes into account buffer occupancy and channel conditions. The packet scheduling mechanism also incorporates the concept of fairness. The algorithm offers an opportunity to maximize the carriers’ revenue at various traffic situations. Simulation results were compared to well-known algorithms which demonstrated the new packet scheduling algorithm is able to provide a low handoff packet drop rate, low packet forwarding rate, low packet delay, ensure fairness amongst the users of different services and generates higher revenue. Furthermore this research proposes a new and novel measure named “Satisfaction Factor” to measure the efficacy of various scheduling schemes and finally proposes four performance metrics for NodeB’s of in Next Generation Wireless Networks.     

Novel dynamic semiempirical proton exchange membrane fuel cell model incorporating component voltages

This paper introduces a novel dynamic semiempirical model for the proton exchange membrane fuel cell (PEMFC). The proposed model not only considers the stack output voltage but also provides valid waveforms of component voltages, such as the no‐load, activation, ohmic, and concentration voltages of the PEMFC stack system. Experiments under no‐load, ramping load, and dynamic load conditions are performed to obtain various voltage components. According to experimental results, model parameters are optimised using the lightning search algorithm by providing valid theoretical ranges of parameters to the lightning search algorithm code. In addition, the correlation between the vapour and water pressures of the PEMFC is obtained to model the component voltages. Finally, all component voltages and the stack output voltage are validated by using the experimental/theoretical waveforms mentioned in previous research. The proposed model is also compared with a recently developed semiempirical model of PEMFC through particle swarm optimisation. The proposed dynamic model may be used in future in‐depth studies on PEMFC behaviour and in dynamic applications for health monitoring and fault diagnosis.     

Enhanced Mechanical Properties and Corrosion Behavior of Biodegradable Mg-Zn/HA Composite

Metallurgical and Materials Transactions A - Magnesium (Mg) and its alloys have shown potential for use in the biomedical industry due to their excellent biological performance and biodegradability...     

Temperature-Invariant Scaling for Compressible Turbulent Boundary Layers with Wall Heat Transfer

In a recent paper by Zhang et al. in 2012, a Mach number-invariant scaling was proposed to account for the effect of variation of free-stream Mach number in supersonic turbulent boundary layers. The present work focuses on the effect of variation of wall temperature with strong heating and cooling at the wall. Direct numerical simulation is used to study scaling and turbulence structure of a spatially evolving Mach 2 supersonic boundary layer at a friction Reynolds number of 500. A new scaling law is proposed to account for temperature-dependent fluid-property variations. This universal scaling appears superior to the existing models with the novelty that it applies not only for the mean-velocity profile but also extends to the turbulent transport, production, and dissipation terms in the budget of the turbulent kinetic energy.     

Multilayer Partially Homomorphic Encryption Text Steganography (MLPHE-TS): A Zero Steganography Approach

Wireless Personal Communications - This paper presents a Multilayer Partially Homomorphic Encryption Text Steganography, an invisible approach for covert communication. Existing text-based schemes...     

Rice-like CuO nanostructures for sensitive electrochemical sensing of hydrazine

In this work, a low temperature aqueous chemical growth methodology was used for the fabrication of CuO nanostructures. The as-synthesised nanostructures were then elaborately characterised by number of analytical techniques such as scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). The obtained nanostructures were observed to possess interlaced rice-shaped structural features with the length and width of individual rice determined to be in the range of 200–300 nm and 50–100 nm respectively. The unique nanostructures when utilised as electrode material exhibited excellent electro-catalytic potential towards oxidation of hydrazine in alkaline media. The excellent conductive of CuO added by the high surface area of obtained nanorice-like structures enabled development of highly sensitive (3087 µA mM⁻¹ cm⁻²), selective and stable electrochemical sensor for hydrazine. In addition, the successfully application of the developed sensor in spiked tap, bottled and industrial water samples for the detection of hydrazine suggested its feasibility for practical environmental application.

     

Modeling an ordered nanostructured cathode catalyst layer for proton exchange membrane fuel cells

A 3D mathematical model of an ordered nanostructured cathode catalyst layer (CCL) has been developed for proton exchange membrane (PEM) fuel cells. In an ordered nanostructured CCL, carbon nanotubes (CNTs) are used as support material for Pt catalyst, upon which a thin layer of proton-conducting polymer (Nafion) is deposited, which are then aligned along the main transport direction (perpendicular to the membrane) of various species. The model considers all the relevant processes in different phases of an ordered nanostructured CCL. In addition, the effect of Knudsen diffusion is accounted in the model. The model can predict not only the performance of an ordered nanostructured CCL at various operating and design conditions but also can predict the distributions of various fields in different phases of an ordered nanostructured CCL. The predicted nanostructured CCL performance with estimated membrane overpotential is validated with measured data found in the literature, and a good agreement is obtained between the model prediction and measured result. Moreover, a parametric study is conducted to investigate the effect of key design parameters on the performance of an ordered nanostructured CCL. In the absence of liquid water, it is found that oxygen diffusion in the pore phase is not the limiting factor for the performance of an ordered nanostructured CCL, owing to its parallel gas pores and high porosity. However, the transport of dissolved oxygen through the Nafion phase has a significant effect on the performance of an ordered nanostructured CCL. Further, it is found that increasing the spacing between CNTs results in a considerable drop in the performance of an ordered nanostructured CCL at the base case conditions considered in the simulation.     

Energy poverty in rural Bangladesh

Energy poverty is a well-established concept among energy and development specialists. International development organizations frequently cite energy-poverty alleviation as a necessary condition to reduce income poverty. Several approaches used to measure energy poverty over the past 20 years have defined the energy poverty line as the minimum quantity of physical energy needed to perform such basic tasks as cooking and lighting. This paper uses a demand-based approach to define the energy poverty line as the threshold point at which energy consumption begins to rise with increases in household income. At or below this threshold point, households consume a bare minimum level of energy and should be considered energy poor. This approach was applied using cross-sectional data from a comprehensive 2004 household survey representative of rural Bangladesh. The findings suggest that some 58 percent of rural households in Bangladesh are energy poor, versus 45 percent that are income poor. The findings also suggest that policies to support rural electrification and greater use of improved biomass stoves might play a significant role in reducing energy poverty.