Applicability of the flood‐pulse concept in a temperate floodplain river ecosystem: thermal and temporal components

Annual growth increments were calculated for blue catfish (Ictalurus furcatus) and flathead catfish (Pylodictis olivaris) from the lower Mississippi River (LMR) to assess hypothesized relationships between fish growth and floodplain inundation as predicted by the Flood‐Pulse Concept. Variation in catfish growth increment was high for all age classes of both species, and growth increments were not consistently related to various measures of floodplain inundation. However, relationships became stronger, and usually direct, when water temperature was integrated with area and duration of floodplain inundation. Relationships were significant for four of six age classes for blue catfish, a species known to utilize floodplain habitats. Though similar in direction, relationships were weaker for flathead catfish, which is considered a more riverine species. Our results indicate the Flood‐Pulse Concept applies more strongly to temperate floodplain‐river ecosystems when thermal aspects of flood pulses are considered. We recommend that future management of the LMR should consider ways to ‘recouple’ the annual flood and thermal cycles. An adaptive management approach will allow further determination of important processes affecting fisheries production in the LMR. Copyright © 2006 John Wiley & Sons, Ltd.     

Validation and modification of WAVE spray model for diesel combustion simulation

In CFD simulation of diesel combustion, the predictive capabilities of the spray model play the most important role. Consequently, under the strict guidelines of the V&V, a method to adjust parameters of diesel spray model WAVE to accompany with the in-cylinder physical progress has been investigated in this paper. Moreover, the simulation of the spray has been validated by high-speed photography experiments and verified by the equation proposed by Hiroyasu. Finally, a modified setup for the WAVE spray model has been proposed and applied in the spray and combustion simulation for Deutz1013 diesel in different engine speed.     

Cooperative Catalysis: A New Development in Heterogeneous Catalysis

Whereas cooperative effect in catalysis, in which multiple chemical interactions participate cooperatively to achieve significant enhancement in catalytic activity and/or selectivity, is common in enzymatic reactions, it has been sparingly employed in heterogeneous catalytic systems. Here, some recent literature examples of abiotic catalysis, with emphasis on heterogeneous systems, that employ cooperation between acid and base and two metal centers are briefly described to demonstrate the principles involved. Since effective cooperation places strict demand on the positions of the different functional groups, new synthetic methods and strategies are needed to design and construct structures useful for cooperative catalysis. Recent progress in our laboratory in synthesizing new nanocage structures that possess molecular-size cavities, atomic layer thick, porous shells with internal functional groups is described. These recent developments suggest possibilities of new catalytic transformations that have not been attempted before. This is illustrated with two speculative examples utilizing cooperative catalysis: oxidative hydrolytic desulfurization and terminal carbon activation of hydrocarbon molecules.     

The effects of EPM long chain branching on TPO properties

In this paper the effects of EPM long chain branching are examined in terms of reheological, processing, and physical property responses in mechanically blended TPOs. Morphological effects induced by this polymer variable as indicated by SEM are detailed as well. The EPMs used in this study were produced by DSM Copolymer, Inc., in Baton Rouge, Louisiana.     

Transformation of fatty acid hydroperoxides by alkali and characterization of products

It has previously been determined that (13S,9Z,11E)-13-hydroperoxy-9,11-octadecadienoic acid was mainly converted into (13S,9Z,11E)-13-hydroxy-9,11-octadecadienoic acid by 5 N KHO with preservation of the stereochemistry of the reactant [Simpson, T.D., and Gardner, H.W. (1993)Lipids 28, 325–330]. In addition, about 20–25% of the reactant was converted into several unknown by-products. In the present work it was confirmed that the stereochemistry was conserved during the hydroperoxy-diene to hydroxydiene transformation, but also, novel by-products were identified. It was found that after only 40 min reaction (9Z)-13-oxo-trans-11,12-epoxy-9-octadecenoic acid accumulated to as much as 7% of the total. Later, (9Z)-13-oxo-trans-11,12-epoxy-9-octadecenoic acid began to disappear, and several other compounds continued to increase in yield. Two of these compounds, 2-butyl-3,5-tetradecadienedioic acid and 2-butyl-4-hydroxy-5-tetradecenedioic acid, were shown to originate from (9Z)-13-oxo-trans-11,12-epoxy-9-octadecenoic acid, and they accumulated up to 2–3% each after 4 to 6 h. Some other lesser products included 11-hydroxy-9,12-heptadecadienoic acid, 3-hydroxy-4-tridecenedioic acid, 13-oxo-9,11-octadecadienoic acid and 12,13-epoxy-11-hydroxy-9-octadecenoic acid. Except for the latter two, most or all of the compounds could have originated from Favorskii rearrangement of the early product, (9Z)-13-oxo-trans-11,12-epoxy-9-octadecenoic acid, through a cyclopropanone intermediate.     

Aliphatic heterocyclic polymers

Aliphatic polybenzoxazoles, polybenzothiazoles, and polybenzimidazoles have been prepared by three methods: in poly(phosphoric acid), by the polyamide precursor, and by melt polymerization. The melt polymerization method was found to be the most satisfactory. All of the aliphatic heterocyclic polymers had excellent thermal stability, resistance to alkaline hydrolysis, high glass transition temperatures, and a high degree of flexibility. The only class of polymer found having any degree of solubility, however, was the polybenzimidazoles. Aliphatic polybenzimidazole films were prepared by solution casting. These films were found to be extremely flexible at ambient and cryogenic temperatures. The films were unaffected by alkaline hydrolysis, even in an oxidizing medium. A molding prepared from the aliphatic polybenzimidazole had excellent physical properties at both cryogenic and room temperature.     

High temperature swelling of coal/tetralin mixtures in a high pressure microdilatometer

High pressure microdilatometer experiments were performed on a subbituminous (Wyodak) and a bituminous (Illinois no. 6) coal in helium and hydrogen atmospheres with and without added tetralin. Wyodak coal samples showed no swelling but contractions ranging between 24 and 40 vol% upon heating at 20 and 100 °C min^{− 1} under helium or hydrogen pressures between 150 and 1000 psig (˜1.0–6.9 MPa). Under the same conditions, Illinois no. 6 coals displayed contractions (25–60 vol%) prior to swelling up to 117 vol%. Upon tetralin addition (at 35–190 wt% of the coal), Wyodak coal samples did not swell but showed an increasing contraction with increasing helium or hydrogen pressure due to a slight softening and fusion of the coal particles. In contrast, addition of tetralin at much lower concentrations (5–35 wt%) had a marked effect on the contraction and swelling behaviour of Illinois no. 6. A maximum swelling of 200 vol% was obtained at a tetralin addition of 30 wt%. The increased swelling results from more extensive softening and fusion of coal particles in the presence of tetralin. Both coals showed a decreasing char yield with increasing tetralin concentration. The substantially lower extent of interaction observed between Wyodak coal samples and tetralin compared to Illinois no. 6 coal can be attributed to the differences in pore structure and/or chemical constitution of the two coal samples. Examination of the resultant solids by optical microscopy revealed the microstructural changes produced by thermal treatment in dilatometer experiments.     

Sex pheromone of the mullein bug,Campylomma verbasci (Meyer) (Heteroptera: Miridae)

The first known sex pheromone for the family Miridae is reported for the mullein bug,Campylomma verbasci (Meyer) (Heteroptera: Miridae). Extracts of and Porapak Q-trapped volatiles from females were attractive to males in field bioassays. Butyl butyrate and hexyl butyrate were the predominant compounds in the females' volatiles, but these compounds previously had been found to be inactive when released alone or in combination. Butyl butyrate in combination with an isolated trace chemical, (E)-crotyl butyrate (which was inactive alone), rivaled the attraction elicited by five live females. When synthetic butyl butyrate and (E)-crotyl butyrate in a 16: 1 ratio were released at 91 or 183 g/day, they comprised an effective attractant for male bugs.