A facile antistatic modification of polyester fiber based on ion-exchange reaction of sulfonate-modified polyester and various cationic surfactants

A new technique for imparting antistatic properties to poly(ethylene terephthalate) (PET) fiber has been developed. In this technique, blend polyester fibers containing poly(ethylene terephthalate/5-sulfoisophthalate) (SIP-PET) were prepared by blend spinning and then treated with various cationic surfactants in the process of dyeing. The surfactants could effectively be immobilized on the fiber as the counter cations of the sulfonate groups of the 5-sulfoisophthalate (SIP) units and aid the release of static electrons formed in the fiber. Thus, the half-life time (t_1/2) of leakage of static charge and the surface resistivity (Rs) of the blend PET fibers became much lower after treating. The best result was obtained with a methylated quaternary ammonium salt of a stearylamine-ethylene oxide (EO) adduct or hydrochloride of a laurylamine-EO adduct as the surfactant of which the number of EO units was around ten. Even after five washing cycles the t_1/2 value of the fibers treated with these surfactants was kept lower than 30 s with the Rs value maintained in the order of 10¹³ Ω cm^-2. Therefore, the present technique could be useful for practical production of polyester fibers with “semi-permanent” antistatic properties which can be recovered by re-treatment even if they were lost.     

Microstructure development of steel during severe plastic deformation

The microstructure development during plastic deformation was reviewed for iron and steel which were subjected to cold rolling or mechanical milling (MM) treatment, and the change in strengthening mechanism caused by the severe plastic deformation (SPD) was also discussed in terms of ultra grain refinement behavior. The microstructure of cold-rolled iron is characterized by a typical dislocation cell structure, where the strength can be explained by dislocation strengthening. It was confirmed that the increase in dislocation density by cold working is limited at 10¹⁶m⁻², which means the maximum hardness obtained by dislocation strengthening is HV3.7 GPa. However, the iron is abnormally work-hardened over the maximum dislocation strengthening by SPD of MM because of the ultra grain refinement caused by the SPD. In addition, impurity of carbon plays an important role in such grain refinement: the carbon addition leads to the formation of nano-crystallized structure in iron.     

Difference between mechanical alloying and mechanical disordering in the amorphization reaction of Al50Ta50 in a rod mill

Amorphous Al₅₀Ta₆₀ alloy powders have been synthesized by mechanical alloying (MA) from elemental powders of aluminium and tantalum, and mechanical disordering (MD) from crystalline intermetallic compound powders of AlTa respectively using the rod milling technique. The mechanically alloyed and the mechanically disordered alloy powders were characterized by X-ray diffraction, scanning electron microscopy, electron probe microanalysis, transmission electron microscopy, differential thermal analysis, differential scanning calorimetry and chemical analysis. The results have shown that the crystal-to amorphous transformation in the MD process occurs through one stage, while the crystallineto-amorphous formation in the MA process occurs through three stages. At the early and intermediate stages of the MA time, heating the alloy powders to 700 K leads to the formation of an amorphous phase by a solid-state amorphizing reaction. At the final stage of the MA time, the amorphous phase is crystallized through a single sharp exothermic peak. Contrary to this, amorphous alloy powders produced by MD are crystallized through two broad exothermic peaks.     

Expectation-maximization algorithms for inference in Dirichlet processes mixture

Mixture models are ubiquitous in applied science. In many real-world applications, the number of mixture components needs to be estimated from the data. A popular approach consists of using information criteria to perform model selection. Another approach which has become very popular over the past few years consists of using Dirichlet processes mixture (DPM) models. Both approaches are computationally intensive. The use of information criteria requires computing the maximum likelihood parameter estimates for each candidate model whereas DPM are usually trained using Markov chain Monte Carlo (MCMC) or variational Bayes (VB) methods. We propose here original batch and recursive expectation-maximization algorithms to estimate the parameters of DPM. The performance of our algorithms is demonstrated on several applications including image segmentation and image classification tasks. Our algorithms are computationally much more efficient than MCMC and VB and outperform VB on an example.     

A new optical elasticity resin for mobile LCD modules

Abstract— The display used in current cell phones has an air gap between the cover glass and the liquid‐crystal‐display (LCD) module to prevent the LCD glass from being damaged. Reflections at the boundaries of the air gap cause a reduction in the LCD luminance and contrast. To address this problem, a newly proposed LCD structure has been investigated. The “Super View Resin (SVR),” a transparent elastic resin which improves the shock resistance and visibility of the LCD, has been developed. Filling the air gap between the cover glass and LCD module with a refractive‐index‐matching resin solves the light‐reflection problem inherent in the use of a reinforced cover‐glass lens. Moreover, the elastic filler works as a damper, reducing any external shock, which prevents not only the cover glass and LCD module from being damaged, but also the glass from being shattered when it is broken.     

Magnetic order and evolution of the electronic state aroundx=0.12 in La2?xBaxCuO4 and La2?xSrxCuO4

Muon spin rotation ( ⁺SR) measurement provides clear evidence of the antiferromagnetic order of Cu moments below 35 K for La_2–x Ba _x CuO₄ and below 15 K for La_2–x Sr _x CuO₄ in the narrow range ofx where the high-T _c superconductivity (SC) is suppressed remarkably. The results suggest that the change of the electronic state coupled with the lattice instability is relevant to the local suppression of SC and freezing of spin fluctuations of the Cu moment.     

Disposition of diadenosine 5',5"'-P1,P4-tetraphosphate (Ap4A) in rats

The disposition of diadenosine 5'5"'-P1,P4-tetraphosphate (Ap4A), an endogenous dinucleotide, was investigated in rats. The degradation of Ap4A in rat plasma was very rapid and could be explained by a Michaelis-Menten equation: Km and Vmax values were 1.69 micrograms/ml and 4.32 micrograms/min/ml, respectively. Ap4A was degraded in rat plasma to ATP and AMP, but not to 2 ADP molecules, and these nucleotides were further degraded through adenosine. The degradations kinetics were examined. After intravenous bolus injection, Ap4A in plasma declined rapidly and the rate of elimination was dose-dependent: the biological half-life was about 3s at the dose of 1 mg/kg and was longer at 3 mg/kg. When Ap4A was administered by intravenous infusion (0.5 or 1.0 mg/kg/min), the plasma level rapidly reached a steady-state, which then rapidly declined after stopping the infusion.     

Gap symmetry and intrinsic intraplane pinning of untwinned YBa2Cu3O7 single crystals

The interplane (cb) and intraplane (ab) anisotropy of untwinned YBa₂ Cu₃0₇ single crystals has been investigated by means of the torque magnetometry. To extract the reversible and irreversible components, the torque was measured as a function of increasing angle as well as decreasing angle. The interplane irreversible torque _irr shows two-fold peaks at _c =90 ° and270 ° (of half width11 ° at77 K) due to the well-known intrinsic interplane pinning. A novel intrinsic pinning has been discovered in the intraplane irreversible torque, i.e., _irr shows four-fold peaks of half width20° at77 K when _a =0 °, 90 °, 180 ° and270 °. We argue that the intrinsic intraplane pinning comes from the four-fold nature of the gap parameter.     

Fabrication of high hardness Ni mold with electroless nickel–boron thin layer

The nickel electroforming method using a high-concentration nickel sulfamate bath is commonly used to fabricate micro metal molds in the LIGA process; however, this method does not produce micro metal molds of sufficient hardness. One means of improving the hardness of micro metal molds made using the nickel electroforming method is to include additives in the nickel plating solution. Another method is nickel alloy plating or a similar technique. In this research, we used a nickel–boron (Ni–B) electroless alloy plating method to obtain a hard nickel plated film having hardness of 832 Hv. It was also ascertained that Ni–B electroless alloy plated film retains its high hardness even during heat treatment in conditions of 250°C for 1 h. To deal with the high stresses developed in high-hardness plated films, we proposed double-layer nickel electroforming. This method is covered and used on conventional nickel electroforming layer by high hardness micro mold. High hardness micro metal mold using double-layer was fabricated by nickel electroforming and Ni–B electroless alloy plating method.