Parallel Assignments in Software Model Checking

In this paper we investigate how formal software verification systems can be improved by utilising parallel assignment in weakest precondition computations.We begin with an introduction to modern software verification systems. Specifically, we review the method in which software abstractions are built using counterexample-guided abstraction refinement (CEGAR). The classical NP-complete parallel assignment problem is first posed, and then an additional restriction is added to create a special case in which the problem is tractable with an O(n²) algorithm. The parallel assignment problem is then discussed in the context of weakest precondition computations. In this special situation where statements can be assumed to execute truly concurrently, we show that any sequence of simple assignment statements without function calls can be transformed into an equivalent parallel assignment block.Results of compressing assignment statements into a parallel form with this algorithm are presented for a wide variety of software applications. The proposed algorithms were implemented in the ComFoRT reasoning framework [J. Ivers and N. Sharygina. Overview of ComFoRT: A model checking reasoning framework. Technical Report CMU/SEI-2004-TN-018, Carnegie Mellon Software Engineering Institute, 2004] and used to measure the improvement in the verification of real software systems. This improvement in time proved to be significant for many classes of software.     

Catalytic dehydrogenation of cyclohexane over Ag-M/ACC catalysts for hydrogen supply

Dehydrogenation of cyclohexane to benzene has been carried out over Ag supported on activated carbon cloth (Ag/ACC) catalysts using a spray- pulse reactor. Hydrogen evolution was studied for hydrogen storage and supply system applications. The maximum rate of hydrogen evolution rate using monometallic Ag/ACC catalysts was 6.9 mmol/g_met/min for Ag loading of 10 wt%. An enhanced hydrogen evolution was observed by adding a small amount of noble metal (1 wt% Pt, Pd, Rh) to the Ag based catalysts. A synergistic effect was observed in the case of the Pt promoted catalysts on the hydrogen production were twice as compared to 10 wt% Ag catalyst only.     

Two-Dimensional Silicene–Stanene Heterostructures by Epitaxy

The synthesis of new Xenes and their potential applications prototypes have achieved significant milestones so far. However, to date the realization of Xene heterostructures in analogy with the well known van der Waals heterostructures remains an unresolved issue. Here, a Xene heterostructure concept based on the epitaxial combination of silicene and stanene on Ag(111) is introduced, and how one Xene layer enables another Xene layer of a different nature to grow on top is demonstrated. Single-phase (4 × 4) silicene is synthesized using stanene as a template, and stanene is grown on top of silicene on the other way around. In both heterostructures, in situ and ex situ probes confirm layer-by-layer growth without intercalations and intermixing. Modeling via density functional theory shows that the atomic layers in the heterostructures are strongly interacting, and hexagonal symmetry conservation in each individual layer is sequence selective. The results provide a substantial step toward currently missing Xene heterostructures and may inspire new paths for atomic-scale materials engineering.     

Strain mediated enhancement in magnetoelectric properties of sonochemically synthesized piezoelectric and piezomagnetic composites

Materials with magneto-electric (ME) properties are of great importance because of their demand in electronic industries. Three dimensional nano-particles of the ME-composites having the general formula (1-x)CoCr_0.3Fe_1.7O₄(CCFO)+(x)BaTiO₃(BTO) (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) were obtained by comprising the piezoelectric-BTO and piezomagnetic-CCFO phases. The individual phases of CCFO and BTO were synthesized separately by ultrasonic irradiation assisted sonochemical and sol-gel routs. X-ray diffraction patterns (XRD) confirmed the well-crystalline nature of both the phases. BTO and CCFO phases were under tensile strain as confirmed by the variation in lattice constants with varying proportion of BTO and CCFO. An energy-dispersive X-ray spectroscopy spectrum confirmed the phase purity of the samples and stoichiometric concentration of elements. Magnetic properties were investigated by M ? H loop measurements and dielectric properties by using RF impedance analyzer. Dielectric constant increased with the increasing percentage of BTO. The maximum value of ME coefficient (24.7 mV/cm?Oe) is observed for the 60%CCFO+40%BTO sample. The obtained results were discussed in the light of grain size, strain and the basic properties of the individual phases. The prepared materials can be applicable in electronic devices where high magneto-electric coefficient is desirable.     

DC and analog/RF performance optimisation of source pocket dual work function TFET

We investigate a systematic study of source pocket tunnel field-effect transistor (SP TFET) with dual work function of single gate material by using uniform and Gaussian doping profile in the drain region for ultra-low power high frequency high speed applications. For this, a n⁺ doped region is created near the source/channel junction to decrease the depletion width results in improvement of ON-state current. However, the dual work function of the double gate is used for enhancement of the device performance in terms of DC and analog/RF parameters. Further, to improve the high frequency performance of the device, Gaussian doping profile is considered in the drain region with different characteristic lengths which decreases the gate to drain capacitance and leads to drastic improvement in analog/RF figures of merit. Furthermore, the optimisation is performed with different concentrations for uniform and Gaussian drain doping profile and for various sectional length of lower work function of the gate electrode. Finally, the effect of temperature variation on the device performance is demonstrated.     

Automated Compositional Abstraction Refinement for Concurrent C Programs: A Two-Level Approach

The state space explosion problem in model checking remains the chief obstacle to the practical verification of real-world distributed systems. We attempt to address this problem in the context of verifying concurrent (message-passing) C programs against safety specifications. More specifically, we present a fully automated compositional framework which combines two orthogonal abstraction techniques (operating respectively on data and events) within a counterexample-guided abstraction refinement (CEGAR) scheme. In this way, our algorithm incrementally increases the granularity of the abstractions until the specification is either established or refuted. Our explicit use of compositionality delays the onset of state space explosion for as long as possible. To our knowledge, this is the first compositional use of CEGAR in the context of model checking concurrent C programs. We describe our approach in detail, and report on some very encouraging preliminary experimental results obtained with our tool MAGIC.     

Supercritical carbon dioxide–assisted synthesis of stimuli-responsive magnetic poly(N-isopropylacrylamide)–ferrite biocompatible nanocomposites for targeted and controlled drug delivery

Supercritical carbon dioxide–assisted synthesis of poly(N-isopropylacrylamide)–ferrite nanocomposites was carried out by polymerization reaction of N-isopropyl acrylamide monomer in the presence of ferrite nanoparticles. They were characterized by Fourier transform infrared, X-ray diffraction, transmission electron microscopy, atomic force microscopy, and vibrating sample magnetometry analysis. Drug loading and release profiles were studied. Nanomaterials showed pH-dependent drug release profile. Polymer nanocomposites in comparison to ferrite nanoparticles showed impressive drug release activity, with a release percent of 20.98–76.54%, and greater biocompatibility in breast cancer cells, with a cell viability of 81–93%. This pH-dependent drug release activity and magnetic property of polymer nanocomposites can be used for controlled and targeted drug delivery.     

Dextrin crosslinked with poly(lactic acid): A novel hydrogel for controlled drug release application

A new class of biodegradable crosslinked hydrogel, consisting of hydrophobic polylactic acid (PLA) and hydrophilic dextrin in presence of crosslinker N,N‐methylene bisacrylamide (MBA) has been synthesized by free‐radical polymerization technique using potassium persulfate (KPS) as initiator. By variation of crosslinker concentration, a series of hydrogels have been prepared and the optimized grade has been selected on the basis of higher crosslinking efficiency as well as lower equilibrium swelling characteristics, XRD analysis. The hydrogels have been characterized by FTIR spectra, ¹³C‐NMR spectra, CHN analysis, SEM analysis, swelling characteristics, and toxicity study. In vitro release study of model drugs (ciprofloxacin and ornidazole) from hydrogel matrix has been performed in various buffer solutions at 37°C. The drug release kinetics and mechanism have been studied using zero order, first‐order kinetic models, Korsemeyar–Peppas model, Higuchi model, Hixson–Crowell model, and nonlinear Kopcha model. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40039.     

Comparison of osteoconductivity and absorbability of beta-tricalcium phosphate and hydroxyapatite in clinical scenario of opening wedge high tibial osteotomy

The purpose of this study was to compare the osteoconductivity, and absorbability of hydroxyapatite or beta-tricalcium phosphate in clinical scenario of opening wedge high tibial osteotomy Total 41 knees of 40 patients with follow up period of more than 1 year were enrolled. These patients were divided into two groups, Group I (22 knees, 21 patients) used hydroxyapatite and Group II (19 knees, 19 patients) used beta-tricalcium phosphate as a substitute in the opening gap. According to proven method, the osteoconductivity was assessed radiographically by the extent of new bone formation at osteotomy space and absorbability was evaluated by measuring the area occupied by substitute at immediate postoperative, postoperative 6 months and 1 year. Regarding preoperative demographic data, no significant differences were found between two groups. No statistically significant differences were found between two groups regarding lower limb alignment (mechanical femorotibial angle, weight-bearing line%) and posterior tibial slope at postoperative and final follow up radiographs. Concerning the osteoconductivity, there were no significant differences between two groups in any zone. However, the absorption rate was significantly greater in the Group II than in Group I at 6 months (Group I: 13.7?±?6.8, group II: 35.3?±?15.8, P?=?0.001) and 1 year (Group I: 24.2?±?6.3, Group II: 49.6?±?14.3, P?<?0.0001). The complications related to bone substitutes were not observed. Both hydroxyapatite and beta-tricalcium phosphate showed satisfactory gap healing without complications and can be successfully used as alternative healing materials in opening wedge high tibial osteotomy. Our study showed that beta-tricalcium phosphate has superior absorbability than hydroxyapatite. But osteoconductivity showed no significant difference.