The Importance of G Protein-Coupled Receptor Kinase 4 (GRK4) in Pathogenesis of Salt Sensitivity,Salt Sensitive Hypertension and Response to Antihypertensive Treatment

Salt sensitivity is probably caused by either a hereditary or acquired defect of salt excretion by the kidney, and it is reasonable to consider that this is the basis for differences in hypertension between black and white people. Dopamine acts in an autocrine/paracrine fashion to promote natriuresis in the proximal tubule and thick ascending loop of Henle. G-protein receptor kinases (or GRKs) are serine and threonine kinases that phosphorylate G protein-coupled receptors in response to agonist stimulation and uncouple the dopamine receptor from its G protein. This results in a desensitisation process that protects the cell from repeated agonist exposure. GRK4 activity is increased in spontaneously hypertensive rats, and infusion of GRK4 antisense oligonucleotides attenuates the increase in blood pressure (BP). This functional defect is replicated in the proximal tubule by expression of GRK4 variants namely p.Arg65Leu, p.Ala142Val and p.Val486Ala, in cell lines, with the p.Ala142Val showing the most activity. In humans, GRK4 polymorphisms were shown to be associated with essential hypertension in Australia, BP regulation in young adults, low renin hypertension in Japan and impaired stress-induced Na excretion in normotensive black men. In South Africa, GRK4 polymorphisms are more common in people of African descent, associated with impaired Na excretion in normotensive African people, and predict blood pressure response to Na restriction in African patients with mild to moderate essential hypertension. The therapeutic importance of the GRK4 single nucleotide polymorphisms (SNPs) was emphasised in the African American Study of Kidney Disease (AASK) where African-Americans with hypertensive nephrosclerosis were randomised to receive amlodipine, ramipril or metoprolol. Men with the p.Ala142Val genotype were less likely to respond to metoprolol, especially if they also had the p.Arg65Leu variant. Furthermore, in the analysis of response to treatment in two major hypertension studies, the 65Leu/142Val heterozygote predicted a significantly decreased response to atenolol treatment, and the 65Leu/142Val heterozygote and 486Val homozygote were associated in an additive fashion with adverse cardiovascular outcomes, independent of BP. In conclusion, there is considerable evidence that GRK4 variants are linked to impaired Na excretion, hypertension in animal models and humans, therapeutic response to dietary Na restriction and response to antihypertensive drugs. It may also underlie the difference in hypertension between different geographically derived population groups, and form a basis for pharmacogenomic approaches to treatment of hypertension.     

Mechanical and thermal properties of wood fibers reinforced poly(lactic acid)/thermoplasticized starch composites

Thermoplasticized starch (TPS) filled poly(lactic acid) (PLA) blends are usually found to have low mechanical properties due to poor properties of TPS and inadequate adhesion between the TPS and PLA. The purpose of this study was to investigate the reinforcing effect of wood fibers (WF) on the mechanical properties of TPS/PLA blends. In order to improve the compatibility of wood with TPS/PLA blends, maleic anhydride grafted PLA (MA‐g‐PLA) copolymer was synthesized and used. TPS, TPS/PLA blends, and WF reinforced TPS/PLA composites were prepared by twin‐screw extrusion and injection molded. Scanning electron microscope and crystallinity studies indicated thermoplasticity in starch. WF at two different weight proportions, that is, 20% and 40% with respect to TPS content were taken and MA‐g‐PLA at 10% to the total weight was chosen to study the effect on mechanical properties. At 20% WF and 10% MA‐g‐PLA, the tensile strength exhibited 86% improvement and flexural strength exhibited about 106% improvement over TPS/PLA blends. Increasing WF content to 40% further enhanced tensile strength by 128% and flexural strength by 180% with respect to TPS/PLA blends. Thermal behavior of blends and composites was analyzed using dynamic mechanical analysis and thermogravimetric analysis. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46118.     

Study of different approaches for management of contaminated emulsified aqueous secondary waste

The underlying objective governing the management of radioactive waste is protection of human being and the environment, now as well as in the future. As a waste management philosophy, utmost emphasis is given to waste volume minimization at all stages of design, operation and maintenance [1]. The development of innovative treatment processes for low and intermediate level wastes (LLW and ILW) in recent times has focused on volume reduction as one of the main objectives [2]. During reprocessing of spent fuel, an optimized mixture of tri-n-butyl phosphate (TBP) and dodecane is used as an extracting agent for actinides. During their repeated use, solvent undergoes chemical/radiolytic degradation, loosing its efficiency and hence to be discarded as spent organic solvent waste. This waste is presently being treated by alkaline hydrolysis process where spent solvent is refluxed with concentrated sodium hydroxide solution at 110°C [3]. TBP component of the spent solvent waste gets hydrolyzed and is converted into sodium salt of di-butyl phosphate (DBP). The other products obtained during hydrolysis include sodium salt of mono-butyl phosphate (MBP), butanol and phosphoric acid. Dodecane component of the spent solvent waste does not take part in the hydrolysis reaction and appears as a clear phase. The dodecane waste thus separated is subjected for thermal destruction by incineration. The emulsified aqueous layer thus obtained retains most of the activity present in the spent solvent waste. The present paper describes experimental studies performed to look for various approaches for management of this type of waste.     

Estrogen content of dairy and swine wastes

Naturally occurring estrogens in animal wastes may cause negative environmental impacts, yet their abundance in animal waste treatment and storage structures is poorly documented. To better quantify estrogen concentrations in animal wastes, multiple waste samples were collected from treatment and storage structures at dairy and swine facilities and analyzed for concentrations of 17beta-estradiol (E2), estrone (E1), and 17alpha-estradiol by gas chromatography-mass spectroscopy and by enzyme linked immunosorbent assay (E2 only). Mass ratios of each estrogen to the macronutrients nitrogen, phosphorus, and potassium were also determined. Because manure application rates are typically macronutrient-based, estrogen to macronutrient ratios are proportional to areal mass application rates of estrogen to fields. Swine farrowing waste (from farrowing sows and piglets) had the highest ratios of E2 to macronutrients. Mean ratios in swine farrowing waste were roughly twice those in swine finishing waste (from growing male and nonpregnant female animals) and more than four times higher than those in dairy waste (from lactating cows in various stages of their reproductive cycles); these differences were statistically significant (alpha = 0.05). Estrone followed a similar trend. In contrast, ratios of 17alpha-estradiol to macronutrients were highest in dairy operations. These results can be used to better predict estrogen loading rates on fields receiving swine and dairy wastes.     

Kinetics of crack healing and self-repair behaviors in a sealant glass for SOFC applications

A sealant is required for the solid oxide fuel cell (SOFC) to maintain hermeticity at high operating temperatures, keep fuel and oxidant from mixing, and avoid shorting of the cell stack. Glass and glass–ceramic materials are widely used as a sealant because their properties can be tailored to meet the stringent requirements of SOFC stack, but they are susceptible to cracking. In contrast, a promising concept of self-repairable glass for seals is pursued for making reliable seals that can self-repair cracks at the SOFC operating temperatures. This concept is studied through measuring crack-healing kinetics and independent measurement of glass viscosity for relating to the observed self-repair. The cracks on the glass surface are created using a Vickers indenter to achieve a well-defined crack geometry, and then the glass is exposed to elevated temperatures for different length of times to study the crack-healing kinetics. The crack-healing kinetics is compared with the predictions of our theoretical model and found to be in good agreement. In addition, glass viscosity is extracted from the healing kinetics and compared with the independent measurement of viscosity measured from the dilatometry and sintering data to further validate the crack-healing theoretical model. These results are presented and discussed.     

Sintering and thermal expansion behaviors of glass and glass–YSZ composites as self-repairable seals for SOFC

Glass and glass–ceramics are used as sealants in solid oxide fuel cell (SOFC) because their thermophysical properties can be tailored to meet the stringent requirements of the SOFC stack. The processing, sintering, and thermal expansion behaviors of self-healing and non-crystallizing glass and glass containing 10%–30 wt.% non-reacting yttria-stabilized zirconia (YSZ) are studied. The addition of inert YSZ to glass significantly retarded the sintering behavior. Thermal expansion behaviors of glass and glass–YSZ are also measured to study the role of YSZ addition on the glass transition, softening point, and coefficient of thermal expansion (CTE). It is shown that the densification is controlled by the viscous sintering mechanism, in which the addition of YSZ increased the effective viscosity of the glass–YSZ as evident from higher glass transition and softening temperatures and decreased CTE. These results demonstrated that the addition of YSZ to glass is promising for achieving optimum thermophysical properties useful as seals for SOFC.     

Crystallization of Polymer-Derived Silicon Carbonitride at 1873 K under Nitrogen Overpressure

The chemical stability of an amorphous silicon carbonitride ceramic, having the composition 0.57SiC·0.43Si₃N₄·0.49C is studied as a function of nitrogen overpressure at 1873 K. The ceramic suffers a weight loss at p _N2 < 3.5 bar (1 bar = 100 kPa), does not show a weight change from 3.5 to 11 bar, and gains weight above 11 bar. The structure of the ceramic changes with pressure: it is crystalline from 1 to 6 bar, amorphous at ∼10 bar, and is crystalline above ∼10 bar. The weight-loss transition, at 3.5 bar, is in excellent agreement with the prediction from thermodynamic analysis when the activities of carbon, SiC, and Si₃N₄ are set equal to those of the crystalline forms; this implies that the material crystallizes before decomposition. The amorphous to crystalline transition that occurs at ∼10 bar, and which is accompanied by weight gain, is likely to have taken place by a different mechanism. A nucleation and growth reaction with the atmospheric nitrogen is proposed as the likely mechanism. The supersaturation required to nucleate α-Si₃N₄ crystals is calculated to be 30 kJ/mol.     

In Vitro Antiamoebic Activity Evaluation and Docking Studies of Metronidazole–Triazole Hybrids

An in‐house database of 520 compounds was docked against Entamoeba histolytica thioredoxin reductase (EhTrR), a promising target for the treatment of amoebiasis. Amongst these, some metronidazole (MTZ)–triazole hybrids were ranked high, with docking scores from ?10.23 to ?7.56. Studies of the binding orientations and conformations show that the head groups of MTZ–triazole hybrids interact with the arginine residues within the binding pocket of EhTrR, making it clear that such is the optimal and most reliable orientation for this class of compounds. The top‐ten MTZ–triazole hybrids were then selected for evaluation of their activity against the HM1:IMSS strain of amoeba. The most active compound, 2‐pyridyl‐(1,2,3‐triazolyl)metronidazole 10 , with an IC₅₀ value of 8.4 nM , was significantly more active than the standard drug MTZ alone. Docking studies revealed that compound 10 may act as an EhTrR inhibitor with activity in the nanomolar range and satisfactory ADME properties; it is a suitable candidate to be carried forward as a potential lead in the discovery of drugs to combat amoebiasis.     

Various strategies for reducing Nox emissions of biodiesel fuel used in conventional diesel engines: A review

Energy demand, decreasing fossil fuel reserves, and health-related issues about pollutants have led researchers to search for renewable alternative fuels to either partially or fully replace fossil fuels. Among many alternative fuels, biodiesel became one of the most popular choices due to similar properties to that of conventional diesel. Biodiesel produces slightly lower brake thermal efficiency compared to that of conventional biodiesel, but has an advantage of reduced emissions of CO₂, CO, HC, and smoke. However, biodiesel shows higher NOx emission which, when used in increased biodiesel market, may become a serious problem. Various strategies were attempted by different researcher to reduce NOx emissions. In this paper, various strategies, adapted for reducing NOx emissions of biodiesel fuel used in diesel engines for automobile applications, are reviewed and discussed. The strategies are grouped into three major groups, namely combustion treatments, exhaust after-treatments, and fuel treatments. Among various strategies discussed, fuel treatments, such as low temperature combustion, mixing fuel additives and reformulating fuel composition, reduce NOx emission without compromising other emission and performance characteristics and they seem to be promising for future biodiesel fuel.     

Mechanical property enhancement of non‐bonding electrospun mats via adhesive

In the present study, the effect of adhesive on the morphology of different electrospun polymeric mats was investigated. The modification of two polymers, poly(methyl methacrylate) and poly(vinyl chloride), was carried out by blending the polymers with different amounts of poly(butyl acrylate) (PBA) adhesive to investigate the effect of different amounts of adhesive with heat hardener in hybrid mats. The introduction of various concentrations of PBA into different polymer solutions led to the formation of point‐bonded electrospun fibrous mats. Scanning electron microscopy images indicated that point‐bonded polymer/adhesive fibers were uniformly distributed throughout the mats. Fourier transform infrared spectrometry, contact angle measurements and thermogravimetric analysis were used to study the different properties of the hybrid mats. The tensile strength of the blended fibrous electrospun mats was increased effectively. This enhancement of the mechanical properties of the mats due to the presence of adhesive increases the number of potential applications of the electrospun mats, especially for mechanically weak polymers. Copyright © 2012 Society of Chemical Industry