Evaluation of UV/H2O2 treatment for the oxidation of pharmaceuticals in wastewater

Advanced oxidation treatment using low pressure UV light coupled with hydrogen peroxide (UV/H₂O₂) was evaluated for the oxidation of six pharmaceuticals in three wastewater effluents. The removal of these six pharmaceuticals (meprobamate, carbamazepine, dilantin, atenolol, primidone and trimethoprim) varied between no observed removal and >90%. The role of the water quality (i.e., alkalinity, nitrite, and specifically effluent organic matter (EfOM)) on hydroxyl radical (OH) exposure was evaluated and used to explain the differences in pharmaceutical removal between the three wastewaters. Results indicated that the efficacy of UV/H₂O₂ treatment for the removal of pharmaceuticals from wastewater was a function of not only the concentration of EfOM but also its inherent reactivity towards OH. The removal of pharmaceuticals also correlated with reductions in ultraviolet absorbance at 254 nm (UV₂₅₄), which offers utilities a surrogate to assess pharmaceutical removal efficiency during UV/H₂O₂ treatment.     

Effects of chronic run training on Na+-dependent Ca2+ efflux from rat left ventricular myocytes

The effects of endurance run training on Na+-dependent Ca2+ regulation in rat left ventricular myocytes were examined. Myocytes were isolated from sedentary and trained rats and loaded with fura 2. Contractile dynamics and fluorescence ratio transients were recorded during electrical pacing at 0.5 Hz, 2 mM extracellular Ca2+ concentration, and 29 degreesC. Resting and peak cytosolic Ca2+ concentration ([Ca2+]c) did not change with exercise training. However, resting and peak [Ca2+]c increased significantly in both groups during 5 min of continuous pacing, although diastolic [Ca2+]c in the trained group was less susceptible to this elevation of intracellular Ca2+. Run training also significantly reduced the rate of [Ca2+]c decay during relaxation. Myocytes were then exposed to 10 mM caffeine in the absence of external Na+ or Ca2+ to trigger sarcoplasmic reticular Ca2+ release and to suppress cellular Ca2+ efflux. This maneuver elicited an elevated steady-state [Ca2+]c. External Na+ was then added, and the rate of [Ca2+]c clearance was determined. Run training significantly reduced the rate of Na+-dependent clearance of [Ca2+]c during the caffeine-induced contractures. These data demonstrate that the removal of cytosolic Ca2+ was depressed with exercise training under these experimental conditions and may be specifically reflective of a training-induced decrease in the rate of cytosolic Ca2+ removal via Na+/Ca2+ exchange and/or in the amount of Ca2+ moved across the sarcolemma during a contraction.     

Occurrence of ethanolamine- and choline-containing plasmalogens in adipose tissue

Analysis of phospholipids in porcine, bovine and rat adipose tissue revealed a relatively high level of plasmalogens (O-alk-1-enyl lipids). About 50% of the ethanolamine phospholipids in the pig and beef samples consisted of alk-1-enylacylglycerophosphorylethanolamine, and the corresponding value for the rat sample was near 35%. In the ethanolamine and choline phospholipid fractions, theO-alk-1-enyl moieties were almost exclusively 16∶0, 18∶0 and 18∶1, whereas the acyl moieties had chain lengths ranging from 16 to 22 carbon atoms with a high degree of unsaturation.     

Noninvasive measurement of distal radius instability

Except for subjective clinical criteria, there is no formal definition of distal radius fracture instability in the literature. The purposes of this ex vivo biomechanical study were (1) to provide an objective mechanical definition of fracture instability and (2) to demonstrate a noninvasive method that allows for direct measurement of instability. The following 3 questions are addressed: (1) Can the stability of distal radius fractures be measured using computed tomography (CT)? (2) Are the stability measurements reproducible? (3) How does external fixation change stability? A CT technique is described that was used to measure displacement of fracture fragments and measure the compliance of ex vivo distal radius fractures before and after external fixation. Validation studies of the CT technique revealed a mean coefficient of variation of 0.38. There was a linear relationship between measured and known displacements for all 3 orthogonal planes (coefficient of determination 0.99; p < .01). There was significant fracture displacement with loads as small as 20 N. The slope of the load-displacement curve (structural compliance) provided a quantitative measure of fracture instability. Fracture compliance decreased up to 69% after application of an external fixator.     

Optimal design of sustainable cellulosic biofuel supply chains: Multiobjective optimization coupled with life cycle assessment and input–output analysis

This article addresses the optimal design and planning of cellulosic ethanol supply chains under economic, environmental, and social objectives. The economic objective is measured by the total annualized cost, the environmental objective is measured by the life cycle greenhouse gas emissions, and the social objective is measured by the number of accrued local jobs. A multiobjective mixed‐integer linear programming (mo‐MILP) model is developed that accounts for major characteristics of cellulosic ethanol supply chains, including supply seasonality and geographical diversity, biomass degradation, feedstock density, diverse conversion pathways and byproducts, infrastructure compatibility, demand distribution, regional economy, and government incentives. Aspen Plus models for biorefineries with different feedstocks and conversion pathways are built to provide detailed techno‐economic and emission analysis results for the mo‐MILP model, which simultaneously predicts the optimal network design, facility location, technology selection, capital investment, production planning, inventory control, and logistics management decisions. The mo‐MILP problem is solved with an ε‐constraint method; and the resulting Pareto‐optimal curves reveal the tradeoff between the economic, environmental, and social dimensions of the sustainable biofuel supply chains. The proposed approach is illustrated through two case studies for the state of Illinois. © 2011 American Institute of Chemical Engineers AIChE J, 2012     

Foetal alcohol syndrome in Saskatchewan: unchanged incidence in a 20-year period

Ethers and thioethers of monosaccharides have been synthesised which show potent toxicity to mouse (LD50 > or = 4 g.kg-1 O.W. and 0.2 to 1.5 g.kg-1 I.P.W.). A study of calcium antagonist activity for the full series of compounds indicated that the activity was similar for both O- and S- ethers and maximum activities were observed for monoacetoneglucose ethers possessing carbon chain close to 8 carbons.     

Fast Global Illumination on Dynamic Height Fields

We present a real-time method for rendering global illumination effects from large area and environmental lights on dynamic height fields. In contrast to previous work, our method handles inter-reflections (indirect lighting) and non-diffuse surfaces. To reduce sampling, we construct one multi-resolution pyramid for height variation to compute direct shadows, and another pyramid for each indirect bounce of incident radiance to compute inter-reflections. The basic principle is to sample the points blocking direct light, or shedding indirect light, from coarser levels of the pyramid the farther away they are from a given receiver point. We unify the representation of visibility and indirect radiance at discrete azimuthal directions (i.e., as a function of a single elevation angle) using the concept of a "casting set" of visible points along this direction whose contributions are collected in the basis of normalized Legendre polynomials. This analytic representation is compact, requires no precomputation, and allows efficient integration to produce the spherical visibility and indirect radiance signals. Sub-sampling visibility and indirect radiance, while shading with full-resolution surface normals, further increases performance without introducing noticeable artifacts. Our method renders 512×512 height fields (> 500K triangles) at 36Hz.     

Synthetic Studies of Biomimetic Diels–Alder Processes toward the Helicterin Family of Natural Products

Although the [2.2.2]-bicyclooctene core of the helicterin, helisorin, and helisterculin class of neolignan natural products could conceivably arise in Nature via Diels–Alder reactions, synthetic explorations have revealed that only under very non-biomimetic conditions can such cycloadditions be performed. In this article, we provide a personal account of explorations towards this natural product family, sharing some additional unpublished synthetic work to test the viability of an alternate, Diels–Alder-based, biogenetic hypothesis for the generation of this unique collection of secondary metabolites.     

An Inter-Comparison of Two Black Carbon Aerosol Instruments and a Semi-Continuous Elemental Carbon Instrument in the Urban Environment

Aerosol absorption coefficients were obtained using two versions of the Magee Scientific Aethalometer and a Particle Soot Absorption Photometer (PSAP) in Riverside, California during July and August of 2005. These measurements were subsequently compared to each other and to hourly elemental carbon (EC) mass concentrations as determined by a Sunset Labs semi-continuous OCEC analyzer. Measurements from all four instruments were shown to be highly correlated (R ² = 0.83 to 0.92). Differences between absorption values measured by the PSAP and the Aethalometer were found to be dominated by differences in the filter media used by the respective instruments. Comparison of optical and thermal measurements revealed that the specific attenuation cross section (σ _ATN ) of light absorbing carbon (LAC) varied as a function of the time of the day, most notably during weekdays. Minimum σ _ATN values were observed during morning rush hour when EC concentrations were at their greatest and maxima were seen in the late afternoon. These variations correlated with changes in the OC/EC ratio and the Angstrom exponent for absorption, which is consistent with changes in the mixing state of elemental carbon associated with secondary aerosol condensation on primary EC particles.     

Dimensional analysis of ionic transport problems in hydrated cement systems: Part 1. Theoretical considerations

The validity of the local equilibrium assumption in hydrated cement systems that a particular chemical reaction is instantaneous with respect to transport is examined using a dimensional analysis of electrochemical transport in cementitious materials. The transport equation parameters are scaled, resulting in a dimensionless equation. The dimensionless coefficient for each reaction/transport term determines its relative contribution to the overall process. The diffusion of ions in a reactive porous medium can be fully described on the basis of six independent dimensionless numbers. The analysis demonstrates that the kinetics of the reaction determine the appropriate time constant for the analysis. The formalism is applied to the dissolution of calcium hydroxide under an electrochemical potential gradient. The results are in agreement with previous observations and demonstrate quantitatively the local equilibrium hypothesis is valid in most practical cases where ions are transported by diffusion through a saturated material.