Fatty acid profile and proximate composition of Pacific mullet (Mugil so‐iuy) caught in the Black Sea

This study demonstrates proximate composition and fatty acid profile of Pacific mullet caught in Turkey. The highest moisture and protein contents were observed with muscle tissues as 83.74 and 10.52%, while the highest fat and ash contents were attributed to female gonads as 11.80 and 0.94%, respectively, with a significant variation amongst months (P < 0.05). Significant variation (P < 0.05) usually occurred amongst months within the same sex for total saturated fatty acids ( ∑ SFA), monosaturated fatty acids ( ∑ MUFA), polyunsaturated fatty acids ( ∑ PUFA), eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) in muscle, although overall mean values between sexes were not found significant. Except for EPA, no variation observed for gonads while significant changes occurred (P < 0.05) with liver samples amongst months. Overall total values of ∑ SFA, ∑ MUFA, ∑ PUFA, DHA and EPA in muscle samples were 29.59, 29.26, 18.06 and 4.48%, respectively, while in gonads ranged as 30.26–33.23%, 35.17–37.47%, 11.87–14.88%, 4.38–5.34% and 3.02–5.02%. These FAs were 21.57–33.11%, 32.89–50.96%, 14.78–20.08%, 0.89–9.94% and 5.85–9.54% for liver, respectively. The results of this study showed that muscle and gonads of Pacific mullet were rich in n‐3 PUFA, especially, EPA, DHA, increasing the value of this species for human consumption.     

Drum-mate: interaction dynamics and gestures in human–humanoid drumming experiments

This article investigates the role of interaction kinesics in human–robot interaction (HRI). We adopted a bottom-up, synthetic approach towards interactive competencies in robots using simple, minimal computational models underlying the robot's interaction dynamics. We present two empirical, exploratory studies investigating a drumming experience with a humanoid robot (KASPAR) and a human. In the first experiment, the turn-taking behaviour of the humanoid is deterministic and the non-verbal gestures of the robot accompany its drumming to assess the impact of non-verbal gestures on the interaction. The second experiment studies a computational framework that facilitates emergent turn-taking dynamics, whereby the particular dynamics of turn-taking emerge from the social interaction between the human and the humanoid. The results from the HRI experiments are presented and analysed qualitatively (in terms of the participants’ subjective experiences) and quantitatively (concerning the drumming performance of the human–robot pair). The results point out a trade-off between the subjective evaluation of the drumming experience from the perspective of the participants and the objective evaluation of the drumming performance. A certain number of gestures was preferred as a motivational factor in the interaction. The participants preferred the models underlying the robot's turn-taking which enable the robot and human to interact more and provide turn-taking closer to ‘natural’ human–human conversations, despite differences in objective measures of drumming behaviour. The results are consistent with the temporal behaviour matching hypothesis previously proposed in the literature which concerns the effect that the participants adapt their own interaction dynamics to the robot's.     

Recycling studies of marble processing waste: Composites based on commercial epoxy resin

Marble waste was obtained from marble processing plant wastewater with precipitation using different coagulants, such as sepiolite, zeolite, and pumice in dosages of 0.5–8 g/500 mL and mixed in 20 wt % with commercial epoxy resin. The effects of marble, coagulant type and dosage on the physicomechanical and thermal properties were investigated. The incorporation of marble processing waste particles increases the 10% decomposition temperature of pure epoxy by 5–50°C. Surface hardness, tensile strength, percentage elongation, and stress at maximum load of the composites were higher than those of pure resin, too. The composites reinforced with marble processing waste-pumice showed about 10% increase in elastic modulus, whereas the composite reinforced with marble processing waste-sepiolite or zeolite showed about 76.67–143.33% increase in elastic modulus over the pure epoxy matrix. Scanning electron microscopy (SEM) was used for characterization of surface and cross sections of the composites to verify the results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of polyacrylamide hydrogels at various charge densities by postmodification

In this study, first polyacrylamide hydrogels were synthesized by free‐radical crosslinking polymerization of acrylamide monomer with N,N′‐methylenebis(acrylamide) as a crosslinker in an aqueous solution at 22°C. Then, a series of hydrogels at various charge densities were prepared by partial hydrolysis of polyacrylamide precursors in a 0.1M sodium hydroxide solution at 60°C. The hydrolysis time was varied between 20 and 180 min. The chemical structures and internal morphologies of the hydrogels before and after alkaline hydrolysis were characterized with attenuated total reflectance/Fourier transform infrared and scanning electron microscopy measurements. The swelling ratio of the hydrolyzed hydrogels was measured in buffer solutions at various pHs. From differential curves of dQ_v/dpH versus pH (where Q_v is the equilibrium swelling ratio of the hydrogels), the volume phase transition pH of the hydrogels was found to be 4.33 ± 0.05, regardless of the charge density of the hydrogels. In water at 22°C, the hydrogels with greater charge density showed a more rapid swelling rate because of their higher porosity and hydrophilicity. Moreover, in buffer solutions with the pH changing from 9.0 to 2.0 at 22°C, the hydrogels with greater charge density also exhibited a more rapid deswelling rate than the hydrogels with less charge density. In conclusion, the postmodification method is a good way of preparing pH‐sensitive hydrogels with fast responsiveness. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Improvement of anthocyanin content in the cv. Öküzgözü wines by using pectolytic enzymes

The effect of the addition of two commercial pectolytic enzymes on the anthocyanin and chemical composition of Öküzgözü wines was studied. A rapid HPLC-diode array detection (DAD) method was developed for the analysis of anthocyanins in wines. Direct injection of filtered wine samples followed by selective detection at 520 nm allowed quantitation of these compounds in red wines. Thirteen anthocyanin compounds were detected in wines and, addition of the two enzyme preparations improved the extraction of anthocyanins. Moreover, the wines treated with enzymes had higher values in total phenolics, tannins, and colour intensity than the control wines.     

Linearity of bulk-controlled inverter ring VCO in weak and strong inversion

In this paper linearity of frequency modulation in voltage controlled inverter ring oscillators for non feedback sigma delta converter applications is studied. The linearity is studied through theoretical models of the oscillator operating at supply voltages above and below the threshold voltage of a transistor, bringing the transistors in respectively strong and weak inversion. The theoretical results are tested with more advanced models through spectreRF simulations. A soft rail approach implemented to improve linearity in weak inversion is proposed and demonstrated. The influence from voltage noise, process variations and temperature variations have also been simulated to indicate the advantages of having the soft rail bias transistor in the VCO.     

CCS: A future CO2 mitigation option for Germany?—A bottom-up approach

The role that carbon capture and storage (CCS) technologies could play within the framework of an overall CO₂ mitigation strategy is examined in the form of scenarios up to 2030 with the example of Germany. As the calculations show, the use of CCS can represent an interesting mitigation option in view of stringent CO₂ reduction goals. The scenarios, performed with the aid of the IKARUS optimization model, however, also show that according to cost-efficiency criteria a large number of measures would have to be taken covering all energy sectors. CCS can at best represent one element in an overall strategy. The model results show that a mitigation goal for 2030 corresponding to a 35% reduction of CO₂ as compared to 1990 is necessary to trigger a significant contribution of CCS. As an alternative to a CO₂ restriction, we also calculated reduction scenarios based on CO₂ penalties. These scenarios showed that a penalty price of approximately 30 €/tCO₂ is necessary before CCS can be included in the model.     

Removal of Cu2+ and Pb2+ ions from aqueous solutions by starch-graft-acrylic acid/montmorillonite superabsorbent nanocomposite hydrogels

In this study, the removal of copper(II) and lead(II) ions from aqueous solutions by Starch-graft-acrylic acid/montmorillonite (S-g-AA/MMT) nanocomposite hydrogels was investigated. For this purpose, various factors affecting the removal of heavy metal ions, such as treatment time with the solution, initial pH of the solution, initial metal ion concentration, and MMT content were investigated. The metal ion removal capacities of copolymers increased with increasing pH, and pH 4 was found to be the optimal pH value for maximum metal removal capacity. Adsorption data of the nanocomposite hydrogels were modeled by the pseudo-second-order kinetic equation in order to investigate heavy metal ions adsorption mechanism. The observed affinity order in competitive removal of heavy metals was found Cu²⁺ > Pb²⁺. The Freundlich equations were used to fit the equilibrium isotherms. The Freundlich adsorption law was applicable to be adsorption of metal ions onto nanocomposite hydrogel.