High-temperature hydrothermal systems in West Yunnan Province, China

There are more than 660 thermal springs in West Yunnan Province, 30 of which are high-temperature hydrothermal systems with reservoir temperatures above 150°C.All thermal springs in West Yunnan are under the control of the tectonics, most of them being distributed at anticlinoria of metamorphic rocks and granites. This paper discusses the relationship between thermal areas and tectonics, the correlation between thermal springs in West Yunnan and North Thailand, and the geothermal prospects in West Yunnan.     

阶跃信号突变点检测的小波分析法

文章运用小波理论这种新的数学工具,对于由基本平稳的慢变信号和阶跃型突变信号线性组合而构成的这类信号,提出了一种以连续小波变换为主体的检测和分析方法。理论以及实例分析表明,这种方法对于阶跃型突变信号的检侧,是颇为有效的。     

Filtres microondes en microruban suspendu

The authors present the design and the development of integrated microwave filters using suspended substrate microstrip, a technology that provides many advantages. Through quasi-static approximation the propagation structure has been treated using integral equations solved with the method of moments. Thanks to this tool of analysis and to an accurate synthesis method, a series of bandpass filters have been designed and manufactured. The results presented validate the accuracy of our design method.     

WXJB—E型多点温度监测报警仪的研制

本文介绍了 WXJB—E 型多点温度监测报警仪的设计思想、基本原理、技术关键、技术指标及其功能。     

基于TCP/IP的入侵检测评测技术研究

入侵检测系统的评测是入侵检测研究的一个重要方面。论文研究TCP/IP协议下如何利用协议的脆弱性按层次生成评测数据,在此基础上提出了分段混合评测的入侵检测评测方法。该方法的主要思想是数据混合和评测分段。相对以往的评测方法,由于数据混合,它的评测数据更丰富、更接近现实环境,而且可以自由添加;由于评测分段,简化了评测的实现,对正常网络的干扰很小,能够生成一些特定网络中无法生成的攻击。     

工字梁的抗剪极限承载力

对工字梁腹板抗剪极限承载力的研究进行总结,对各种公式与文献中的试验结果进行对比,将拉力场理论和转向应力场理论的假定与ANSYS分析揭示的腹板应力发展变化规律进行对比,指出了假定和数值分析结果的不一致。提出了翼缘对腹板转动约束的合理参数,得到精度良好的考虑翼缘约束的腹板剪切屈曲系数。利用得到的屈曲系数,考虑翼缘抗弯承载力的贡献,提出新的工字梁抗剪极限承载力的计算公式。与现有试验数据和ANSYS非线性有限元分析结果的对比,证实建议方法离散性较小,适用范围广,尤其是对于通用高厚比较大的梁,较以往方法有了较大改进。     

射流泵流场数值模拟的罚有限元法

本文采用罚函数有限元法,在标准k-ε双方程紊流模型下,对射流泵内部轴对称流场进行了数值模拟,得到了较全面的参数分布,特别是全场的压力分布,为射流泵的理论研究和优化设计提供了可靠的依据。给出的算例说明了与文献提供的实验结果基本一致。计算方法简捷,有较大的实用价值。     

“新合纤”的研究开发

介绍了“新合纤”研究开发的历史过程以及“新合纤”的特征及其加工方法，讨论了“新合纤”研究开发的现状及其未来。     

Improving Thermal Stability of BaMgAl10O17:Eu Phosphor

Heterogeneous precipitation method was used to prepared surface coating on self-made BaMgAl10O17:Eu phosphor. Results illustrate that the coating film can be silicon dioxide in amorphous state with 50 nm in thickness. Photoluminescence results indicate that the coating layer presents an observable improved effect on the enhancement of thermal stability. When baked at 600 ℃ for 1 h, the luminance of coated BAM keeps at 92% higher than that of uncoated BAM by 23%. This protective effect can be attributed to the high compact degree and uniformity of this amorphous SiO2 coating film which is served as a diffusion block layer to inbreak oxygen atom, thus releases the oxidation extent of Eu2 effectively.     

Signature analysis and defect detection in layered manufacturing of ceramic sensors and actuators

This paper presents the concept of a process signature for the use of online signature analysis and defect detection in the layered manufacturing (LM) of ceramic sensors and actuators. To achieve the high quality of parts built by the fused deposition of ceramics (FDC), an online process-monitoring system is implemented to detect the processing defects. Using a process signature extracted from the image of a layer captured by the monitoring system, an ideal image is created that is then compared to the original image to detect and identify the defects. Some results of signature analysis and defect detection for single-material and multi-material parts are also presented.Received: 22 July 1999, Accepted: 21 October 2001, Published online: 29 October 2003 Correspondence to: Mohsen A. JafariThis work was supported by the Office of Naval Research under grant # N-0014-96-1-1175. Ref. US Patent # S-5738817, April 14, 1998.