Large-scale parallel arrays of silicon nanowires via block copolymer directed self-assembly

Extending the resolution and spatial proximity of lithographic patterning below critical dimensions of 20 nm remains a key challenge with very-large-scale integration, especially if the persistent scaling of silicon electronic devices is sustained. One approach, which relies upon the directed self-assembly of block copolymers by chemical-epitaxy, is capable of achieving high density 1?:?1 patterning with critical dimensions approaching 5 nm. Herein, we outline an integration-favourable strategy for fabricating high areal density arrays of aligned silicon nanowires by directed self-assembly of a PS-b-PMMA block copolymer nanopatterns with a L(0) (pitch) of 42 nm, on chemically pre-patterned surfaces. Parallel arrays (5 × 10(6) wires per cm) of uni-directional and isolated silicon nanowires on insulator substrates with critical dimension ranging from 15 to 19 nm were fabricated by using precision plasma etch processes; with each stage monitored by electron microscopy. This step-by-step approach provides detailed information on interfacial oxide formation at the device silicon layer, the polystyrene profile during plasma etching, final critical dimension uniformity and line edge roughness variation nanowire during processing. The resulting silicon-nanowire array devices exhibit Schottky-type behaviour and a clear field-effect. The measured values for resistivity and specific contact resistance were ((2.6 ± 1.2) × 10(5)Ωcm) and ((240 ± 80) Ωcm(2)) respectively. These values are typical for intrinsic (un-doped) silicon when contacted by high work function metal albeit counterintuitive as the resistivity of the starting wafer (～10 Ωcm) is 4 orders of magnitude lower. In essence, the nanowires are so small and consist of so few atoms, that statistically, at the original doping level each nanowire contains less than a single dopant atom and consequently exhibits the electrical behaviour of the un-doped host material. Moreover this indicates that the processing successfully avoided unintentional doping. Therefore our approach permits tuning of the device steps to contact the nanowires functionality through careful selection of the initial bulk starting material and/or by means of post processing steps e.g. thermal annealing of metal contacts to produce high performance devices. We envision that such a controllable process, combined with the precision patterning of the aligned block copolymer nanopatterns, could prolong the scaling of nanoelectronics and potentially enable the fabrication of dense, parallel arrays of multi-gate field effect transistors.     

Heterologous Expression and Structural Characterisation of a Pyrazinone Natural Product Assembly Line

Through a number of strategies nonribosomal peptide assembly lines give rise to a metabolic diversity not possible by ribosomal synthesis. One distinction within nonribosomal assembly is that products are elaborated on an enzyme‐tethered substrate, and their release is enzyme catalysed. Reductive release by NAD(P)H‐dependent catalysts is one observed nonribosomal termination and release strategy. Here we probed the selectivity of a terminal reductase domain by using a full‐length heterologously expressed nonribosomal peptide synthetase for the dipeptide aureusimine and were able to generate 17 new analogues. Further, we generated an X‐ray structure of aureusimine terminal reductase to gain insight into the structural details associated with this enzymatic domain.     

Effect of betaine supplementation on cycling sprint performance

Purpose

To examine the effect of betaine supplementation on cycling sprint performance.

Methods

Sixteen recreationally active subjects (7 females and 9 males) completed three sprint tests, each consisting of four 12 sec efforts against a resistance equal to 5.5% of body weight; efforts were separated by 2.5 min of cycling at zero resistance. Test one established baseline; test two and three were preceded by seven days of daily consumption of 591 ml of a carbohydrate-electrolyte beverage as a placebo or a carbohydrate-electrolyte beverage containing 0.42% betaine (approximately 2.5 grams of betaine a day); half the beverage was consumed in the morning and the other half in the afternoon. We used a double blind random order cross-over design; there was a 3 wk washout between trials two and three. Average and maximum peak and mean power were analyzed with one-way repeated measures ANOVA and, where indicated, a Student Newman-Keuls.

Results

Compared to baseline, betaine ingestion increased average peak power (6.4%; p < 0.001), maximum peak power (5.7%; p < 0.001), average mean power (5.4%; p = 0.004), and maximum mean power (4.4%; p = 0.004) for all subjects combined. Compared to placebo, betaine ingestion significantly increased average peak power (3.4%; p = 0.026), maximum peak power max (3.8%; p = 0.007), average mean power (3.3%; p = 0.034), and maximum mean power (3.5%; p = 0.011) for all subjects combined. There were no differences between the placebo and baseline trials.

Conclusions

One week of betaine ingestion improved cycling sprint power in recreationally active males and females.     

The Global Architectural Influences on London

London today has become ‘a laboratory and testing ground’ for neoliberal capitalism, attracting investment from the Middle East, Russia, India, the Far East and Australasia as well as the US. Murray Fraser describes the urban impact of economic globalisation in the capital, while exploring ways that it might potentially be countered. Copyright © 2012 John Wiley & Sons, Ltd.     

Visual color perception in green exercise: positive effects on mood and perceived exertion

Positive effects of green exercise on physical and psychological wellbeing have been found, yet little is known about the underlying cognitive mechanisms responsible for such effects. The purpose of this visual sensation study was to establish the extent to which the color green, as a primitive visual feature of many natural environments, contributes to the green exercise effect. Fourteen participants performed three moderate-intensity 5-min cycling tasks (50% peak power output) while watching video footage of a rural cycling course that simulated cycling through a real natural environment. The three randomly counter-balanced video conditions were unedited (V(GREEN)), achromatic (V(GRAY)) or red filter (V(RED)). Lower total mood disturbance and ratings of perceived exertion were found during the V(GREEN) compared to V(GRAY) and V(RED). Feelings of anger were higher after V(RED) compared to the other conditions. Feelings of tension, depression, fatigue, vigor, and confusion did not differ among conditions. This is the first study to show that the color green, as a primitive feature of visual sensation, has a contributory effect toward positive green exercise outcomes.     

Quantitative assessment of the sulfuric acid contribution to new particle growth

The Nano Aerosol Mass Spectrometer (NAMS) was deployed to rural/coastal and urban sites to measure the composition of 20-25 nm diameter nanoparticles during new particle formation (NPF). NAMS provides a quantitative measure of the elemental composition of individual, size-selected nanoparticles. In both environments, particles analyzed during NPF were found to be enhanced in elements associated with inorganic species (nitrogen, sulfur) relative to that associated with organic species (carbon). A molecular apportionment algorithm was applied to the elemental data in order to place the elemental composition into a molecular context. These measurements show that sulfate constitutes a substantial fraction of total particle mass in both environments. The contribution of sulfuric acid to new particle growth was quantitatively determined and the gas-phase sulfuric acid concentration required to incorporate the measured sulfate fraction was calculated. The calculated values were compared to those calculated by a sulfuric acid proxy that considers solar radiation and SO(2) levels. The two values agree within experimental uncertainty. Sulfate accounts for 29-46% of the total mass growth of particles. Other species contributing to growth include ammonium, nitrate, and organics. For each location, the relative amounts of these species do not change significantly with growth rate. However, for the coastal location, sulfate contribution increases with increasing temperature whereas nitrate contribution decreases with increasing temperature.     

Effects of hydrolysis on solid-state relaxation and stickiness behavior of sodium caseinate-lactose powders

Hydrolyzed or nonhydrolyzed sodium caseinate-lactose dispersions were spray dried, at a protein: lactose ratio of 0.5, to examine the effects of protein hydrolysis on relaxation behavior and stickiness of model powders. Sodium caseinate (NC) used included a nonhydrolyzed control (DH 0) and 2 hydrolyzed variants (DH 8.3 and DH 15), where DH = degree of hydrolysis (%). Prior to spray drying, apparent viscosities of liquid feeds (at 70°C) at a shear rate of 20/s were 37.6, 3.14, and 3.19 mPa·s, respectively, for DH 0, DH 8, and DH 15 dispersions. Powders containing hydrolyzed casein were more susceptible to sticking than those containing intact NC. The former had also lower bulk densities and powder particle sizes. Scanning electron microscopy showed that hydrolyzed powders had thinner particle walls and were more friable than powders containing intact NC. Secondary structure of caseinates, determined by Fourier transform infrared spectroscopy, was affected by the relative humidity of storage and the presence of lactose as co-solvent rather than its physical state. Glass transition temperatures and lactose crystallization temperatures, determined by differential scanning calorimetry were not affected by caseinate hydrolysis, although the effects of protein hydrolysis on glass-rubber transitions (T(gr)) could be determined by thermo-mechanical analysis. Powders containing hydrolyzed NC had lower T(gr) values (~30°C) following storage at a higher subcrystallization relative humidity (33%) compared with powder with nonhydrolyzed NC (T(gr) value of ~40°C), an effect that reflects more extensive plasticization of powder matrices by moisture. Results support that sodium caseinate-lactose interactions were weak but that relaxation behavior, as determined by the susceptibility of powder to sticking, was affected by hydrolysis of sodium caseinate.     

Comparison of the sulfur hexafluoride tracer and respiration chamber techniques for estimating methane emissions and correction for rectum methane output from dairy cows

The objectives of the present study were to compare the sulfur hexafluoride (SF₆) and respiration chamber techniques for measuring methane (CH₄) emissions from dairy cows and to determine the proportion of CH₄ that is released through the rectum. Data used were derived from 20 early lactation dairy cows in a 2 × 2 factorial design study for 4 periods with 6 wk/period. The 4 treatment diets consisted of grass silage and 2 levels of concentrate (30 and 60% dry matter basis), with or without yeast supplement. At the end of each period, CH₄ emissions were measured simultaneously using the SF₆ and respiration chamber techniques when cows were housed in chambers. The SF₆ technique was also used when cows were housed in digestibility units (barn location) before and after respiratory chamber measurements (chamber location). The simultaneous measurements in chamber location revealed that CH₄ emission estimates by the SF₆ technique were similar to those by the respiration chamber technique in the first 3 periods, although the SF₆ estimates were significantly higher in period 4. The regression of all data from the 4 periods demonstrated a linear relationship between the SF₆ and respiration chamber measurements for total CH₄ emissions (g/d, R² = 0.69) and for CH₄ emissions per unit of milk yield (g/kg, R² = 0.88), and a quadratic relationship for CH₄ emissions per unit of dry matter intake (g/kg, R² = 0.64). The CH₄ emissions from the rectum were calculated as the difference between CH₄ estimates from the SF₆ technique when cows were housed in respiratory chambers and barn locations, which was 3% of the total CH₄ emissions from the mouth, nostrils, and rectum. The SF₆ estimates in the chamber location accounted for all sources of emissions, whereas those in the barn location, like that in grazing conditions, did not include CH₄ emission from the rectum. Therefore, the SF₆ measurements for grazing cattle should be adjusted for CH₄ emissions from the rectum (3% of total). We conclude that the SF₆ technique is reasonably accurate for estimating CH₄ emissions.     

Dietary Fiber in Processed Lentils

Effect of soaking (distilled water, 0.1% citric acid (CA) and 0.07% sodium bicarbonate (SB) solutions), and cooking (distilled water) was studied on dietary fiber components of lentils. A high increase of protopectin, total pectic substances (PS), and dietary fiber (DF) was observed in soaked lentils (dry matter basis). Soaking in CA and in SB solutions led to an appreciable increase of hemicellulose (HMC) and neutral detergent fiber, but not in lentils soaked in water. Cooking the previously soaked lentils, reduced the amount of DF, due to a drastic loss of HMC, although cellulose and lignin increased. PS content of cooked lentils, previously soaked in CA and SB was still higher than in raw lentil.