Investigation into the evolution of corrosion product layer (CPL) of 1018 C-steel exposed to multiphase environment using FIB and EIS techniques

This communication reports into the effects of flow, fluid composition and the effectiveness of imidazoline inhibitors on the evolution and distribution of corrosion products on 1018 C-steel exposed to CO₂ corrosion. Focused ion beam technique was used to measure the thickness of the corrosion product layer (CPL), in contrast to the conventional techniques used to observe the cross-section of specimens. Morphological analysis using scanning electron microscopy revealed topographical variations on the surface with the change in the multiphase environment. The CPL was found to be more porous in nature with the presence of oil in the multiphase environment. Electrochemical impedance spectroscopy was also used in the present study to measure the corrosion rates and was subsequently correlated to the CPL evolution for 1018 C-steel in multiphase environment.     

Crack initiation in relation to the tool edge radius and cutting conditions in nanoscale cutting of silicon

In cutting of brittle materials, experimentally it was observed that there is a ductile–brittle transition when the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius of the zero rake angle. However, how the crack is initiated in the ductile–brittle mode transition as the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius has not been fully understood. In this study, the crack initiation in the ductile–brittle mode transition as the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius has been simulated using the Molecular Dynamics (MD) method on nanoscale cutting of monocrystalline silicon with a non-zero edge radius tool, from which, for the first time, a peak deformation zone in the chip formation zone has been found in the transition from ductile mode to brittle mode cutting. The results show that as the undeformed chip thickness is larger than the cutting edge radius, in the chip formation zone there is a peak deformation depth in association with the connecting point of tool edge arc and the rake face, and there is a crack initiation zone in the undeformed workpiece next to the peak deformation zone, in which the material is tensile stressed and the tensile stress is perpendicular to the direction from the connecting point to the peak. As the undeformed chip thickness is smaller than the cutting edge radius, there is no deformation peak in the chip formation zone, and thus there is no crack initiation zone formed in the undeformed workpiece. This finding explains well the ductile–brittle transition as the undeformed chip thickness increases from smaller to larger than the tool cutting edge radius.     

A new approach to water quality modelling and environmental decision support systems

The concepts and technology of environmental decision support systems (EDSS) have developed considerably over recent decades, although core concepts such as flexibility and adaptability within a changing decision environment remain paramount. Much recent EDSS theory has focussed on model integration and re-use in decision support system (DSS) tools and for design and construction of ‘DSS generators’. Many current specific DSS have architectures, tools, models and operational characteristics that are either fixed or difficult to change in the face of changing management needs. This paper reports on development and deployment of an EDSS that encompasses a new approach to DSS tools, generators and specific DSS applications. The system, named E2, is built upon a conceptualisation of terrestrial and aquatic environmental systems that has resulted in a robust and flexible system architecture. The architecture provides a set of base classes to represent fundamental concepts, and which can be instantiated and combined to form DSS generators of varying complexity. A DSS generator is described within which system users are able to select and link models, data, analysis tools and reporting tools to create specific DSS for particular problems, and for which new models and tools can be created and, through software reflection (introspection), discovered to provide expanded capability where required. This system offers a new approach within which environmental systems can be described in the form of specific DSS at a scale and level of complexity suited to the problems and needs of decision makers.     

Thermal-stress-induced birefringence in bow-tie optical fibers

Birefringence induced by thermal stress in bow-tie optical fibers is studied in detail by the use of the finite-element method. Results of computer modeling show that a higher degree of birefringence can be obtained with the use of a larger cladding and larger stress-applying zones in the fiber.     

ESPAR array design for the UHF RFID wireless sensor communication system

In this paper, in order to improve the received signal strength (RSS) and signal quality, three arrays of electronically steerable parasitic array radiator (ESPAR) antennas are suggested for the ultra-high frequency (UHF) radio frequency identification (RFID) communication and sensing system applications. Instead of the single antenna, the array antennas have recently been widely used in many communication systems because of their peak gains, better radiation patterns, and higher radiation efficiency. Also, there are some important issues to use the antenna array like high data rates in wireless communication systems and to better understand the many targets or sensors. In this article, a wireless sensor network (WSN) is being investigated to overcome multipath fading and interference by antenna nulling technology that can be achieved through beam control ESPAR array antennas. The proposed ESPAR array antennas exhibit higher gains like 9.63, 10.2, and 12 dBi and proper radiation patterns from one array to another. Moreover, we investigate the mutual coupling effect on the performance of array antennas with different spacing (0.5λ, 0.75λ, λ) and configurations. It is found that the worst mutual coupling reduced by −28 to −34 dB for 2 × 2 array, −3 to −43 dB for 2 × 3 array, and finally −42 dB to −51 dB due to the antenna spacing from 0.5λ to λ. Thus, these suggested antennas could effectively be applied in the WSN communication systems, internet of things (IoT) networks, and massive wireless and backscatter communication systems.     

Quantum Inspired Broadband Photonic Absorber: Potential Application as Solar Sail along with Mobility Analysis

Electromagnetic wideband absorption is still perceived as a critical and formidable challenge to address with an unambiguous photonic absorber. Subwavelength metamaterial (MM) unit cells with unique and controlled features have recently gained considerable interest. However, meta-atoms, generated using a quantum-inspired pattern distribution, are underwhelming in existing literature to design photonic absorbers and their potential application to manufacture solar sails is still quite uncommon. In this article, to create a flexible, polarization-insensitive, ultrathin, and broadband MM absorber, quantum interference pattern-inspired design is utilized. Herein, a novel approach to fabricating solar sails for the space exploration incorporates the proposed broadband photonic absorber rather than conventional reflectors. The quantum-inspired meta-absorber (QIMA) exhibits an absorption of over 91% for the visible domain, i.e., 380–800 nm under a conventional plane-polarized source. It is shown in the study that broadband absorbers are almost equivalent to excellent reflectors to design the solar sails in terms of the time-averaged force calculated by utilizing the Maxwell stress tensor method. Thus, the QIMA has the potential to be a viable alternative to reflectors in the design of futuristic solar sails for space exploration. The interference theory model is also utilized to assure the dependability of calculated data, and additionally, the standard AM1.5 solar spectrum is utilized to demonstrate the QIMA's solar-harvesting potentiality.     

An Improved Hybrid Indoor Positioning Algorithm via QPSO and MLP Signal Weighting

Accurate location or positioning of people and self-driven devices in large indoor environments has become an important necessity The application of increasingly automated self-operating moving transportation units, in large indoor spaces demands a precise knowledge of their positions. Technologies like WiFi and Bluetooth, despite their low-cost and availability, are sensitive to signal noise and fading effects. For these reasons, a hybrid approach, which uses two different signal sources, has proven to be more resilient and accurate for the positioning determination in indoor environments. Hence, this paper proposes an improved hybrid technique to implement a fingerprinting based indoor positioning, using Received Signal Strength information from available Wireless Local Area Network access points, together with the Wireless Sensor Networks technology. Six signals were recorded on a regular grid of anchor points, covering the research space. An optimization was performed by relative signal weighting, to minimize the average positioning error over the research space. The optimization process was conducted using a standard Quantum Particle Swarm Optimization, while the position error estimate for all given sets of weighted signals was performed using a Multilayer Perceptron (MLP) neural network. Compared to our previous research works, the MLP architecture was improved to three hidden layers and its learning parameters were finely tuned. These experimental results led to the 20% reduction of the positioning error when a suitable set of signal weights was calculated in the optimization process. Our final achieved value of 0.725 m of the location incertitude shows a sensible improvement compared to our previous results.     

Intelligently tuned wavelet parameters for GPS/INS error estimation

This paper presents a new algorithm for de-noising global positioning system (GPS) and inertial navigation system (INS) data and estimates the INS error using wavelet multi-resolution analysis algorithm (WMRA)-based genetic algorithm (GA) with a well-designed structure appropriate for practical and real time implementations because of its very short training time and elevated accuracy. Different techniques have been implemented to de-noise and estimate the INS and GPS errors. Wavelet de-noising is one of th...     

Estimation of the minimum machining performance in the abrasive waterjet machining using integrated ANN-SA

In this study, Artificial Neural Network (ANN) and Simulated Annealing (SA) techniques were integrated labeled as integrated ANN-SA to estimate optimal process parameters in abrasive waterjet (AWJ) machining operation. The considered process parameters include traverse speed, waterjet pressure, standoff distance, abrasive grit size and abrasive flow rate. The quality of the cutting of machined-material is assessed by looking to the roughness average value (R_a). The optimal values of the process parameters are targeted for giving a minimum value of R_a. It was evidence that integrated ANN-SA is capable of giving much lower value of R_a at the recommended optimal process parameters compared to the result of experimental and ANN single-based modeling. The number of iterations for the optimal solutions is also decreased compared to the result of SA single-based optimization.     

Replica Placement Strategies in Data Grid

Replication is a technique used in Data Grid environments that helps to reduce access latency and network bandwidth utilization. Replication also increases data availability thereby enhancing system reliability. The research addresses the problem of replication in Data Grid environment by investigating a set of highly decentralized dynamic replica placement algorithms. Replica placement algorithms are based on heuristics that consider both network latency and user requests to select the best candidate sites to place replicas. Due to dynamic nature of Grid, the candidate site holds replicas currently may not be the best sites to fetch replicas in subsequent periods. Therefore, a replica maintenance algorithm is proposed to relocate replicas to different sites if the performance metric degrades significantly. The study of our replica placement algorithms is carried out using a model of the EU Data Grid Testbed 1 [Bell et al. Comput. Appl., 17(4), 2003] sites and their associated network geometry. We validate our replica placement algorithms with total file transfer times, the number of local file accesses, and the number of remote file accesses.