Error analysis of equilibrium studies for the almond shell activated carbon adsorption of Cr(VI) from aqueous solutions

In this study, the preparation of activated carbon from almond shell with H2SO4 activation and its ability to remove toxic hexavalent chromium from aqueous solutions are reported. The influences of several operating parameters such as pH, particle size and temperature on the adsorption capacity were investigated. Adsorption of Cr(VI) is found to be highly pH, particle size and temperature dependent. Four adsorption isotherm models namely, Langmuir, Freundlich, Tempkin and Dubinin-Radushkevich were used to analyze the equilibrium data. The Langmuir isotherm provided the best correlation for Cr(VI) onto the almond shell activated carbon (ASC). Adsorption capacity was calculated from the Langmuir isotherm as 190.3 mg/g at 323 K. Thermodynamic parameters were evaluated and the adsorption was endothermic showing monolayer adsorption of Cr(VI). Five error functions were used to treat the equilibrium data using non-linear optimization techniques for evaluating the fit of the isotherm equations. The highest correlation for the isotherm equations in this system was obtained for the Freundlich isotherm. ASC is found to be inexpensive and effective adsorbent for removal of Cr(VI) from aqueous solutions.     

Treatment of levafix orange textile dye solution by electrocoagulation

The decolorization of the levafix orange textile dye in aqueous solution by electrocoagulation using aluminum sacrificial anode has been investigated. The process performance is analyzed in terms of decolorization efficiency and the important cost-related parameters such as electrode and energy consumptions, as a function of initial pH, conductivity, current density, initial dye concentration and electrolysis time. The present study proves the effectiveness of electrochemical treatment for the textile dye solution. 95% decolorization efficiency may be obtained at suitable operating conditions such as; current density 100 A/m(2), operating time 12 min and initial pH 6.4. The corresponding electrode and energy consumptions during the electrolysis were found to be 1.8 kg Al/kg dye and 35 k Wh/kg dye.     

Ureteroscopic management of lower ureteral stones: two years'' experience

1. This study was to determine the effects of heat load early in life on thermoregulatory responses and whole blood viscosity of broilers during a subsequent exposure to high environmental temperature later in life. 2. The birds, which had been subjected to exposure to 38 degrees C for 24 h at 5-d-old, served as prior exposure group (group A). Both group A and control group B were exposed to 33 degrees C for 3 h when near marketable weight. 3. On exposure to 33 degrees C, although there were no significant differences in the increases in heat production (HP) between the two groups, abdominal temperature (Ta), temperature of external ear tract (Tee), shank skin temperature (Tss), standing-lying frequency and lying time were lower in group A than in group B. Heart rate (HR) and comb surface temperature (Tcs) did not differ but increased in both groups during exposure to 33 degrees C. Respiration rate (RR) was greater in group A. 4. Blood viscosity decreased markedly in both groups after exposure to 33 degrees C; the decrease was greater in group A. 5. These results suggest that early exposure may promote broilers' ability to cope with the subsequent heat load by altering thermoregulatory physiological responses and behavioural patterns, resulting in an alleviation of heat stress.     

Effect of carrier type on coupled transport kinetics of thiocyanate ions through liquid membranes

Coupled transport of thiocyanate ions through a liquid membrane containing quaternary ammonium chloride salts in chloroform was examined. The influences of the carrier type in the membrane phase on the coupled transport of thiocyanate ions were investigated. The kinetics of the coupled transport were analyzed in the formalism of two consecutive irreversible first-order reactions and the kinetic parameters (k_1d, k_2m, k_2a, R_m^max, t_max, J_d^max, J_amax) were also calculated. For the coupled transport of thiocyanate ions, quaternary ammonium chloride salts having different carbon atom numbers (C_n) used as carriers were found to increase thiocyanate ions transport efficiency with increasing carbon atom numbers. Tetradecyl trimethylammonium chloride (TDTMACl), hexadecyl trimethylammonium chloride (HDTMACl), and tetraoctyl ammonium chloride (TOACl) were found to be the most effective carrier types for transport of thiocyanate ions when C_n is greater than 16. The activation energies for maximum membrane entrance and exit fluxes were calculated as 32.45 kJ/mol and 34.75 kJ/mol, respectively. The values of the activation energy indicate that the process is controlled by species diffusion.     

Optimization of municipal solid waste (MSW) disposal in Saudi Arabia

Municipal solid waste (MSW) mainly comprises organics, paper, glass, plastics, metals, wood, etc. Rapid industrialization, high population growth rate, and fast urbanization have resulted in increased levels of pollution and MSW in Saudi Arabia. The amount of waste has been steadily increasing due to increasing human population and urbanization. Recovery refers to materials removed from the waste stream for the purpose of recycling and/or composting. There are various options available to convert solid waste to energy. Mainly, the following types of technologies are available: (1) sanitary landfill, (2) incineration, (3) pyrolysis, (4) gasification, and (5) anaerobic digestion. An integrated MSW disposal policy comprises (1) reduction of MSW source, (2) reuse of MSW, (3) recycling of MSW, (4) landfill and gas-to-energy conversion, and (5) MSW-to-energy conversion. Traditionally, MSWs have been disposed in landfills. Landfill is the most inexpensive waste disposal option. The main MSW disposal policies and barriers have been concluded in this study.     

Down syndrome associated with systemic lupus erythematosus: a mere coincidence or a significant association?

An 8-year-old male, who had Down syndrome associated with systemic lupus erythematosus (SLE), is described. He also had a partial complement 4 deficiency. This case is a reminder that the physician should be aware of the possibility of an immune defect in a male presenting with SLE at a young age. The question of whether the association of Down syndrome with SLE is coincidental or whether there is a predilection for autoimmune disorders in Down syndrome is discussed.     

Tunable Fano-Resonant Metasurfaces on a Disposable Plastic-Template for Multimodal and Multiplex Biosensing

Metasurfaces are engineered nanostructured interfaces that extend the photonic behavior of natural materials, and they spur many breakthroughs in multiple fields, including quantum optics, optoelectronics, and biosensing. Recent advances in metasurface nanofabrication enable precise manipulation of light–matter interactions at subwavelength scales. However, current fabrication methods are costly and time-consuming and have a small active area with low reproducibility due to limitations in lithography, where sensing nanosized rare biotargets requires a wide active surface area for efficient binding and detection. Here, a plastic-templated tunable metasurface with a large active area and periodic metal–dielectric layers to excite plasmonic Fano resonance transitions providing multimodal and multiplex sensing of small biotargets, such as proteins and viruses, is introduced. The tunable Fano resonance feature of the metasurface is enabled via chemical etching steps to manage nanoperiodicity of the plastic template decorated with plasmonic layers and surrounding dielectric medium. This metasurface integrated with microfluidics further enhances the light–matter interactions over a wide sensing area, extending data collection from 3D to 4D by tracking real-time biomolecular binding events. Overall, this work resolves cost- and complexity-related large-scale fabrication challenges and improves multilayer sensitivity of detection in biosensing applications.     

Utilization of lignite ash in concrete mixture

In this article 11 ashes from various Turkish lignite sources were studied to show the effects upon lignite ash quality for use as a mineral admixture in concrete. The lignite ashes were classified into two general types (Class A and Class B) based on total of silica, alumina, and iron oxide. Total content of the three major oxides must be more than 50 % for Class A lignite ash and more than 70 % for Class B lignite ash. When 25 % of the cement was replaced by LA-1 (Class A) lignite ash, based on 300 kg/m³ cementitious material, the 28-day compressive strength increased 24.3 % compared to the control mix. The optimal lignite ash replacement was 25 % at 300 kg/m³ cementitious material.