Prediction of the biologically active sites in eclosion hormone from the silkworm, Bombyx mori

The structure-activity relationship of eclosion hormone from the silkworm, Bombyx mori, was analyzed. First, the probable active residues in silkworm eclosion hormone and also tobacco hornworm eclosion hormone were predicted by the average distance map method. To examine the contributions of those residues to the activity of silkworm eclosion hormone, Gly-substituted mutants for those predicted residues were produced by site-directed mutagenesis and their activities were evaluated by a bioassay. Finally, Glu12, Met24 and Phe25 were estimated to be the crucial residues for the eclosion hormone activity. The possibility of the development of a blocker of an eclosion hormone receptor on the basis of the present work is also discussed.      

Potential bile acid metabolites. 24. An efficient synthesis of carboxyl-linked glucosides and their chemical properties

A facile and efficient synthesis of the carboxyl-linked glucosides of bile acids is described. Direct esterification of unprotected bile acids with 2,3,4,6-tetra-O-benzyl-d-glucopyranose in pyridine in the presence of 2-chloro-1,3,5-trinitrobenzene as a coupling agent afforded a mixture of the α- and β-anomers (ca. 1∶3) of the 1-O-acyl-d-glucoside benzyl ethers of bile acids, which was separated effectively on a C₁₈ reversedphase chromatography column (isolated yields of α- and β-anomers are 4–9% and 12–19%, respectively). Subsequent hydrogenolysis of the α- and β-acyl glucoside benzyl ethers on a 10% Pd−C catalyst in acetic acid/methanol/EtOAc (1∶2∶2, by vol) at 35°C under atmospheric pressure gave the corresponding free esters in good yields (79–89%). Chemical specificities such as facile hydrolysis and transesterification of the acyl glucosides in various solvents were also discussed.     

Effect of reaction kinetics of polymer electrolyte on the ion‐conductive behavior for poly(oligo oxyethylene methacrylate)–LiTFSI mixtures

The effect of the reaction kinetics on the ionic conductivity for a comblike‐type polyether (MEO) electrolyte with lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) was characterized by DSC, complex impedance measurements, and ¹H pulse NMR spectroscopy. The ionic conductivity of these electrolytes was affected by the reaction condition of the methacrylate monomer and revealed by the glass transition temperature (T_g), spin–spin relaxation time (T₂), steric effects of the terminal groups, and the number of charge carriers indicated by the VTF kinetic parameter. In this system, the electrolytes prepared by the reaction heating rate of 10°C/min of MEO–H and 15°C/min of MEO–CH₃ showed maximum ionic conductivity, σ_i, two to three times higher in magnitude than that of the σ_i of the others at room temperature. As experimental results, the reaction kinetic rate affected the degree of conversion, the ionic conductivity, and the relaxation behaviors of polyether electrolytes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2149–2156, 2003     

Characteristic properties of cutting fluid additives derived from the adducts of diamines and acid chlorides

A number of N,N′-diacylalkyldiamines were prepared from the reaction of acid chlorides with 1,8-diaminooctane and 1,12-diaminododecane and screened for anti-rust properties and antimicrobial activity in spent coolants of water-based cutting fluids. Aqueous solutions of N,N′-dihexanoyl-1,8-diaminooctane and N,N′-isobutyroyl-1,12-diaminododecane showed good anti-rust properties for water-based cutting fluids. Aqueous emulsions of N,N′-dibutyroyl-, dipentanoyl-, dihexanoyl- and dioctanoyl-1,12-diaminododecane showed good lubricities and antimicrobial activity for water-based cutting fluids.     

Current control of a PWM power amplifier by an approximate 2-degree-of-freedom digital controller

There is a need for robust current control of a pulse width modulation (PWM) power amplifier whose transient response characteristics do not deteriorate with extensive load changes and/or direct-current power supply voltage changes. In this article, we propose a digital robust controller with bumpless mode switching to control the current of a PWM power amplifier to satisfy the demands and extend the range of an inductive load width. It is necessary to measure the value of the load in order to implement this bumpless mode switching automatically depending on the load range. Therefore, a method of estimating the inductive load is shown. The bumpless mode switching is automatically performed by estimating an inductive value without specifying the value of the inductive load beforehand. That is, the value of the inductive load is estimated during the DDC execution, and the control mode is automatically switched bumplessly according to this estimated value. A digital controller equipped with inductance estimation and bumpless mode switching is realized by a DSP. Some experiments show that the digital controller with the proposed bumpless mode switching can satisfy larger specifications.     

Voronoi-based coverage control with anisotropic sensors and experimental case study

In this paper, we investigate coverage control problem for mobile sensor networks. The novelty is to consider an anisotropic sensor model whose performance depends not only on the distance but also on the orientation to a target point. By adapting Lloyd algorithm, a distributed control law is derived. Aside from coverage, we also show that the control law guarantees collision avoidance between the agents. The performance of the control laws is demonstrated through not only numerical simulation but also experiments on a mobile robot test bed.     

A record-linkage study on risk factors for cause-specific infant mortality

Infant death certificates were linked with birth certificates for infants born to residents of Tohoku, Tokai and Kyushu regions in 1989 (n = 409, 679, or about one-third of all births in Japan), to examine the effects of variables, as reported on birth certificates, on cause-specific infant mortality. "Certain conditions originating in the perinatal period" and "congenital anomalies" accounted for nearly 90 percent of neonatal deaths, while "congenital anomalies", "injuries and poisoning" and "sudden infant death" were responsible for about 65 percent of postneonatal deaths. Mortality rates for almost all causes of infant deaths, except injuries and poisonings, increased as birth weight decreased not only in the neonatal period but also in the postneonatal period. This suggests that low birth weight places some infants at higher risk of death, and conditions that lead to low birth weight independently contribute to the risk of infant death. Cox's proportional hazards linear model was used to assess the effects of variables on infant mortalities by causes of death. An extremely strong birth weight effect was noted for "certain conditions originating in the perinatal period" and "congenital anomalies". Being a male infant and late order of birth in multiparity were other risk factors for deaths from "congenital anomalies", while being a male infant, resident of Tohoku region and maternal stillbirth experience related to deaths from "certain conditions originating in the perinatal period". Elevated risks of sudden infant death syndrome (SIDS), of which mortality rate in Japan was considerably lower than those in most developed Western countries, i.e. 0.23 per 1,000 live births in 1989, were associated with low birth weight, being a male infant, low maternal age, late order of birth in multiparity and illegitimacy. Low maternal age, late order of birth in multiparity and illegitimacy, also, related significantly to increased risk of infant deaths for "injuries and poisoning". These results suggest the independent contributions of socioeconomic factors to infant mortality, especially postneonatal mortality, from SIDS, "injuries and poisonings".     

Carbonization and graphitization of poly-p-phenylene sulphide (PPS) film

Oriented poly-p-phenylene sulphide (PPS) films (thickness 12 and 75 m) and PPS powder were carbonized/graphitized after stabilizing by oxidation, in order to examine the effect of sulphur on graphitizability of the resulting carbons. The films and the powder resulted in carbons with a high and a low graphitizability respectively. An in-plane oriented structure of the PPS film was the most predominant factor to lead to a high graphitizability, and sulphur in the precursor did not lower the graphitizability when it was subjected to solid-phase carbonization. These phenomena are discussed on the basis of analytical data.     

Structural instabilities and superconductivity in La-214 compounds

In La_2–x Ba _x CuO₄ (LBCO) the transition to a low-temperature tetragonal phase and the suppression of superconductivity occur at the carrier concentration p 1/8 per copper. We will discuss the roles of various material parameters that control this instability. An unusual lattice softening has been found by ultrasonic measurement on La_2–x Sr _x CuO₄ (LSCO). This softening is present only in an in-plane shearing mode and is ascribed to the growth of structural fluctuations in the normal state.These phenomena are closely related because both the structural change in LBCO and the applied strain in LSCO lift the degeneracy of in-plane oxygen sites. They clarify the importance of strong coupling between the normal-state electronic system and the lattice by a Peierls-type mechanism.