Reliability Modeling and Analysis of Communication Networks with Dependent Failures

This paper presents a new model to study the reliability of communication networks in which link failures are statistically dependent. The approach tries to identify and model explicitly the events that cause communication link failures. No conditional probabilities are needed, and so two major difficulties inherent to them, namely, an exponential number of conditional probabilities to deal with and a consistency requirement to satisfy, are avoided. For reliability computations, some existing algorithms for finding network reliability can be used with minor modifications and no significant increase in computational complexity.     

Protocol design for scalable and reliable group rekeying

We present the design and specification of a protocol for scalable and reliable group rekeying together with performance evaluation results. The protocol is based upon the use of key trees for secure groups and periodic batch rekeying. At the beginning of each rekey interval, the key server sends a rekey message to all users consisting of encrypted new keys (encryptions, in short) carried in a sequence of packets. We present a scheme for identifying keys, encryptions, and users, and a key assignment algorithm that ensures that the encryptions needed by a user are in the same packet. Our protocol provides reliable delivery of new keys to all users eventually. It also attempts to deliver new keys to all users with a high probability by the end of the rekey interval. For each rekey message, the protocol runs in two steps: a multicast step followed by a unicast step. Proactive forward error correction (FEC) multicast is used to reduce delivery latency. Our experiments show that a small FEC block size can be used to reduce encoding time at the server without increasing server bandwidth overhead. Early transition to unicast, after at most two multicast rounds, further reduces the worst-case delivery latency as well as user bandwidth requirement. The key server adaptively adjusts the proactivity factor based upon past feedback information; our experiments show that the number of NACKs after a multicast round can be effectively controlled around a target number. Throughout the protocol design, we strive to minimize processing and bandwidth requirements for both the key server and users.     

Mesoscale simulation of block copolymers in aqueous solution: parameterisation, micelle growth kinetics and the effect of temperature and concentration morphology

In this work, we utilise ‘MesoDyn’ [J Chem Phys 99 (1993) 9202; 106 (1997) 4260] density functional simulations to study the effect of temperature and concentration on the micellar morphology of polymeric surfactants. Parameterisation strategies based upon atomistic models and experimental data are discussed. Taking the temperature dependence of interaction energy into account, the change in morphology of Pluronic (PEO-PPO-PEO) block copolymer structure with temperature is well reproduced. As a function of concentration, the diameter of spherical micelles is found to increase in line with previous cryo-TEM observations [Phys Chem Chem Phys 1 (1999) 3331]. Simulations of high concentration PEO-PBO diblock systems show ordering similar to the face-centered cubic structures found experimentally [J Polym Sci B 33 (1995) 1085; Macromolecules 30 (1997) 5721; Polymer 39 (1998) 4891; Phys Chem Chem Phys 1 (1999) 2773].     

(BETS)2[RuX5NO] (X = Cl, Br): An Explanation of Different Conductive Properties Through Structural and Spectroscopic Studies

For the development of new crystal and electronic structures in molecular conductors, dimeric tetrathiafulvalene (TTF) and tetraselenafulvalenes (TSFs)1–3 linked by single or double methyl antimony bridge(s) have been prepared and their neutral crystal structures have been investigated. The donor2 (cis-2) forms a metallic cation radical salt with tetracyanoquinodimethane (TCNQ) containing one-dimensional array interactions.     

An analysis of lighting energy savings and switching frequency for a daylit corridor under various indoor design illuminance levels

Visual comfort and electric lighting energy issues are essential criteria to justify daylighting schemes. The evaluation of energy efficiency due to daylight linked lighting control systems is best demonstrated by case studies. This paper presents field measurements on daylighting for a fully air-conditioned daylit corridor. Artificial lighting load, brightness of the fluorescent luminaires, daylight availability for various switching illuminance levels were systematically recorded and analyzed. The general features and characteristics of the findings including the number of switching operations and electric-lighting energy savings are presented and discussed. Daylighting theories, using cumulative frequency distribution of outdoor illuminance and regression models based on brightness of light output, outdoor illuminance and electric light power to estimate daylight-linked lighting control savings, have been developed and assessed. It has been found that data from both approaches show reasonably good agreements with measured results. The findings from this study provide some operational and energy information, which would be useful and applicable to other interior spaces with similar architectural designs.     

Scattering of waves by flaws in anisotropic laminated plates

The strip element method (SEM) is used to investigate wave scattering by rectangular flaws in anisotropic laminated plates. The plates containing flaws are divided by junctions into domains in which the SEM is applied. For each domain, SEM equations are obtained which give a relationship between the traction and displacement vector on the vertical boundaries. A set of equations which gives a relationship between the traction and displacement vector on the junctions is then obtained by assembling the SEM equations for all the domains. This set of equations is solved by using the conditions on the junctions. Scattered wave fields in the frequency domain for isotropic and composite plates with rectangular flaws are computed and discussed in comparison with results for corresponding plates without flaws. A technique for determining the length of a rectangular flaw in a plate is also presented. The results presented in this paper are of importance and could be used in the characterization of flaws in anisotropic laminated plates.     

Microstructure and mechanical properties relations for green bodies compacted from spray dried granules

Alumina granules from three binder systems were spray dried and pressed into bars at varied pressure. Granules are classified as strong, medium and weak as to reflect the different amount of poly(vinyl-butyral) binder and liquid paraffin plasticizer used in the binder system. Mechanical properties of the pressed bars were obtained from a four-point bend test and microstructures were examined using scanning electron microscopy SEM. Strengths and fracture toughnesses are found to increase as a function of compaction pressure, while the calculated effective flaw size is independent of the compaction pressure for all three granule types. Microstructural examination of fracture surfaces revealed that samples compacted at high pressure exhibited more transgranular fracture than samples compacted at low pressure. Evidently, higher pressure had increased the intergranular fracture resistance which correspondingly increased the fracture toughness of the pressed bars. For bars pressed from granules, green body strengths and toughnesses are strongly dependent on the cohesion between pressed granules and not on the effective processing flaw size.     

The effect of Pseudomonas aeruginosa infection on clinical parameters in steady-state bronchiectasis

STUDY OBJECTIVE: To investigate the effect of Pseudomonas aeruginosa infection on clinical parameters in Chinese patients with noncystic fibrosis and steady-state bronchiectasis. DESIGN: Prospective, cross-sectional clinicomicrobiological study with informed consent. SETTING: Consecutive outpatient recruitment from a specialist bronchiectasis respiratory clinic. PATIENTS: Outpatients (n = 100; 62 women; 55.1+/-16.7 years old; FEV1/FVC 1.4+/-0.7/2.1+/-0.9 L), who had stable respiratory symptoms for more than 3 weeks. MEASUREMENTS AND RESULTS: Respiratory pathogens isolated from the sputum were: Pseudomonas aeruginosa (33), Haemophilus influenzae (10), Moraxella catarrhalis (2), other Gram-negative bacilli (5), Streptococcus pneumoniae (6), Staphylococcus aureus (5), mycobacteria (3), and yeast (1). Clinical parameters in patients with positive isolation of P aeruginosa were compared with those without the organism in the sputum culture (non-P aeruginosa). In the P aeruginosa group, the FEV1/FVC ratio and sputum volume were lower (p < 0.005) and higher (p < 0.0001), respectively, than those of the non-P aeruginosa group. The FEV1/FVC ratio (< 60%) and sputum volume (grading > 5) were independently associated with a positive sputum isolation of P aeruginosa with odds ratios of 3.1 (confidence interval [CI] 1.2 to 8.4; p < 0.01) and 4.7 (CI 1.6 to 13.3; p < 0.001), respectively. CONCLUSIONS: P aeruginosa is the predominant respiratory pathogen isolated in the sputum of Chinese patients with steady-state bronchiectasis, and its isolation is associated with high sputum output (> or = 75th quartile) and moderately severe airflow obstruction (FEV1/FVC < 60%).