Thermomechanical Responses of Microcracks in a Honeycomb Particulate Filter

Manufacturing honeycomb-structured catalysts require a careful understanding of the microstructure of the solid substrate and its dependence on thermal-processing conditions. Herein, it is the thermal responses of microcracks in an uncoated microcracked aluminum titanate honeycomb catalyst is investigated by analyzing the material's resonance frequency using the high-temperature impulse excitation technique. The resonance frequencies are presented as Young's modulus values to avoid sample size effects. Dynamic Young's modulus measurements show closed-loop hysteresis due to microcracks healing and reopening, causing a reversible response. The hysteresis is further used to understand microcracks’ dependence on critical thermal-processing conditions used in a catalyst manufacturing plant, including peak operating temperature (800–1000 °C), dwell period (1–3 h), and heating rates (1–5 °C min⁻¹). Microcracks are observed to have two healing responses: instantaneous and delayed healing. Both responses significantly influence the design of catalyst manufacturing. Complete reopening of microcracks from their healing temperature (1150 °C) is a very time-consuming process (50–60 h). However, it is shown in the analysis that microcrack relaxation is a critical phenomenon that must be considered in quality-controlled environments.     

Oxygen enhanced crack growth in nickel-based superalloys and materials damage prognosis

This paper summarizes the results from a comprehensive multidisciplinary study to better understand the role of niobium and other strengthening elements in enhancing crack growth by oxygen in nickel-based superalloys at high temperatures, and considers its importance for materials damage prognosis and life cycle engineering in high temperature service. Three γ′ strengthened powder metallurgy (P/M) alloys, with 0, 2.5 and 5 wt pct Nb and comparable volume fractions (about 53 vol pct) of γ′′ precipitates, were specially designed for this study. Coordinated crack growth, microstructural and surface chemistry studies were conducted on the alloys. They were complemented by oxidation studies of Nb, Ni₃Nb, NbC, Ni₃Al and Ni₃Ti, and analyses of fracture surfaces of interrupted crack growth specimens by X-ray photoelectron spectroscopy (XPS). The findings taken in toto show that oxygen enhancement of crack growth is the result of the formation of a brittle film of surface oxides along grain boundaries and interfaces ahead of the crack tip by the preferential oxidation of Nb, Ti and Al in the Nb-rich carbides and Ni₃Al, Ni₃Ti and Ni₃Nb (in Inconel 718) precipitates. The results also showed that the oxidation of Nb-rich carbides alone can significantly enhance crack growth in oxygen. The findings are discussed in relation to the previously proposed crack growth mechanisms, and their applications.     

Contamination of potable roof-collected rainwater in Auckland, New Zealand

One-hundred and twenty-five domestic roof-collected rainwater supplies in four rural Auckland districts were investigated in a cross-sectional survey to determine water quality. Samples of cold faucet water were analysed for physico-chemical and microbiological determinands, including metals (zinc, copper and lead), bacterial indicator organisms--heterotrophic plate count (HPC), total coilforms (TC), faecal coliforms (FC), enterococci (ENT), bacterial pathogens including Salmonella spp., Legionella spp., Campylobacter spp., Aeromonas spp. and the protozoa, Cryptosporidium and Giardia. Twenty-two supplies (17.6%) exceeded one or more of the maximum acceptable values (MAV) or maximum guideline values for chemical determinands of the New Zealand Drinking Water Standards (NZDWS) and 70 (56.0%) supplies exceeded the microbiological criteria of < 1 FC/100 mL. Eighteen supplies (14.4%) exceeded the NZDWS MAV for lead of 0.01 mg/L and three (2.4%) exceeded that for copper, of 2 mg/L. Those supplies with lead or galvanised iron comprising part of the roof or collecting system were more likely to show lead contamination (p = 0.019) as were those supplies with a pH less than 7 (p = 0.013). The presence of the indicator organisms HPC, TC, FC and ENT were all significantly correlated with one another. Aeromonas spp. were identified in 20 (16.0%) supplies. There was a positive association between the presence of Aeromonas and the bacterial indicator organisms. Households reporting at least one member with gastrointestinal symptoms in the month prior to sampling, were more likely to have Aeromonas spp. identified in their water supply than those households without symptoms (odds ratio 3.22, 95% CI 1.15-9.01, p = 0.021). Salmonella typhimurium was detected in one of 115 (0.9%) supplies. Legionella spp. and Campylobacter spp. were not detected. There were 50 supplies sampled for protozoa (sampling criteria: > or = 30 FC or > or = 60 ENT). Cryptosporidium oocysts were detected in 2 (4%) of these. Giardia was not detected. This study demonstrates that roof-collected rainwater systems provide potable supplies of relatively poor physiochemical and microbiological quality in the Auckland area. Further research is required on Aeromonas spp. as potential indicators of both microbiological quality and health risk along with design and maintenance strategies to minimise contamination of potable roof-collected rainwater supplies.     

Microbial partitioning to settleable particles in stormwater

The degree to which microbes in the water column associate with settleable particles has important implications for microbial transport in receiving waters, as well as for microbial removal via sedimentation (i.e. detention basins). The partitioning behavior of several bacterial, protozoan and viral indicator organisms is explored in three urban streams under both storm and dry weather conditions. The fraction of organisms associated with settleable particles in stormwater is estimated through use of a centrifugation technique which is calibrated using suspensions of standard particles (e.g., glass, latex). The fraction of organisms associated with settleable particles varies by type of microbe, and the partitioning behavior of each organism generally changes between dry weather and storm conditions. Bacterial indicator organisms (fecal coliforms, Escherichia coli, enterococci) exhibited relatively consistent behavior, with an average of 20-35% of organisms associated with these particles in background samples and 30-55% in storm samples. Clostridium perfringens spores exhibited the highest average level of particle association, with storm values varying from 50% to 70%. Results related to total coliphage partitioning were more variable, with 20-60% associated with particles during storms. These estimates should be valuable in surface water quality modeling efforts, many of which currently assume that all microbes exist as free (unattached) organisms.     

Intra-storm variability in microbial partitioning and microbial loading rates

Association with particles in the water column can have a significant impact on microbial fate and transport. This study analyzed multiple stormwater samples taken throughout the duration of three separate storms (at two different sites) to evaluate the fraction of microbes partitioning to denser "settleable" particles and to examine how partitioning behavior varied over the course of a storm. Intra-storm sampling also allowed for estimates of microbial loading rates (both total and particle-associated) and cumulative storm-induced microbial load. Five different indicator organisms were examined, with the fraction of microbes associated with settleable particles assessed via a calibrated centrifugation method. Partitioning behavior varied across microorganism type, with an average of 40% of fecal coliforms, Escherichia coli, and enterococci associating with settleable particles, compared to approximately 65% of Clostridium perfringens spores and only 13% of total coliphage. Partitioning remained fairly constant for each type of organism throughout storm events. Nonetheless, higher concentrations of both settleable particles and microbes entering the water column soon after the onset of a storm led to higher loading rates of settleable microbes in the storm's earliest stages, a trend that could have important implications for the design of stormwater management structures (e.g., detention basins). Estimates of cumulative storm-induced microbial loading suggested that one day's worth of storm loading can be the equivalent of months, or even years, of dry-weather loading.     

Electrical and optical properties of the four-terminaldouble-heterostructure opto-electronic switch

The authors extend the theory of the three-terminal double-heterostructure opto-electronic switch (DOES) device, in which the third terminal (the injector) makes contact to the bulk section of the active region, to the four-terminal DOES, in which the fourth terminal (the source) accesses the inversion channel at the n-n heterojunction. The source is shown to be capable of initiating switching at lower current densities than the injector. The effects of incident light on the device are also examined, yielding results similar to the injection of carriers at the source and injector. Incomplete ionization of the charge sheet and two-dimensional quantum effects in the channel, which have been neglected in previous DOES models, have been included. These effects are shown to affect significantly the characteristics of the device and to reduce the discrepancy between simulated and experimental results     

Effects of bulk trapping on the memory characteristics of thick-oxide MNOS variable-threshold capacitors

Charge-storage measurements have been performed at room temperature on thick-oxide MNOS structures using on automatic measuring system which allows a detailed and quite accurate investigation of the hysteresis loops (flat-band voltage versus stress voltage characteristics) of such devices. The experimental data have revealed several anomalous features, previously unreported in the literature, which are very general properties of double-layer devices. It is found that the initial hysteresis loop of a virgin device is very similar to the ‘conventional’ hysteresis loop, with flat bottoms and tops and steeply-rising sides. However, the second and subsequent hysteresis loops show dramatic changes in the flat-band voltage in the formerly flat regions. The results are interpreted in a selfconsistent manner, in terms of trapping phenomena throughout the bulk of both insulator regions. The trapped charge is found to produce strong internal fields that cause redistribution of the trapped charge in both the nitride and the oxide; it is these trapping effects which lead to the dramatic changes in the hysteresis loops after the initial pulse sequence. The existence of trapping levels in the bulk of the nitride is a necessary extension of the idealized model in which trapping levels are assumed to exist only at the oxide-nitride interface.     

Mesoporous Silicon‐PLGA Composite Microspheres for the Double Controlled Release of Biomolecules for Orthopedic Tissue Engineering

In this study, poly(dl ‐lactide‐co‐glycolide)/porous silicon (PLGA/pSi) composite microspheres, synthesized by a solid‐in‐oil‐in‐water (S/O/W) emulsion method, are developed for the long‐term controlled delivery of biomolecules for orthopedic tissue engineering applications. Confocal and fluorescent microscopy, together with material analysis, show that each composite microsphere contained multiple pSi particles embedded within the PLGA matrix. The release profiles of fluorescein isothiocyanate (FITC)‐labeled bovine serum albumin (FITC‐BSA), loaded inside the pSi within the PLGA matrix, indicate that both PLGA and pSi contribute to the control of the release rate of the payload. Protein stability studies show that PLGA/pSi composite can protect BSA from degradation during the long term release. We find that during the degradation of the composite material, the presence of the pSi particles neutralizes the acidic pH due to the PLGA degradation by‐products, thus minimizing the risk of inducing inflammatory responses in the exposed cells while stimulating the mineralization in osteogenic growth media. Confocal studies show that the cellular uptake of the composite microspheres is avoided, while the fluorescent payload is detectable intracellularly after 7 days of co‐incubation. In conclusion, the PLGA/pSi composite microspheres offer an additional level of controlled release and could be ideal candidates as drug delivery vehicles for orthopedic tissue engineering applications.     

Effects of Microbial Transglutaminase on the Wheat Proteins of Bread and Croissant Dough

ABSTRACT: Transglutaminase is a crosslinking enzyme that is finding increasing use in foods, yet the molecular changes responsible for its effects are not fully understood. Proteins were extracted from bread and croissant doughs that had been treated with transglutaminase and compared to those from control doughs by size exclusion high performance liquid chromatography and sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis. Transglutaminase increased the amount of protein extracted in the gliadin fraction in both bread and croissant doughs. In croissant doughs, a corresponding decrease in the protein extracted in the albumin to globulin fraction was seen. In each case, crosslinking of the high molecular weight glutenins was observed. The possible role of each of these changes on the functional properties of baked products is discussed.