Study the Output Characteristics of a 90 kJ Filippove-Type Plasma Focus

The output characteristics of a Filippove-Type plasma focus “Dena” (288 μF, 25 kV, 90 kJ) is numerically investigated by considering the voltage, current, current derivative, and maximum current as a function of capacitor bank energy in the constant Argon gas pressure and compared to the experiment. It is shown that increase on the bank energy leads to the increment on the maximum current and decrement on the pinch time.     

Plasma Focus Device as a Breeder of 14.66 MeV Protons to Produce Short-Lived Radioisotopes

In plasma focus devices filled deuterium gas with low pressure admixture gas, ³He, the deuterium creates high energy protons of 14.66 MeV through the ³He(d, p) ⁴He(Q = 18.35 MeV) fusion reaction. This reaction takes place due to the thermal and non-thermal (beam-target) mechanisms. The proton yield production for deuterium filling gas is determined by using the beam-target character of the pinched plasma and moving boiler model. If we use a low pressure admixture gas like ¹¹B, these high energy protons in turn, could generate short-lived radioisotopes like ¹¹C (used in positron emission tomography) via the ¹¹B(p, n)¹¹C reaction. Calculations indicate the influence of drive parameter to the final yield for a Mather type device.     

ZnO Nanoparticles as Ethanol Gas Sensors and the Effective Parameters on Their Performance

<正>ZnO nanoparticles are synthesized and applied as ethanol gas sensors.In some cases,the sensitivity and response time of these particles are shown to be higher than that has been reported in the literature.It has been investigated that the most possible reason for this higher gas sensing performance can be attributed to the quantity of the activity coefficient of its initial components.However,other effects such as pH and thermal decomposition are of importance as well.Specific ion interaction(SIT) model is applied to derive the mean activity coefficient values of the additives used in synthesis of ZnO nanoparticles.     

Boehmite nanopetals self assembled to form rosette-like nanostructures

Rosette-like boehmite nanostructures were prepared successfully via a simple hydrothermal process. The obtained material was characterized with X-ray powder diffractometry (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Using Scherrer formula, the average crystallite size of the obtained boehmite rosettes was measured to be about 8 nm. It was shown that boehmite nanopetals with average width of about 41 nm determined by TEM, were formed during the hydrothermal process and then self assembled due to weak hydrogen bonds to fabricate boehmite rosettes. The specific surface area of the obtained rosette-like nanostructures was calculated through BET N₂-adsorption technique to be about 143.08 m²/g.     

Enhanced dielectric and piezoelectric response in PZT superlattice-like films by leveraging spontaneous Zr/Ti gradient formation

Spontaneous Zr/Ti gradient formation during crystallization in sol-gel-processed Pb(Zr_xTi_1−x)O₃ films is used to prepare superlattice-like (SL), highly (1 0 0)-oriented thin films on Pt/Ti/SiO₂/Si substrates. SLs with stacking periodicity ranging from 13 up to 60 nm are synthesized with compositional gradient normal to the film surface and composition centered at x ≈ 0.53. X-ray diffraction (XRD) shows high order satellite peaks and no secondary phases. XRD structural refinement, along with XPS depth profile chemical analysis, reveals that the crystal structure alternates between rhombohedral and in-plane polarized tetragonal phases, effectively corresponding to “artificially created” phase boundaries. SL films have ∼45% and ∼20% higher d_33,f piezoelectric coefficient and dielectric permittivity, respectively, with respect to compositional-gradient-free films of similar thickness, possibly due to enhanced reorientation of electrical dipoles and higher extrinsic contributions due to the motion of the “artificially created” phase boundaries in SL films. Dielectric nonlinear studies indicate a higher amount of extrinsic contributions to the dielectric response in SL and gradient-enhanced films than in conventional films of similar average composition. This processing method provides a simple chemical route to create thin ferroelectric films with enhanced dielectric and piezoelectric properties suitable for a range of miniaturized applications.     

Bio‐lubricant flow behaviour in mini‐channels

One of the most common causes of failures in total joint replacements is the generation of wear particles within the joint. This contributes to bone lost and aseptic loosening of the implant, eventually requiring its replacement. Many studies have been carried out to improve the wear characteristics of bearing surfaces in total joint replacement. From the lubrication point of view, the friction behaviour of surfaces and rheology of the joint lubricant (synovial fluid) have been extensively studied. However, little attention has been paid to the interaction between the lubricant and the bearing surfaces. The aim of this study is to develop a methodology for studying the behaviour of bio‐based lubricant in mini‐channels. For this purpose, micro‐particle image velocimetry was used in order to characterise the lubricant behaviour. Channels made of relevant materials such as ultra‐high molecular weight polyethylene, cobalt–chromium–molybdenum alloy and titanium–aluminium–vanadium alloy with 1 and 1.5 mm width, 45 mm length and 2 mm depth were experimentally investigated. Results suggested that the used polymeric solution interaction with solid surfaces is very sensitive to the polymer concentration in the lubricant. Moreover, it was observed that there exist differences between water (Newtonian reference fluid) and the polymeric solution behaviour even at very simple movements; although usually, the properties of this lubricant at high shear rates are estimated by water properties. Copyright © 2015 John Wiley & Sons, Ltd.     

Performance evaluation of polymer/clay nanocomposite thermal protection systems based on polyethylene glycol phase change material

Phase change materials (PCMs) are substances with a high heat of fusion which, through melting and solidifying at specified temperatures, are capable of storing or releasing a large amount of thermal energy. This phenomenon can be utilized in designing the heat protective materials as well as in the thermal energy storage systems. In this work, effects of polyethylene glycol (PEG) as PCM and montmorillonite nanoclay, as a thermal property modifier in epoxy resin on the thermal protection performance of nanocomposites were studied. A special performance evaluation test was designed to study the top surface temperature behavior of prepared samples under back surface heating. Results indicated that increasing PCM content improved thermal protection performance, but lower thermal diffusivity was found for the sample containing 60 wt% of PEG, with a 31 % decrease in top surface temperature. These results show that increasing of top surface temperature of samples containing PCM was very slow when compared with the neat epoxy sample. A top surface temperature behavior of these samples shows a plateau in melting region of PCM which makes a delay time in temperature increment compared with that of the neat epoxy sample. Moreover, heat protection performances of low filled nanocomposite blends, i.e., nanocomposite blends with 5 and 7 wt% of clay in PEG have been improved about 10 % in comparison with EP/PEG60 blend.     

The role of hydrocolloids in the development of gluten-free cereal-based products for coeliac patients: a review

A growing number of diseases in association with gluten intake, such as coeliac disease, have led to increasing demand for gluten-free products as a crucial economic and health issue. Gluten-free products, because of the absence of gluten, usually have a poor texture, taste and appearance. Therefore, the production of good quality gluten-free products with substances that can somehow mimic the viscoelastic properties of gluten is an important challenge. Recently, hydrocolloids are widely used to improve the quality and shelf-life of gluten-free products. In this study, the effect of hydrocolloids on the production of gluten-free cereal-based products, such as breads, cakes and muffins, biscuits and cookies, pasta and noodles, has been reviewed as well as their nutritional values. In general, this study could suggest key factors in the improvement of gluten-free products.     

Broadband microwave absorber based on patterned surface structure

Journal of Materials Science: Materials in Electronics - The limitations of traditional flat microwave absorbers in terms of material parameters make it challenging to improve the working...