Pyrolysis–molecular weight chromatography–vapor-phase infrared spectrophotometry: An on-line system for analysis of polymers. IV. Influence of cis/trans ratio on the thermal degradation of 1,4-polybutadienes

The influence of the cis/trans ratio of 1,4-polybutadienes on the volatile products formed during temperature-programmed thermal degradation to 15% weight loss has been investigated using a mass chromatograph (a gas chromatograph which directly provides mass numbers of resolved components of a mixture) and an “on the fly” vapor-phase infrared spectrophotometer. In order of amounts, major volatile products were 4-vinyl-1-cyclohexene (dimer), 1,3-butadiene (monomer), cyclopentene, and 1,3-cyclohexadiene. With increasing trans content, the relative quantities of 4-vinyl-1-cyclohexene decreased strongly, cyclopentene increased strongly, 1,3-butadiene decreased moderately, and 1,3-cyclohexadiene increased moderately. For a high-trans polybutadiene, increasing the heating rate produced relatively more monomer and dimer but less cyclopentene. Mass chromatograms from 1,4-polybutadienes which had been heated to 15% weight loss in their prehistory were similar to those obtained from 1,2-polybutadiene, indicating that 1,4-polybutadiene undergoes isomerization prior to degradation. Mechanisms for the formation of the main volatile products of decomposition are discussed.     

Structure and viscoelastic properties of epoxy resins prepared from four-nuclei novolacs

The relation between the structure and the viscoelastic properties of seven kinds of epoxy resins was studied. Seven tetraglycidylethers were synthesized from four-nuclei novolacs in which the positions of methylene linkage or number of kind of substituents were different. These epoxy compounds were cured with diaminodiphenylmethane as a hardener. From the viscoelastic properties of the fully cured resins with the hardener, characteristic properties such as glass transition temperature (T_g), average molecular weight between crosslinking points (M̄_c), and front factor (ϕ) were obtained. It was concluded that higher linearity in the main chain of epoxy resins gave a cured resin with a higher T_g, a smaller M̄_c, and a larger ϕ.     

Preparation of Aragonite Whiskers

A simple synthetic method for preparing aragonite whiskers has been developed. A suspension of CaCl₂-MgCl₂-Mg(OH)₂ with pH ∼9 has been prepared by adding Ca(OH)₂ to MgCl₂ aqueous solution. CaCO₃ whiskers (aragonite phase) have been prepared easily by blowing CO₂-containing gas into the suspension. The whiskers have high aspect ratios ranging from 20 to 80 with diameters of 0.5–1 μm .     

Studies on the biaxial stretching of polypropylene film. XI. Type II orientation during [2-2FI]-type stretching and its change by subsequent thermal contraction

In order to study the deformation mechanism of type II stretching, the change in orientation during the restretching and subsequent thermal contraction was investigated by x-ray diffraction method. When a uniaxially oriented film is restretched, the lamellae which are stacked in the stretching direction by the stretching rotate as a whole toward the restretching axis. They rotate backward nearly reversibly during the thermal contraction, unless the restretching exceeds a balancing state, where the orientation in the film plane are equal in all directions. However, when the restretching degree is so high and the film orientation exceeds the balancing state, the lamellar rotation is accompanied by a complex phenomenon. It is considered from the wide-angle and small-angle x-ray diffraction patterns that the lamellar surface becomes indented because of slippage between microfibrils composing the lamellae, and the microfibrils themselves bend at the boundary between the amorphous and crystalline regions within which the tilting of c-axis also occurs. Upon contracting of the film; these changes recover, but even in the last stage of contraction the orientation approaches the symmetrical biaxial orientation but not the uniaxial orientation from which the biaxial orientation is started. These orientation and disorientation behaviors are not affected basically by a slight change in the restretching temperature and the degree of stretching.     

The motion capturing of female divers under water and the trial production of motion viewers for developing a virtual diving experience learning system

The virtual diving experience learning system of “Ama”, Japanese traditional female divers, has been developed to simulate how divers move in a virtual space using the diving interface and utilizing an accelerometer and a gyroscope. This interface not only detects the diving motion but also outputs the movement. Diving motion is shown in the ways of hand motion while standing. Although this makes it possible for a learner to understand the divers’ actions more clearly, this system’s difficulty is in visualizing a divers’ actions including their hands or bodies. Therefore, our study focuses on developing the operation system to reproduce actual ways of Amas’ diving with a virtual human body in a virtual space. First, the motion capture was done in an underwater condition. In the next process, the virtual human body was created. Finally, with the motion viewer, the more vivid actions of the Ama were successfully reproduced much more than in previous attempts. Using this system, the effectiveness of the Amas’ movement learning was confirmed, because a learner practices Amas’ movement.     

Role of granulosa and theca cell interactions in ovarian follicular maturation

We developed a culture system in which two types of ovarian follicular cells were allowed to attach to opposite sides of a collagen membrane. Using this in vitro cell culture system, we studied the effects of granulosa- and theca-cell interaction on the morphology, structure, and function of bovine ovarian follicular cells. In the first part of the study, we explored how the interaction between theca and granulosa cells affects the morphology and structure of the cells. This study was done using follicular cells collected from bovine ovarian follicles at the early developmental stage. Granulosa cells cultured alone were flattened, and formed a monolayer sheet. By contrast, granulosa cells cultured with theca cells were convex, and formed multilayer sheets. Theca cells cultured alone were thin, flat, and spindle-shaped. Theca cells cultured with granulosa cells were also spindle-shaped; however, they appeared convex and more densely packed when compared with theca cells cultured alone. In the second part of the study, the possible role of the cellular interaction in the control of differentiation and growth of granulosa and theca cells was investigated. When follicular cells were isolated from the early stage of follicular development, theca cells reduced progesterone and inhibin production by granulosa cells and augmented the growth of granulosa cells. When the cells were isolated from the late stage of follicular development, by contrast, theca cells augmented hormonal production by granulosa cells, and did not affect the growth of granulosa cells. The growth and androstenedione production by theca cells were increased by the presence of granulosa cells, irrespective of the origin of follicular cells. These results demonstrated that communication between two types of follicular cells results in reciprocal modulation of their morphology, structure, growth, and function. Cellular interactions seem to be one of the major factors controlling the differentiation and growth of the follicular cells during the follicular maturation process. In contrast to granulosa and theca cells cultured alone, cells in the coculture seemed to possess morphological and functional characteristics more similar to those of cells in the growing follicular wall in vivo. Thus, we speculate that the interaction between these two types of follicular cells is essential for the maintenance of original structure and function of the bovine follicular wall.     

Numerical calculations of the effect of moisture content and moisture flow on ionic multi-species diffusion in the pore solution of porous materials

A method to analyse and calculate concentration profiles of different types of ions in the pore solution of porous materials such as concrete subjected to external wetting and drying is described. The equations in use have a solid theoretical meaning and are derived from a porous media technique, which is a special branch of the more general mixture theory. The effect of chemical action is ignored, making the presented model suitable to be implemented into codes dealing solely with chemical equilibrium.     

Numerical analysis of variability in ultrasound propagation properties induced by trabecular microstructure in cancellous bone

The manner by which the trabecular microstructure affects the propagation of ultrasound waves through cancellous bone is numerically investigated by finite difference time-domain (FDTD) simulation. Sixteen 3-D numerical models of 6.45times6.45times6.45 mm with a voxel size of 64.5 mum are reconstructed using a 3-D microcomputed tomographic (muCT) image taken from a bovine cancellous bone specimen of approximately 20times20times9 mm. All cancellous bone models have an oriented trabecular structure, and their trabecular elements are gradually eroded to increase the porosity using an image processing technique. Three erosion procedures are presented to realize various changes in the trabecular microstructure with increasing porosity. FDTD simulations of the ultrasound pulse waves propagating through the cancellous bone models at each eroded step are performed in 2 cases of the propagations parallel and perpendicular to the major trabecular orientation. The propagation properties of the wave amplitudes and propagation speeds are derived as a function of the porosity, and their variability due to the trabecular microstructure is revealed. To elucidate an effect of the microstructure, the mean intercept length (MIL), which is a microstructural parameter, is introduced, and the correlations of the propagation properties with the MILs of the trabecular elements and pore spaces are investigated.