Performance of a solid oxide fuel cell couple operated via in situ catalytic partial oxidation of n-butane

The operation of a pair of anode-to-anode-facing solid oxide fuel cells (SOFCs) via in situ catalytic partial oxidation (CPO) of n-butane was investigated. In this simple “no-chamber” setup, butane is partially oxidized by heterogeneous reactions inside the porous anodes, providing processed fuel and the heat required for SOFC operation. The cell couple yielded a power density of up to 270 mW cm⁻², and the maximum total power obtained was 1.2 W with cell sizes of 13 mm × 23 mm. The maximum electrical efficiency was 1.3%. High CO concentrations of up to 1000 ppm were detected in the exhaust gas, indicating that the cell couple could not efficiently consume the complete provided fuel. A flame, lit at the exhaust, minimized the carbon monoxide level while having insignificant influence on the cell performance. Thermal insulation of the cell couple improved the output remarkably, showing the strong influence of temperature on cell performance. The two cells had a distance of only 2 mm, suggesting a potential for high volumetric power densities in multi-cell configurations for a self-sustained combined heat and power system.     

Input system for part model in CAD from coloured hand-written illustration with use of ITV

An input system for CAD is developed to construct a part model within a computer from a hand-written sketch. The sketch is drawn based on the technical illustration method. The shape of the input part is constructed by the combination of cuboids and cylinders at present. A coloured illustration is adopted for the ease of the shape recognition and for the input of the technological information.

The illustration is fed into the computer via a black and white ITV. Colours are identified referring to the brightness of the input image. The constitutive bodies, the geometric element with the technological information and the content of the technological information are recognized through image processing such as noise filtering, thinning of the contours, detection of lines and so on. The input system outputs a set of commands to the modelling system. The integrated part model which includes not only the geometrical information but also the technological information of the part is constructed by the connected modelling system CIMS/MODE.

The combination of the input system and the modelling system can support the designer to construct the detailed part model within the computer effectively. It is expected to extend the ability of the input system to identify general hand-written illustrations so that the input method will be more practical and useful.     

Experimental exploration of discrepancies in F-number correlation of flammability limits

Flammability limits measurement has been made by ASHRAE method for some 20 kinds of combustible gases and vapors. These compounds have been selected mainly because the literature values of flammability limits are not consistent with the F-number calculated ones [J. Hazard. Mater. A 82 (2001) 113]. As a result, it has been found that the newly obtained values of flammable range are classified into three groups. For the first group of compounds, the present values agree well to the literature values. For the second group, the present values do not agree to the literature values but agree with the calculated ones. For the third group ones, the present values neither agree to the literature values nor to the calculated ones. There are 4, 13, and 6 compounds in the respective groups.     

Microassembly of semiconductor three-dimensional photonic crystals

Electronic devices and their highly integrated components formed from semiconductor crystals contain complex three-dimensional (3D) arrangements of elements and wiring. Photonic crystals, being analogous to semiconductor crystals, are expected to require a 3D structure to form successful optoelectronic devices. Here, we report a novel fabrication technology for a semiconductor 3D photonic crystal by uniting integrated circuit processing technology with micromanipulation. Four- to twenty-layered (five periods) crystals, including one with a controlled defect, for infrared wavelengths of 3-4.5 microm, were integrated at predetermined positions on a chip (structural error <50 nm). Numerical calculations revealed that a transmission peak observed at the upper frequency edge of the bandgap originated from the excitation of a resonant guided mode in the defective layers. Despite their importance, detailed discussions on the defective modes of 3D photonic crystals for such short wavelengths have not been reported before. This technology offers great potential for the production of optical wavelength photonic crystal devices.     

A self-organizing map with twin units capable of describing a nonlinear input-output relation applied to speech code vector mapping

This paper describes a new type of self-organizing map (SOM) with twin units as opposed to the single unit type conventional SOM proposed by Kohonen. The present self-organizing map with twin units (TW-SOM) can describe a nonlinear input-output relation with high accuracy. It is applied to voice conversion problem from bone conduction voice to air conduction voice (nonlinear code vector mapping), and its superiority over the conventional method using Linde-Buzo-Gray (LBG) algorithm is discussed. The tone quality of the converted voice is examined not only from the quantization distortion viewpoint, but also from the auditory sensation viewpoint through actual listening tests. The enhancement of the tone quality was experimentally confirmed.     

Visualization of Bubble Nucleation in Boiling 3He

The heat transfer properties of ³He bubbles in the nucleate boiling state have been investigated in liquid ³He below 1.0 K by using the shadowgraph method. The temperature difference between the copper surface and liquid ³He temperature was also measured as a function of heat flux in steady state. The size and number of bubbles departing from the surface in a specific time were compared using photograph recorded by a high-speed video camera at various heat flux and liquid ³He temperature of 0.5, 0.7 and 1.0 K.     

INTERACTIVE FUZZY PROGRAMMING BASED ON FRACTILE CRITERION OPTIMIZATION MODEL FOR TWO-LEVEL STOCHASTIC LINEAR PROGRAMMING PROBLEMS

In this article, we focus on two-level linear programming problems involving random variable coefficients in objective functions and constraints. Following the concept of chance constrained programming, the two-level stochastic linear programming problems are transformed into deterministic ones based on the fractile criterion optimization model. After introducing fuzzy goals for objective functions, interactive fuzzy programming to derive a satisfactory solution for decision makers is presented as a fusion of a stochastic approach and a fuzzy one. An illustrative numerical example is provided to demonstrate the feasibility of the proposed method.     

Application of induction motor speed sensorless vector control to railway vehicle traction

Pulse generators (PGs) are equipped to detect the rotor frequency of induction traction motors for torque control in railway vehicle traction field. Eliminating PGs is preferable from the viewpoints of increasing the reliability of the traction system, reduction of both the initial and maintenance cost, and downsizing induction traction motors. Expecting those advantages, we have been studying the application of a sensorless control method to induction traction motor control. Prior to some reports of studies and tests to apply speed sensorless strategy to railway vehicle traction we launched ideas to apply the speed sensorless control strategy and results of the studies and tests. In this paper, we present the novel control method for railway vehicle traction and some results of theoretical study and tests. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 161(2): 69–77, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20273     

Screening of patients with maternally transmitted diabetes for mitochondrial gene mutations in the tRNA[Leu(UUR)] region

To investigate the prevalence and clinical characteristics of diabetes mellitus caused by mitochondrial gene mutations in the tRNA[Leu(UUR)] region, a known 'hot spot' for pathogenic mutations, we screened 440 diabetic patients with diabetic mothers for 11 mitochondrial gene mutations reported in mitochondrial neuromuscular disorders; nucleotide pairs (np) 3250, 3251, 3252, 3254, 3256, 3260, 3271, 3291, 3302 and 3303 in addition to an A to G transition at np 3243. The dot-blot hybridization method using 32P-labelled sequence-specific oligonucleotides as probes was used. One subject carrying a T to C transition at np 3271 and seven carrying the A to G transition at np 3243 were identified, while none of the other diabetic patients screened had these mutations in the tRNA[Leu(UUR)] region. The patient with the 3271 mutation, a 39-year-old male, had excellent glycaemic control with diet alone and had neither hearing impairment nor symptoms suggesting mitochondrial myopathy, encephalopathy, lactic acidosis and stroke-like episodes (MELAS). Thus, among patients with maternally transmitted diabetes, the prevalence of the 3271 mutation was approximately one-seventh that of the 3243 mutation, and other mutations are even more rare in the mitochondrial tRNA[Leu(UUR)] region.