Biosynthesis and identification of volatiles released by the myxobacterium Stigmatella aurantiaca

The volatiles released by agar plate cultures of two strains of the myxobacterium Stigmatella aurantiaca (strains Sg a15 and DW4/3-1) were collected in a closed-loop stripping apparatus (CLSA) and analyzed by GC-MS. Large numbers of substances from different compound classes (ketones, esters, lactones, terpenes, and sulfur and nitrogen compounds) were identified; several of them are reported from natural sources for the first time. The volatiles 2-methyltridecan-4-one (17), its isomer 3-methyltridecan-4-one (20), and the higher homologue 2-methyltetradecan-4-one (18) were identified in the extracts of both strains and were synthesized. In addition, strain Sg a15 produced 2,12-dimethyltridecan-4-one (19), 2-methyltridec-2-en-4-one (23), and a series of phenyl ketones, among them 1-phenyldecan-1-one (14) and 9-methyl-1-phenyldecan-1-one (16), whereas strain DW4/3-1 emitted traces of 10-methylundecan-2-one (21). The biosynthesis of 14 and 16 was examined in feeding experiments with deuterated precursors carried out on agar plate cultures. The leucine-derived starter unit isovalerate was shown to be incorporated into 16, as was phenylalanine-derived benzoic acid into both 14 and 16. The results point to formation both of the phenyl ketones and of the structurally related aliphatic ketones through an unusual head-to-head coupling between a starter unit such as benzoyl-CoA and a fatty acyl-CoA, followed by decarboxylation.     

Evaluation and characterization of ammoniumpolyphosphate–pentaerythritol‐based systems for intumescent coatings

Intumescent coatings are increasingly used as a method of passive fire protection on steel constructions. By forming a carbon network and releasing a blowing agent, the thin intumescent film swells 100‐fold at elevated temperatures. The highly insulating foam effectively prevents the load bearing steel from reaching its critical temperature at which it looses its mechanical properties and collapses. The role of the carbon donor in intumescent coatings has been studied. Comparison in temperature development, foaming ratios, and rheological behavior has been performed between formulations containing pentaerythritol (penta), di–penta, and tri–penta. A simulated fire test, in which the temperature development during intumescence was studied, showed that the formulations containing penta were considerably more efficient in keeping a low temperature throughout the process. A more rapid temperature development was displayed when using di–penta and tri–penta as the carbon donor. Rheometer tests indicate that penta formulations enter the intumescent process at a lower temperature and stays in it for a longer time than di–penta and tri–penta formulations. Furthermore, the crossover temperature and maximum phase angle are shifted towards higher temperatures by replacing penta with di–penta and with tri–penta in the formulations, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 748–753, 2007     

A Quantitative Analysis of Current Practices in Optical Flow Estimation and the Principles Behind Them

The accuracy of optical flow estimation algorithms has been improving steadily as evidenced by results on the Middlebury optical flow benchmark. The typical formulation, however, has changed little since the work of Horn and Schunck. We attempt to uncover what has made recent advances possible through a thorough analysis of how the objective function, the optimization method, and modern implementation practices influence accuracy. We discover that “classical” flow formulations perform surprisingly well when combined with modern optimization and implementation techniques. One key implementation detail is the median filtering of intermediate flow fields during optimization. While this improves the robustness of classical methods it actually leads to higher energy solutions, meaning that these methods are not optimizing the original objective function. To understand the principles behind this phenomenon, we derive a new objective function that formalizes the median filtering heuristic. This objective function includes a non-local smoothness term that robustly integrates flow estimates over large spatial neighborhoods. By modifying this new term to include information about flow and image boundaries we develop a method that can better preserve motion details. To take advantage of the trend towards video in wide-screen format, we further introduce an asymmetric pyramid downsampling scheme that enables the estimation of longer range horizontal motions. The methods are evaluated on the Middlebury, MPI Sintel, and KITTI datasets using the same parameter settings.     

The future of vehicle propulsion – combustion engines and alternatives

Topics in Catalysis - Increasing shortage on energy resources as well as future emission legislation development increase the pressure to develop more efficient, environmentally friendly propulsion...     

EPR Study of CO Adsorption onto CoZSM-5 Zeolite: Evidence for Spin Crossover upon Coordination and |z2, 2A1〉 Ground State

Adsorption of CO onto dehydrated cobalt-exchanged ZSM-5 zeolite was studied by CW-EPR techniques. It is shown that the reversible formation of a low spin carbonyl ¹{Co(CO) _n }⁷ adduct upon addition of carbon monoxide at p _CO>50–60 Torr involves significant change in the spin state of Co²⁺ from S=3/2 to 1/2. The spin Hamiltonian parameters of the adduct g _x =2.222, g _y =2.184, g _z =2.011, |A _x |=3.8 mT, |A _y |=3.2 mT, |A _z |=7.9 mT were determined by a computer simulation and further discussed in terms of the possible ground state and molecular structure. It is shown that the ¹{Co(CO) _n }⁷ cage complex exhibits a C_2v symmetry with |z ²,²A₁ ground state.     

Influence of operation parameters on the separation of mixtures by pervaporation and vapor permeation with inorganic membranes. Part 1: Dehydration of solvents

The separation performance of two different commercially available tubular inorganic membranes was studied for solvent dehydration. The separation layers consisted of A-type zeolite and microporous silica. The membrane characteristics were determined as function of operating conditions such as feed composition, temperature, and permeate pressure in pervaporation and vapor permeation. Among different membranes of the same batch, flux and selectivity were reproducible within 10%. The partial flux of water as the preferentially permeating component increases linearly with the water vapor pressure difference between feed and permeate and depends only marginally (viscosity influence) upon the properties of the organic component. The flux of the organic (retained) component is low and can best be described by assuming a substance and membrane specific permeance (flux over partial pressure difference) that is independent of composition. At very low water concentration in the feed one would expect a strong increase in permeability of the retained component through non-zeolite pores and larger silica pores as predicted by pure component measurements. However, this effect was not observed in mixtures within the concentration range studied here. A temperature rise improves flux rates exponentially while selectivity remains high. Thus, higher module cost in comparison to polymeric membranes can be compensated by reduced membrane area if a higher operating temperature can be chosen. Flux and selectivity decline as a function of permeate pressure with decreasing driving force. In vapor permeation with inorganic membranes superheating of the vaporous feed improves their performance while for polymeric materials a steep flux decline is observed. High flux and selectivity are obtained in the separation of water from alcohols. The normalized flux values of the A-type zeolite membrane are roughly 10 kg/m² h bar with a mixture selectivity of 2000 for methanol, 4000 for ethanol and 8000 for n-butanol. The average permeance of the amorphous silica membrane lies above 12 kg/m² h bar with mixture selectivity of 50 for methanol, 500 for ethanol and 2000 for n-butanol. The separation mechanism is mainly based on adsorption and diffusion enhanced by shape selectivity and size exclusion in some cases. The transport characteristics could be described with a simple transport model based on normalized permeate fluxes. With regard to the operation stability of the membranes, no deterioration of the performance was observed for the A-type zeolite in solvent dehydration or in separation of water from reaction mixtures. The silica membrane showed an initial conditioning effect involving a rearrangement of Si-OH groups with an increase in selectivity and decrease in flux of about 30%. After a few hours the performance stabilized and remained constant during further operation.     

Observation of single-walled carbon nanotubes by photoemission microscopy

Single-walled carbon nanotube networks grown on SiO₂ pillars were studied by means of scanning photoemission microscopy. The individual nanotubes or nanotube bundles growing from the pillar tops were observed in C 1s images. Band bending near catalytic Fe/nanotube contacts in an end-bonded configuration was studied by measuring C 1s spectra along the tube axes. Within our experimental resolution, no band bending was observed. This implies that the depletion width is less than the spatial resolution of the scanning photoemission microscope (90 nm) or that the amount of the band bending is less than 0.1 eV.     

Comparing global land-cover products – implications for geoscience applications: an investigation for the trans-boundary Mekong Basin

In this article we present the results of a comparison of six globally available land-cover products for the Mekong Basin – an area that spans 795,000 km² and comprises parts of six riparian countries: China, Myanmar, Thailand, Laos, Cambodia, and Vietnam. The basin covers most climatic zones: from high-altitude, snow-covered mountainous regions in the north, to subtropical and tropical rainforest areas and agricultural land further south. The geopolitically important region not only is home to over 72,000,000 inhabitants, but also is a centre of attention of several environmental modelling experts, trying to assess future hydrologic dynamics, climate variability, as well probable land-use developments in the area.

We compare land-cover products of the University of Maryland, UMD 1992–1993, the GLC 2000 product, the GlobCover products of 2004–2006 and 2009, as well as the MODIS-derived land-cover products of 2001 and 2009. For harmonization of individual legends, the Land Cover Classification System, LCCS, has been employed. However, even after harmonization, cross-tabulation among the products reveals extreme differences, where the impact of differing classification algorithms weighs higher than the impact of temporal coincidence of products. Especially, differences within mixed-vegetation classes are large, strongly impacting the overall assessment of forested land, other vegetated land, and even cultivated land in the Mekong Basin. The findings presented here are of high relevance for the modelling community as well as Mekong-related environmental studies, which should consider global remote-sensing-derived products with caution and solid background knowledge.     

Continuous Levels‐of‐Detail and Visual Abstraction for Seamless Molecular Visualization

Molecular visualization is often challenged with rendering of large molecular structures in real time. We introduce a novel approach that enables us to show even large protein complexes. Our method is based on the level‐of‐detail concept, where we exploit three different abstractions combined in one visualization. Firstly, molecular surface abstraction exploits three different surfaces, solvent‐excluded surface (SES), Gaussian kernels and van der Waals spheres, combined as one surface by linear interpolation. Secondly, we introduce three shading abstraction levels and a method for creating seamless transitions between these representations. The SES representation with full shading and added contours stands in focus while on the other side a sphere representation of a cluster of atoms with constant shading and without contours provide the context. Thirdly, we propose a hierarchical abstraction based on a set of clusters formed on molecular atoms. All three abstraction models are driven by one importance function classifying the scene into the near‐, mid‐ and far‐field. Moreover, we introduce a methodology to render the entire molecule directly using the A‐buffer technique, which further improves the performance. The rendering performance is evaluated on series of molecules of varying atom counts.