Sintering Behavior of Cadmium-Doped Pb(Ni1/3Nb2/3)O3–PbZrO3–PbTiO3 Ceramics

Substituting Cd²⁺ ions into the A and B sites in a Pb(Ni_1/3Nb_2/3)O₃PbZrO₃PbTiO₃ (PNNPZPT) ternary perovskite material made it possible to determine the effects of the Cd²⁺ ion substitution site on sintering behavior. The substitution site of the Cd²⁺ ion was identified by using X-ray photoelectron spectroscopy spectra. Although Cd²⁺ ions were substituted into the A and B sites in PNNPZPT, the Cd²⁺ ions preferred the A site over the B site. When Cd²⁺ ions replaced Pb²⁺ ions, a weight gain was observed during sintering. On the other hand, replacing Ni2 ions with Cd²⁺ ions promoted weight loss. Those weight changes indicated that Cd²⁺ ions change the bonding strength between the B-site cations and the oxygen of the octahedron in a perovskite structure. Density was influenced by the Cd²⁺ ion substitution site, and the A-site-doped compositions had higher densities than the B-site-doped compositions.     

Effect of reactive diluents on properties of unsaturated polyester/montmorillonite nanocomposites

Unsaturated polyester (UP)/montmorillonite (MMT) nanocomposite was prepared by using hydroxypropylacrylate (HPA) as a reactive diluent instead of conventional styrene monomer and the effect of polarity of reactive diluent on properties of nanocomposite was investigated. X‐ray and mechanical test data indicated that mixing for an extended period of time is essential to enhance the physical properties of nanocomposites in the UP/Cloisite 6A system. This was attributed to the high polarity of HPA that may disturb the preintercalation of UP resin into the galleries of MMT. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 238–242, 2004     

Tensile properties of hollow glass bead‐filled polypropylene composites

The tensile properties of polypropylene (PP) filled with hollow glass beads have been measured at room temperature to identify the effects of the particle contents, size and its distribution on them in the present article. The mean diameters of the fillers were 11, 35, and 70 μm, and they were named as TK10, TK35, and TK70 respectively. The surface of these particles was pretreated with silane coupling agent. The results showed that the yield stress (σ_y) decreased gently for PP/TK70 systems, whereas decreased relatively obviously for PP/TK35 systems with increasing the volume fraction (?_f) of the fillers. When ?_f was less than 5%, the tensile strength at break (σ_b) of the composites increased with the increase of ?_f. When ?_f was more than 5%, σ_b was almost a constant for PP/TK70 systems, while σ_b decreased linearly for PP/TK35 systems. The tensile fracture strain (ε_b) of the composites decreased suddenly when ?_f was less than 5%, and then decreased slightly with increasing ?_f. When ?_f was 10%, σ_y and σ_b increased while ε_b decreased with the increase of the bead diameter. Furthermore, the σ_y was predicted by means an equation proposed in the previous work, and good interfacial adhesion was shown between the hollow glass beads and the matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1697–1701, 2007     

ShapeSynth: Parameterizing model collections for coupled shape exploration and synthesis

Recent advances in modeling tools enable non‐expert users to synthesize novel shapes by assembling parts extracted from model databases. A major challenge for these tools is to provide users with relevant parts, which is especially difficult for large repositories with significant geometric variations. In this paper we analyze unorganized collections of 3D models to facilitate explorative shape synthesis by providing high‐level feedback of possible synthesizable shapes. By jointly analyzing arrangements and shapes of parts across models, we hierarchically embed the models into low‐dimensional spaces. The user can then use the parameterization to explore the existing models by clicking in different areas or by selecting groups to zoom on specific shape clusters. More importantly, any point in the embedded space can be lifted to an arrangement of parts to provide an abstracted view of possible shape variations. The abstraction can further be realized by appropriately deforming parts from neighboring models to produce synthesized geometry. Our experiments show that users can rapidly generate plausible and diverse shapes using our system, which also performs favorably with respect to previous modeling tools.     

Illuminant Aware Gamut‐Based Color Transfer

This paper proposes a new approach for color transfer between two images. Our method is unique in its consideration of the scene illumination and the constraint that the mapped image must be within the color gamut of the target image. Specifically, our approach first performs a white‐balance step on both images to remove color casts caused by different illuminations in the source and target image. We then align each image to share the same ‘white axis’ and perform a gradient preserving histogram matching technique along this axis to match the tone distribution between the two images. We show that this illuminant‐aware strategy gives a better result than directly working with the original source and target image's luminance channel as done by many previous methods. Afterwards, our method performs a full gamut‐based mapping technique rather than processing each channel separately. This guarantees that the colors of our transferred image lie within the target gamut. Our experimental results show that this combined illuminant‐aware and gamut‐based strategy produces more compelling results than previous methods. We detail our approach and demonstrate its effectiveness on a number of examples.     

Single‐shot High Dynamic Range Imaging Using Coded Electronic Shutter

Typical high dynamic range (HDR) imaging approaches based on multiple images have difficulties in handling moving objects and camera shakes, suffering from the ghosting effect and the loss of sharpness in the output HDR image. While there exist a variety of solutions for resolving such limitations, most of the existing algorithms are susceptible to complex motions, saturation, and occlusions. In this paper, we propose an HDR imaging approach using the coded electronic shutter which can capture a scene with row‐wise varying exposures in a single image. Our approach enables a direct extension of the dynamic range of the captured image without using multiple images, by photometrically calibrating rows with different exposures. Due to the concurrent capture of multiple exposures, misalignments of moving objects are naturally avoided with significant reduction in the ghosting effect. To handle the issues with under‐/over‐exposure, noise, and blurs, we present a coherent HDR imaging process where the problems are resolved one by one at each step. Experimental results with real photographs, captured using a coded electronic shutter, demonstrate that our method produces a high quality HDR images without the ghosting and blur artifacts.     

Structure Aware Visual Cryptography

Visual cryptography is an encryption technique that hides a secret image by distributing it between some shared images made up of seemingly random black‐and‐white pixels. Extended visual cryptography (EVC) goes further in that the shared images instead represent meaningful binary pictures. The original approach to EVC suffered from low contrast, so later papers considered how to improve the visual quality of the results by enhancing contrast of the shared images. This work further improves the appearance of the shared images by preserving edge structures within them using a framework of dithering followed by a detail recovery operation. We are also careful to suppress noise in smooth areas.     

Process development for the removal of copper from wastewater using ferric/limestone treatment

The removal of copper from wastewater by ferric/limestone coagulation followed by screen filtration was carried out at a laboratory scale. The optimum coagulant (FeCl₃) dose and working pH were 50 mg// of Fe(m) and pH 7.5, respectively, through jar tests. For the efficient removal of copper from wastewater, we developed a novel process including the co-precipitation of copper with FeCl₃, alkalization in a limestone aeration bed, and separation of precipitates in a sedimentation tank coupled with internal stainless steel screen filter. The performance results showed that removal of copper from the solution was over 99.5%. The pH was effectively maintained over 7.5 in limestone bed during the whole process. Ferric hydroxide/copper aggregates were removed over 99% by stainless steel screen filter of 1,450 mesh. Periodic air backwashing alleviated fouling of the filter surface.     

Microstructure and Phase Stability of Yttria-Doped Tetragonal Zirconia Polycrystals Heat Treated in Nitrogen Atmosphere

The low-temperature degradation of zirconia (ZrO₂) that was doped with 3 mol% yttria (Y₂O₃) (3Y-TZP) was prevented by the heat treatment of sintered specimens in nitrogen. The heat treatment of sintered specimens resulted in a surface layer that was stabilized by nitrogen ions, whereas the interior was only slightly affected by the heat treatment. X-ray diffractometry and transmission electron microscopy analyses revealed that the stabilized surface layer consisted of cubic grains with tetragonal precipitates. Although the presence of the surface layer decreased the strength of the sintered 3Y-TZP, the strength of nitrified specimens was maintained when low-temperature annealing was applied.     

Wetting properties of polystyrene ionomers treated with plasma source ion implantation

The wetting properties of polystyrene‐based ionomers treated with plasma source ion implantation (PSII) were investigated by the measurement of water contact angles. When sulfonated ionomers were aged for a few days, the hydrophobic recovery for the ionomers became much slower than that for the nonionic polymers. However, when the samples were aged over 20 days, the water contact angle of the ionomers converged with that of the nonionic polymer. Thus, it was concluded that the ionic interaction between the ionic groups and the presence of ionic groups together resulted in the slow hydrophobic recovery and that the aging effect was significant for the ionomers. For the methacrylate ionomer of low ion content, on the other hand, it was found that the PSII treatment produced only a small change in hydrophobic recovery behavior. Thus, it was suggested that the low ionic content coupled with the small size of the ionic unit might cause changes only of a very insignificant degree in hydrophobic recovery behavior. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2500–2504, 2002