Binary and ternary blends of poly(vinyl chloride), hytrel,and a polyurethane

Binary blends of poly(vinyl chloride) and a poly(ether urethane) containing 20 and 40 weight percent, respectively, of poly(vinyl chloride) have been prepared by solution blending from tetrahydrofuran and their degree of mixing investigated using dynamic mechanical analysis. In the polyurethane, transitions were found at ?19°C and ?119°C. The former was attributed to the glass transition and the latter to a Schatzki type of motion of the polyether sequences. This latter transition occurred at a temperature which is higher than the literature value for the low temperature transition in poly(tetrahydrofuran), which is equivalent to the polyether sequence in the polyurethane. This discrepancy is attributed to the influence of neighboring hard segments present because of incomplete segmental phase separation of the polyurethane. For the blends only one very broad transition was observed, indicating that there was substantial mixing of these two polymers. Three ternary blends were prepared, also by solution blending, containing poly(vinyl chloride), Hytrel, and the polyurethane in the ratios 1:1:1, 1:2:1, and 2:1:1, respectively. In the first two blends there was clear evidence of phase separation. It was only in the 2:1:1 blend that an apparently significantly compatible material resulted.     

Implications of variable fluid resistance caused by start-up flow in microfluidic networks

Electrical circuit analogies are often used to design microfluidic systems because they simplify device design, providing simple relationships between fluid flow rate, driving forces, and channel dimensions. However, such approximations often significantly overestimate flow rates in situations where start-up energy losses from establishing kinetic head are similar in magnitude to the energy required to overcome viscous shear stresses, as is often the case within complex microfluidic networks. These reduced flows can be more accurately predicted within an electrical analogy framework that accounts for the nonlinear flow resistance generated on the transient regime of start-up flow. In this work, standard flow resistance expressions are modified to account for such effects, and the onset of nonlinear resistance is predicted by a dimensionless parameter, $\xi = Re\frac{D}{L},$ which is dependent on the Reynolds number and the channel length. As a demonstration, variable fluid resistance is shown to dramatically affect the flow performance of common microfluidic units such as T-junctions and serpentine channels, and the change in performance is accurately predicted. Experimental and theoretical analysis of T-junctions further shows that variable flow resistance causes the ratio of flows through the junction to converge toward unity with respect to an increasing total flow rate. In addition, serpentine channels are shown to exaggerate these start-up effects, owing to compounded energetic demand associated with changing a flow’s direction. As a result, serpentine channels cause the ratio of flow rates exiting a T-junction to diverge from unity with respect to an increasing flow rate.     

An optimality criteria based method for discrete design optimization taking into account buildability constraints

This paper presents a heuristic design optimization method specifically developed for practicing structural engineers. Practical design optimization problems are often governed by buildability constraints. The majority of optimization methods that have recently been proposed for design optimization under buildability constraints are based on evolutionary computing. While these methods are generally easy to implement, they require a large number of function evaluations (finite element analyses), and they involve algorithmic parameters that require careful tuning. As a consequence, both the computation time and the engineering time are high. The discrete design optimization algorithm presented in this paper is based on the optimality criteria method for continuous optimization. It is faster than an evolutionary algorithm and it is free of tuning parameters. The algorithm is successfully applied to two classical benchmark problems (the design of a ten-bar truss and an eight-story frame) and to a practical truss design optimization problem.     

The estimation of the residual capacity of sealed lead-acid cells using the impedance technique

The problem of estimating the residual usable energy of a lead-acid cell has been intensified by the introduction of fully sealed units. These rely on the recombination of gaseous oxygen produced during overcharge at the positive electrode with the active material at the negative electrode. This introduction has removed the possibility of electrolyte density measurements, third electrode measurements and restricted residual capacity assessments to the two cell terminals. A method for this process is described using a parameter based on a characteristic frequency. The parameter is also a useful measure of cell ageing.Nomenclature R _SOL Ohmic resistance of cell () - Charge-transfer resistance of positive and negative electrodes () - CL Double-layer capacitance of both positive and negative electrodes (F) - Warburg diffusion (S^–1/2) - C _EXT External series capacitor in analogue Fig. 5 (F) - R _EXT External resistor in parallel withC _EXT in the anologue circuit Fig. 5 () - IND Inductor in Fig. 5 representing the geometrical effects of the cell at high frequencies (Henries) - R _IND External resistor in parallel with IND in the analogue circuit Fig. 5 () - Roughness factor allowing for the porosity of both electrodes     

Segregation in Single-Crystal Fully Stabilized Yttria-Zirconia

X-ray photoelectron spectroscopy (XPS) has been used to study surface segregation in 9.5 mol% single-crystal Y₂O₃-ZrO₂ which has been subjected to air anneals at temperatures ranging from 900° to 1500°C. The kinetics of segregation reveal an enrichment of Y, Si, Na, and Fe at short times; however, at longer times surface equilibrium is reached. The heats of segregation for Y, Si, Na and Fe, determined from Arrhenius plots, were 9.3 ± 3.0, 59.0 ± 7.0, –23.5 ± 11.5, –18.0 ± 6.0 kJ/mol, respectively. XPS analysis of the equilibrium states at all temperatures revealed a distinct surface layer which, given the positive heats of segregation for Si and Y, is quite stable.     

A Sequential Design Approach for Switching ℌ∞ LPV Control

This paper proposes a sequential design scheme for switching ℌ_∞ LPV (Linear Parameter-Varying) control, aiming to reduce the computational complexity of the associated optimization problem. Different from the traditional approach that simultaneously designs switching LPV controllers and solves a high-dimensional optimization problem, the proposed sequential design approach renders a bundle of low-dimensional optimization problems to be solved iteratively. Individual ℌ_∞ LPV controller for each subregion is synthesized by independent PLMIs (Parametric Linear Matrix Inequalities) to guarantee ℌ_∞ performance, and controller variables are interpolated on the overlapped subregions such that the ℌ_∞ performance is also guaranteed on the overlapped subregion. Numerical examples are used to demonstrate the effectiveness of this method to reduce the computational load in each design iteration and improved ℌ_∞ performance over the conventional simultaneous design method with well-tuned interpolation coefficient.

     

Influence of a high‐head dam as a dispersal barrier to fish community structure of the Upper Mississippi River

In river systems, high‐head dams may increase the distance‐decay of fish community similarity by creating nearly impermeable dispersal barriers to certain species from upstream reaches. Substantial evidence suggests that migratory species are impacted by dams, and most previous studies in stream/river networks have focused on small streams and headwaters. Here, we assess whether a high‐head dam (Lock and Dam 19; LD 19) on a large river, the Upper Mississippi River (UMR), substantially alters fish community structure relative to variability expected to occur independent of the dam's effect as a fish dispersal barrier. Using fish catch per unit effort data, we modelled the distance‐decay function for the UMR fish community and then estimated the similarity that would be expected to occur across LD19 and compared it with measured similarity. Measured similarity in the fish community above and below LD19 was close to the expected value based on the distance‐decay function, suggesting LD19 does not create an abrupt transition in the fish community. Although some migratory fish species no longer occur above LD19 (e.g., skipjack herring, Alosa chrysochloris), these species do not occur in high abundance below the dam and so do not drive variation in fish community structure. Instead, much of the variation in species structure is driven by the loss/gain of species across the latitudinal gradient. Lock and Dam 19 does not appear to be a clear transition point in the river's fish community, although it may function as a meaningful barrier for particular species (e.g., invasive species) and warrant future attention from a management perspective.     

Antioxidant Activity of Osage Orange Extract in Soybean Oil and Fish Oil during Storage

The food industry is seeking natural antioxidants for edible oils that have comparable activity to synthetic counterparts. In this study, Osage orange extract (OOE) rich in osajin (42.9%) and pomiferin (30.0%) was obtained after hexane extraction of the fruit, and its antioxidant activity was examined in stripped soybean oil (SBO) and fish oil (FO), in which antioxidants and polar compounds were removed. The antioxidant activity of OOE was compared with commercial natural antioxidants (i.e., rosemary extract and mixed tocopherols) and a synthetic antioxidant, butylated hydroxytoluene (BHT), during storage at 25 and 40 °C. The 0.1% OOE had stronger antioxidant activity than 0.1% rosemary extract and 0.1% mixed tocopherols in both oils at 25 and 40 °C. Its activity was similar to 0.02% BHT in SBO and was similar or slightly stronger than 0.02% BHT in FO. When OOE was studied at 0.05, 0.1, and 0.2%, there was a weak dose–response in SBO but a stronger dose–response in FO. Headspace volatile analysis using solid phase micro-extraction (SPME) combined with GC–MS indicated that 0.1% OOE was very effective in preventing the formation of volatile oxidation products in both oils. Although it should be further tested for safety before the actual use, this study shows that OOE can be developed as an antioxidant for edible oils.     

Runout effects in milling: Surface finish, surface location error, and stability

This paper investigates the effect of milling cutter teeth runout on surface topography, surface location error, and stability in end milling. Runout remains an important issue in machining because commercially-available cutter bodies often exhibit significant variation in the teeth/insert radial locations; therefore, the chip load on the individual cutting teeth varies periodically. This varying chip load influences the machining process and can lead to premature failure of the cutting edges. The effect of runout on cutting force and surface finish for proportional and non-proportional tooth spacing is isolated here by completing experiments on a precision milling machine with 0.1 μm positioning repeatability and 0.02 μm spindle error motion. Experimental tests are completed with different amounts of radial runout and the results are compared with a comprehensive time-domain simulation. After verification, the simulation is used to explore the relationships between runout, surface finish, stability, and surface location error. A new instability that occurs when harmonics of the runout frequency coincide with the dominant system natural frequency is identified.     

Evaluation of the coupled multielectrode array sensor as a real-time corrosion monitor

Coupled multielectrode array sensors made of carbon steel and stainless steels were evaluated and compared with electrochemical noise (EN) sensors. Good correlations between sensor signals and solution corrosivity were observed for all multielectrode array sensors. Some correlation between the average pit index and solution corrosivity was observed for the carbon steel EN sensors, but not for the stainless steel EN sensors. The time-average noise resistances from the stainless steel EN sensors correlate well with solution corrosivity. There were, however, large random fluctuations and drifting for all EN signals, which make the EN sensors unreliable as real-time monitors.