An all-digital analog-to-digital converter with 12-/spl mu/V/LSB using moving-average filtering

A compact, high-resolution analog-to-digital converter (ADC) especially for sensors is presented. The basic structure is a completely digital circuit including a ring-delay-line with delay units (DUs), along with a frequency counter, latch, and encoder. The operating principles are: (1) the delay time of the DU is modulated by the analog-to-digital (A/D) conversion voltage and (2) the delay pulse passes through a number of DUs within a sampling (= integration) time and the number of DUs through which the delay pulse passes is output as conversion data. Compact size and high resolution were realized with an ADC having a circuit area of 0.45 mm/sup 2/ (0.8-/spl mu/m CMOS) and a resolution of 12 /spl mu/V (10 kS/s). Its nonlinearity is /spl plusmn/0.1% FS per 200-mV span (1.8-2.0 V), for 14-b resolution. Sample holds are unnecessary and a low-pass filter function removes high-frequency noise simultaneously with A/D conversion. Thus, the combination of this ADC and a digital filter that follows can eliminate an analog prefilter to prevent the aliasing before A/D conversion. Also, both this ADC can be shrunk and operated at low voltages, so it is an ideal means to lower the cost and power consumption. Drift errors can be easily compensated for by digital processing.     

Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125     

A new bubble-point-pressure correlation for the binary LiBr/H2O solution

In accord with the increasing concern about the global environmental issues, the absorption refrigeration heat-pump systems are currently being considered very promising and attractive. For the purpose of supporting the advanced R&D technology in this area, we have developed a novel correlation to represent the bubble-point pressures of LiBr H₂O solutions. The developed correlation covers the most extensive range of validity ever proposed: 273–483 K for temperatures, 0.05 kPa to 1.0 MPa for pressures. and 29 76 wt% LiBr for concentrations.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994. Boulder, Colorado, U.S.A.     

Bubble-point pressures and liquid densities of binary R-125 + R-143a System

Bubble-point pressures and saturated-liquid densities of the binary R-135 (pentafuoroethane) + R- 143a ( 1, 1, 1-trifluoroethane) system have been measured for several compositions at temperatures from 280 to 330 K by means of a magnetic densimeter coupled with a variable-volume cell mounted with a metallic bellows. The experimental uncertainties of the temperature, pressure. and density measurements and the composition determination were estimated to be within ±15 mK, ±13 k Pa, ±0.2%, and ±0.1 wt%, respectively. The purities of the samples used throughout the measurements are 99.98 wt% for R-125 and 99.0 mol % for R- 143a. Based on the present data, the thermodynamic behavior of the vapor-liquid equilibria of this binary refrigerant mixture has been evaluated by using the Peng-Robinson equation for the bubble-point pressures, and the modified Hankinson-Brobst-Thomson equation for the saturated-liquid densities. This was done to identify the optimized binary interaction parameters.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

0.5-μm 3.3-V BiCMOS standard cells with 32-kilobyte cache andten-port register file

BiCMOS standard cell macros, including a 0.5-W 3-ns register file, a 0.6-W 5-ns 32-kbyte cache, a 0.2-W 3-ns table look-aside buffer (TLB), and a 0.1-W 3-ns adder, are designed with a 0.5-μm BiCMOS technology. A supply voltage of 3.3 V is used to achieve low power consumption. Several BiCMOS/CMOS circuits, such as a self-aligned threshold inverter (SATI) sense amplifier and an ECL HIT logic are used to realize high-speed operation at the low supply voltage. The performance of the BiCMOS macros is verified using a fabricated test chip     

A 1.5-V full-swing BiCMOS logic circuit

A BiCMOS logic circuit applicable to sub-2-V digital circuits has been developed. A transiently saturated full-swing BiCMOS (TS-FS-BiCMOS) logic circuit operates twice as fast as CMOS at 1.5-V supply. A newly developed transient-saturation technique, with which bipolar transistors saturate only during switching periods, is the key to sub-2-V operation because a high-speed full-swing operation is achieved to remove the voltage loss due to the base-emitter turn-on voltage. Both small load dependence and small fan-in dependence of gate delay time are attained with this technique. A two-input gate fabricated with 0.3-μm BiCMOS technology verifies the performance advantage of TS-FS-BiCMOS over other BiCMOS circuits and CMOS at sub 2-V supply     

Hydrogen absorption by Pd-coated ZrNi prepared by using Barrel-Sputtering System

To improve the durability of hydrogen storage materials against surface poisoning by impurity gases, effectiveness of Pd-coating layer prepared by using a Barrel-Sputtering System was examined for ZrNi powder. The effectiveness of Pd-coating was evaluated by activation temperature, at which Pd/ZrNi poisoned by air could be activated to absorb hydrogen. Characterization of Pd-coated ZrNi (denoted as Pd/ZrNi) by scanning electron microscopy, electron probe microanalysis and X-ray diffraction showed that a uniform Pd-coating layer was formed with the barrel-sputtering system. It was found that the poisoned Pd/ZrNi sample could be activated even at 423 K to absorb hydrogen at room temperature. This exhibits remarkable contrast to bare ZrNi, which could be only activated appreciably above 1073 K. It is concluded that the Pd-coating by barrel sputtering is quite effective to avoid the effect of surface poisoning of powdery hydrogen storage materials. However, the activation at excessively high temperature resulted in the loss of high activity to absorb hydrogen. It was concluded that this phenomenon was associated with reactions between Pd and ZrNi to form PdZr and other byproducts.     

Effects of some calcium-related agents on the protoplast transfection of Lactobacillus casei with phage PL-1 DNA

An audit of the treatment procedures routinely adopted by maxillofacial and oral surgeons for the removal of impacted third molars under general anaesthesia was undertaken in South Africa. Most maxillofacial and oral surgeons agree on the method of bone removal, the prescribing of antibiotics, analgesic agents and mouthwashes, the suturing of the incision wound and the post-operative review of patients. The results were compared to a similar study undertaken by Falcon and Roberts (1992) in the UK. With the exception of the method of bone removal, maxillofacial and oral surgeons in both groups share a similar approach to the treatment procedures adopted in the removal of impacted third molars. Some variability, however, existed in both studies with regard to the use of intra-operative local anaesthetic agents, the administration of peri-operative steroids and the use of non-steroidal anti-inflammatory agents.     

Nosocomial diarrhoea in the elderly due to enterotoxigenic Clostridium perfringens

Zinc is an important trace element for immune function. Here, we show that zinc addition in a serum- and lipopolysaccharide-free cell culture system leads to significantly enhanced levels of interleukin 1 beta (IL-1 beta) and tumour necrosis factor alpha (TNF-alpha) and to expression of the corresponding mRNA in human peripheral blood mononuclear cells (PBMC). Structurally related divalent cations like cobalt, nickel, and mercury also partially increase monokine secretion but to a much lower and thus insignificant extent. They fail to induce mRNA of TNF-alpha after 3 h of culture. Therefore, monokine induction is a zinc-specific effect influenced by the physicochemical properties of the ion. Confirmation of the unique significance of zinc for immune function provides a better understanding of the mechanisms of specific zinc-mediated immune modulation.     

Analysis of mutational specificity induced by heterocyclic amines in the lacZ gene of Escherichia coli

Mutational spectra induced by different heterocyclic amines were characterized and compared with those obtained from diethylnitrosamine and N-methyl-N-nitrosourea. Mutation classes were identified by means of a series of mutant lacZ genes in F' episomes in Escherichia coli engineered to detect specifically each of two transitions, four transversions and five kinds of frameshift events. More than 99.5% of the mutations induced by heterocyclic amines were frameshift mutations. -2(C.G-G.C) frameshifts were favored over other types, such as +1(G.C), -1(G.C), +1(A.T) and -1(A.T), except when 3-amino-1,4-dimethyl-5H-pyrido[4,3-b]indole (Trp-P-1) was administered. -1(G.C) and +1(G.C) frameshifts predominate following Trp-P-1 treatment. A small number of G.C-->T.A transversions were induced by the treatment with 2-amino-3,4-dimethylimidazo[4,5-f]quinoline as well as with several other heterocyclic amines examined. Since G.C-->T.A transversions, but not frameshift mutations, are reported to play a role in heterocyclic amine-induced activation of the c-Ha-ras protooncogene or inactivation of the p53 tumor suppressor gene, the low level of base substitutions, particularly G.C-->T.A transversions, may represent a partial explanation for the relatively modest carcinogenic activity of heterocyclic amines, despite their extraordinarily strong mutagenicity in the Salmonella mutation assay.