A general steady state mathematical model for fin-and-tube heat exchanger based on graph theory

Fin-and-tube heat exchangers are widely used in air conditioners, chillers, etc. A lot of factors, including arrangement of refrigerant circuits, configure specification of fins and tubes, and operating conditions, have significant influence on the performance of fin-and-tube heat exchangers. For the purpose of fast design of high performance heat exchangers, a simulator reflecting the influence of these factors is necessary. In this paper, a general steady state mathematic model based on the graph theory is presented. With the help of the directed graph and graph-based traversal methods (Breadth-first search and Depth-first search), this model is capable to describe any flexible refrigerant circuit arrangement, and quantify the refrigerant distribution in the refrigerant circuit and heat conduction through fins. An alternative iteration method is also developed to solve the conservation equations, which can shorten the simulating time effectively. The model is verified with the experimental results, and the maximum error is within ±10.0%. A simulator based on this model has been used for designing practical fin-and-tube heat exchangers.     

Fabrication of low-loss and wide-bandwidth v.a.d. optical fibres at 1.3 ?m wavelength

A low-loss and wide-bandwidth optical fibre in the long-wavelength region has been fabricated by the v.a.d. method. Loss at 1.3 ?m is 0.98 dB/km and 6 dB down bandwidth is 1600 MHz km at 1.26 ?m.     

Fuzzy conditional inference under max-⊙ composition

This paper shows that the majority of fuzzy inference methods for a fuzzy conditional proposition “If x is A then y is B,” with A and B fuzzy concepts, can infer very reasonable consequences which fit our intuition with respect to several criteria such as modus ponens and modus tollens, if a new composition called “max-⊙ composition” is used in the compositional rule of inference, though reasonable consequences cannot always be obtained when using the max-min composition, which is used usually in the compositional rule of inference. Furthermore, it is shown that a syllogism holds for the majority of the methods under the max-⊙ composition, though they do not always satisfy the syllogism under the max-min composition.     

Three-Dimensional Numerical Simulation of Helically Propagating Combustion Waves

In the present paper, by using a mathematical model for self-propagating high-temperature synthesis, we reveal the three-dimensional structure of so-called spin combustion wave on the inside of cylindrical sample. It is shown that an isothermal surface of regular spin combustion wave has some wings of which number is the same as that of reaction spots on the cylindrical surface and that the isothermal surface with helical wings rotates down with time. Because of this propagating pattern, in this paper, we adopt the more suitable term helical wave. We also obtain the following existence conditions of a helical wave: If physical parameters are set so that a pulsating wave exists stably for the one-dimensional problem, then a helical wave takes the place of a pulsating wave when the radius of cylindrical sample becomes large.     

Preparation of HPLC test solutions for organic impurities in aluminum lakes of food red no. 40 (allura red AC) and food yellow no. 5 (sunset yellow FCF)

The HPLC determination of organic impurities in Food Red No. 40 aluminum lakes (R-40Als) as directed by Japan's Specifications and Standards for Food Additives, 7th Ed. (JSFA-VII), has problems, such as reproducibility and low recovery. ICP analyses suggested that the problem was caused by the aluminum in the test solution. In the improved method for preparation of the test solution, aluminum was precipitated as a hydroxide gel by boiling with 1% aqueous ammonia. After centrifugation, the supernatant was used for the HPLC analysis of the organic impurities in the lakes. Recoveries of organic impurities were more than 85% from R-40Al spiked at the 0.1 and 1.0% levels of R-40. The proposed method was also adapted for Food Yellow No. 5 aluminum lakes.     

Multirate Sampling Method for Acceleration Control System

This paper focuses on the realization of high-performance motion control based on acceleration control. A disturbance observer is used to construct an acceleration control system. A high sampling frequency is known to be effective for improving the performance. Characteristics of acceleration control are investigated to discuss the relationship between the performance and a sampling frequency of the system. The needs for a high sampling frequency for an output are then described. Based on these considerations, a novel multirate sampling method for the acceleration control system is proposed. An output sampling period is set shorter than an input sampling period, and control calculation is executed at each output sampling period in the method. The disturbance observer is redesigned for application to the multirate system. Stability analysis is performed to verify the validity of the proposal. Feasibility of the proposed method and its influence on the performance are also verified by experimental results     

Optical Burst Switching Router With 40-,10-Gb/s Bit-Rate Transparent Contention Resolution

We report a bit-rate transparent optical burst switching (OBS) router prototype using a fast 5 times 5 PLZT [(Pb,La)(Zr,Ti)O₃ ] optical matrix switch. Dynamic switching in a two-wavelength, 2 times 2 OBS switch is demonstrated. Contention resolution using a tunable Mach-Zehnder interferometer wavelength converter for both 40- and 10-Gb/s bursts is demonstrated for the first time. Error-free operation was achieved for both bit rates under the same settings, as required in autonomous networks     

Electromyographic prosthetic hand using grasping-force-magnification mechanism with five independently driven fingers

This paper proposes an electromyographic (EMG) prosthetic hand that has five independently driven fingers, a flexion drive, and a force-magnification drive. The flexion drive allows for rapid finger motion, and the force-magnification drive allows for a firm grasp. To realize the natural feeling of control similar to that of movements with nonamputated parts, the control system includes the impedance model of human forearms and utilizes the muscle contraction level extracted from a user’s EMG signals. We experimentally verified that the maximum fingertip force of the hand exceeds 20 N, and the time required to fully close the hand by the flexion drive is 0.53 s. We also experimentally verified that in response to EMG signals, the fingers can flex smoothly and the grasping force can be modulated. Furthermore, we show that taking EMG signals as inputs makes it possible to control six operations, including ones that use the five fingers in distinctive ways.     

Design principle of micromechanical probe with an electrostatic actuator for friction force microscopy

It is important to understand friction force in micro/nano mechanical devices both at high sliding speed and with high lateral resolution. Dual-axis friction force microscopes that can provide high lateral resolution and accuracy have been proposed; however, the sliding speed is limited by the probe scan speed. While a micro mechanical probe (MMP) with an electrostatic actuator can overcome this problem, details of probe design have not been established yet. This paper presents the principle of the mechanical design for an MMP with high force sensitivity and sufficient drive force. The dimensions of the double cantilever beam control the spring constants, resonant frequencies, and drive force. The use of an actuated MMP enables accurate friction force microscopy at high sliding speeds, which is required for the design of micro/nano mechanical devices.