Polylactide films formed by immersion precipitation: Effects of additives,nonsolvent, and temperature

The influence of nonsolvent, crystallinity of the polymer film, and addition of dodecane (a poor solvent for the polymer and for the nonsolvent) on the morphology of polylactides films has been investigated and was related to phase separation behavior. Both amorphous poly‐DL ‐lactide (PDLLA) and crystalline poly‐L ‐lactide (PLLA) were dissolved in dichloromethane, and subsequently films were made by immersion in nonsolvent baths. PDLLA gave dense films without any internal structure, since the structure was not solidified by crystallization or glassification. PLLA films show varying structure depending on the nonsolvent. With methanol, asymmetric morphologies were observed as a result from combined liquid‐liquid demixing and crystallization, while with water symmetric spherulitic structures were formed. As a next step, dodecane was added, which is not miscible with the nonsolvent, and we found it to have a strong influence on the morphology of the films. The PDLLA films with dodecane did not collapse: a closed cell structure was obtained. In PLLA films, dodecane speeds up phase separation and induces faster crystallization in the films, and the porosity, size of the pores, and interconnectivity increased. When the PLLA solutions were subjected to a heat pretreatment, crystallization could be postponed, which yielded a cellular structure around dodecane, which did not contain spherulites anymore. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 959–971, 2007     

Thermoelectric properties of SbNCa3 and BiNCa3 for thermoelectric devices and alternative energy applications

Thermoelectric properties of two antiperovskites SbNCa₃ and BiNCa₃ are calculated using first principles calculations. High values of Seebeck coefficients are observed for these materials. Electrical and thermal conductivities are also calculated. Increase in thermal conductivity and decrease in electrical conductivity are found with increasing temperature. The maximum values of thermal conductivity are 92×10¹⁴  W/m K s and 88×10¹⁴  W/m K s for SbNCa₃ and BiNCa₃ respectively at a temperature of 900 K. The peak values of 5×10²⁰/Ω m s and 5.2×10²⁰/Ω m s are achieved for n-type SbNCa₃ and BiNCa₃ respectively at a temperature of 300 K. Figure of merit is achieved for these materials at room temperature which shows that these materials can be useful for thermoelectric devices and alternative energy sources.     

Antimicrobial protection of cotton and cotton/polyester fabrics by radiation and thermal treatments. I. Effect of ZnO formulation on the mechanical and dyeing properties

Cotton and cotton/polyester fabrics were treated against microbial attack by applying a formulation based essentially on ZnO under high‐energy radiation and thermal curing. To achieve the homogeneity and the reactivity of the treating formulation, a binder (Impron MTP) and a dispersing agent (Setamol WS) were used with ZnO. The antimicrobial property of the fabrics was evaluated, in terms of mechanical properties, by a soil burial test. Moreover, the effect of antimicrobial finishing on the dyeing properties in terms of color strength was investigated. It was found that the best composition that affords the best antimicrobial protection to cotton fabrics contains 2% ZnO, 2% binder, and 1% dispersing agents. For the cotton/polyester blend, the best results were achieved at the same conditions except the ZnO was 1%. It was found that the treatment under the effect of electron‐beam irradiation is better than that of gamma irradiation and thermal curing. The results showed that when the finishing process was carried out before dyeing with a reactive dye, it affects the color strength rather than performing the finishing after the dyeing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1129–1137, 2003     

Bathymetry and siltation rate for Dokan Reservoir,Iraq

The Dokan Reservoir dam is a concrete cylindrical arch with gravity abutments, located on the Lesser Zab River about 60 km from the city of Sulaimani in north‐eastern Iraq. A bathymetric survey was conducted in November 2014 for a period of 10 days, using an echo sounder of 200‐kHz single beam. The survey results indicated an annual average sediment deposition of 3.8 million m³. Thirty‐two sediment samples were collected from the reservoir bed. The ratio of gravel, sand, silt and clay was 15:14:48:23, respectively. The reservoir bed is covered mainly with silt. The sediments are composed of silty clay (77.6%), silty sandy clay (10%), sandy gravely silty clay (1.2%) and gravely sandy silty clay (1%).     

Rubber‐toughened polypropylene nanocomposite: Effect of polyethylene octene copolymer on mechanical properties and phase morphology

Rubber‐toughened polypropylene (PP)/org‐Montmorillonite (org‐MMT) nanocomposite with polyethylene octene (POE) copolymer were compounded in a twin‐screw extruder at 230°C and injection‐molded. The POE used had 25 wt % 1‐octene content and the weight fraction of POE in the blend was varied in the range of 0–20 wt %. X‐ray diffraction analysis (XRD) revealed that an intercalation org‐MMT silicate layer structure was formed in rubber‐toughened polypropylene nanocomposites (RTPPNC). Izod impact measurements indicated that the addition of POE led to a significant improvement in the impact strength of the RTPPNC, from 6.2 kJ/m² in untoughened PP nanocomposites to 17.8 kJ/m² in RTPPNC containing 20 wt % POE. This shows that the POE elastomer was very effective in converting brittle PP nanocomposites into tough nanocomposites. However, the Young's modulus, tensile strength, flexural modulus, and flexural strength of the blends decreased with respect to the PP nanocomposites, as the weight fraction of POE was increased to 20 wt %. Scanning electron microscopy (SEM) was used for the investigation of the phase morphology and rubber particles size. SEM study revealed a two‐phase morphology where POE, as droplets was dispersed finely and uniformly in the PP matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3441–3450, 2006     

Photochemical oxidation of fatty acid esters with and without chlorophyll

1. It has been confirmed that the principal products formed in the oxidation of methyl oleate by oxygen under a variety of conditions are predominantlytrans hydroperoxides. However no inversion of the double bond occurs in unoxidized oleate. Hence the conversion ofcis totrans double bonds and peroxide formation occur together in the same molecules.
2. The autoxidation of methyl linoleate at low temperature yields predominantlycis,trans conjugated hydroperoxides. Autoxidation at 25°C., oxidation catalyzed by visible light, or ultraviolet light and copper soap catalyzed oxidation at temperatures appreciably above 0°C., lead to the formation primarily oftrans,trans conjugated hydroperoxides. The inversion of the second double bond in this case appears to be independent of the peroxide-forming reactions.
3. The photochlorophyll oxidation of methyl linoleate leads to the formation of some unconjugated hydroperoxides, some of which containtrans double bonds.
4. Under all of the conditions employed in the present investigation, the oxidation of methyl oleate and linoleate led primarily to the formation of monomeric peroxides which retained most of the unsaturation of the parent compound.

     

Monitoring web services’ quality of service: a literature review

Monitoring Quality of Service (QoS) compliance is an important procedure in web service environment. It determines whether users’ expectations are met, and becomes the vital factor for them to decide whether to continue paying for the service or not. The monitoring is performed by checking the actual services performance against the QoS stated in Service Level Agreement (SLA). In relation to that, the need for monitoring vague QoS specifications in SLA has become more apparent nowadays. This paper reviews the published literature on web services QoS monitoring. A total of 60 selected articles were systematically analyzed. There were 23 of the articles selected through restrictive search criteria while the other 37 were selected based on unrestrictive search criteria. The review shows that little evidence exists on monitoring vague QoS specifications of web services. Providing ability for monitoring QoS that is specified vaguely in SLA could give new insights and implications to web services field. This paper concludes with some recommended future works to construct the theory and perform the empirical research.     

Painting-91: a large scale database for computational painting categorization

Computer analysis of visual art, especially paintings, is an interesting cross-disciplinary research domain. Most of the research in the analysis of paintings involve medium to small range datasets with own specific settings. Interestingly, significant progress has been made in the field of object and scene recognition lately. A key factor in this success is the introduction and availability of benchmark datasets for evaluation. Surprisingly, such a benchmark setup is still missing in the area of computational painting categorization. In this work, we propose a novel large scale dataset of digital paintings. The dataset consists of paintings from 91 different painters. We further show three applications of our dataset namely: artist categorization, style classification and saliency detection. We investigate how local and global features popular in image classification perform for the tasks of artist and style categorization. For both categorization tasks, our experimental results suggest that combining multiple features significantly improves the final performance. We show that state-of-the-art computer vision methods can correctly classify 50 % of unseen paintings to its painter in a large dataset and correctly attribute its artistic style in over 60 % of the cases. Additionally, we explore the task of saliency detection on paintings and show experimental findings using state-of-the-art saliency estimation algorithms.     

Robust Fault Diagnosis for Quadrotor UAVs Using Adaptive Thau Observer

A robust Fault Diagnosis (FD) scheme for a real quadrotor Unmanned Aerial Vehicle (UAV) is proposed in this paper. Firstly, a novel Adaptive Thau observer (ATO) is developed to estimate the quadrotor system states and build a set of offset residuals to indicate actuators’ faults. Based on these residuals, some rules of Fault Diagnosis (FD) are designed to detect and isolate the faults as well as estimate the fault offset parameters. Secondly, a synthetic robust optimization scheme is presented to improve Fault Estimation (FE) accuracies, three key issues include modeling uncertainties, and magnitude order unbalances as well as noises are addressed. Finally, a typical fault of rotors is simulated and injected into one of four rotors of the quadrotor, and experiments for the FD scheme have been carried out. Unlike former research works on the FD schemes for quadrotors, our proposed FD scheme based on the ATO can not only detect and isolate the failed actuators, but also estimate the fault severities. Regardless of roughness of the real flying data, the FD results still have sufficient FE accuracies.     

Identification of probe request attacks in WLANs using neural networks

Any sniffer can see the information sent through unprotected ‘probe request messages’ and ‘probe response messages’ in wireless local area networks (WLAN). A station (STA) can send probe requests to trigger probe responses by simply spoofing a genuine media access control (MAC) address to deceive access point (AP) controlled access list. Adversaries exploit these weaknesses to flood APs with probe requests, which can generate a denial of service (DoS) to genuine STAs. The research examines traffic of a WLAN using supervised feed-forward neural network classifier to identify genuine frames from rogue frames. The novel feature of this approach is to capture the genuine user and attacker training data separately and label them prior to training without network administrator’s intervention. The model’s performance is validated using self-consistency and fivefold cross-validation tests. The simulation is comprehensive and takes into account the real-world environment. The results show that this approach detects probe request attacks extremely well. This solution also detects an attack during an early stage of the communication, so that it can prevent any other attacks when an adversary contemplates to start breaking into the network.