3-D FEM-simulation of hot forming processes for the production of a connecting rod

A fully three-dimensional thermo-mechanically coupled FEM-simulation of the production of a connecting rod has been performed. The production process consists of five stretch-rolling and subsequent die-forging steps. Workpieces from all stages of the process are used to examine the geometry, microstructure and local mechanical properties. Combining the results of these examinations with information on local process variables like strain and temperature from numerical simulation made it possible to study the influence of the deformation history on the local microstructure and mechanical properties. The simulation of the hot forming process shows good agreement with experiments regarding to geometry and temperature fields of the workpiece.     

A 64-point Fourier transform chip for high-speed wireless LAN application using OFDM

In this paper, we present a novel fixed-point 16-bit word-width 64-point FFT/IFFT processor developed primarily for the application in an OFDM-based IEEE 802.11a wireless LAN baseband processor. The 64-point FFT is realized by decomposing it into a two-dimensional structure of 8-point FFTs. This approach reduces the number of required complex multiplications compared to the conventional radix-2 64-point FFT algorithm. The complex multiplication operations are realized using shift-and-add operations. Thus, the processor does not use a two-input digital multiplier. It also does not need any RAM or ROM for internal storage of coefficients. The proposed 64-point FFT/IFFT processor has been fabricated and tested successfully using our in-house 0.25-/spl mu/m BiCMOS technology. The core area of this chip is 6.8 mm/sup 2/. The average dynamic power consumption is 41 mW at 20 MHz operating frequency and 1.8 V supply voltage. The processor completes one parallel-to-parallel (i.e., when all input data are available in parallel and all output data are generated in parallel) 64-point FFT computation in 23 cycles. These features show that though it has been developed primarily for application in the IEEE 802.11a standard, it can be used for any application that requires fast operation as well as low power consumption.     

Exposure of aerosols and nanoparticle dispersions to in vitro cell cultures: A review on the dose relevance of size, mass, surface and concentration

The exposure of cell cultures to aerosols or nanoparticle dispersions offers an experimental access to study particle related toxicology and nanomedicine. The present article discusses the concept of dose for soluble or persistent particles with optional stabilizing shells and/or chemical or catalytic activity. We further investigate the minimal set of experiments and controls required for hands-on experiments feasible in well-equipped standard research laboratories. This article recommends strategies to implement nanotoxicity experiments into laboratory routine and shall assist aerosol scientists to engage into biological/medical questions. The most prominent differences between molecule- and particle-related health effects are additionally discussed as physical (concentration-dependent mobility due to agglomeration) and chemical effects (catalytic/chemically active surfaces, Trojan horse type toxin transport through membranes, long-term risks). In the last part we describe the implementation of these concepts within the Swiss Recommendations for Industrial Use of Nanoparticles as a first attempt to provide a regulatory framework for the risk assessment of nanoproducts.     

Production of Multichannel Ceramics Based on Ti3SiC2

Refractories and Industrial Ceramics - A multichannel ceramic based on Ti3SiC2 was prepared using reactive composites consisting of regularly placed Ti rods and a silicon carbide ceramic matrix...     

Fabrication of Ti3SiC2-Ti4SiC3-SiC ceramic composites through carbosilicothermic reduction of TiO2

Dense Ti₃SiC₂-SiC, Ti₄SiC₃-SiC, and Ti₃SiC₂-Ti₄SiC₃-SiC ceramic composites were fabricated through carbosilicothermic reduction of TiO₂ under vacuum, followed by hot pressing of the as-synthesized products under 25 MPa at 1600°C. In the reduction step, SiC either alone or in combination with elemental Si was used as a reductant. A one-third excess of SiC was added in the reaction mixtures in order to ensure the presence of approximately 30 vol.% SiC in the products of synthesis. During the hot pressing step, the samples that contained Ti₃SiC₂ showed better densification compared to those containing Ti₄SiC₃. The obtained composites exhibited the strength properties typical of coarse-grained MAX-phase ceramics. The flexural strength values of 424 and 321 MPa were achieved in Ti₃SiC₂-SiC, and Ti₃SiC₂-Ti₄SiC₃-SiC composites, respectively. The fracture toughness values were 5.7 MPa·m^1/2.     

Artifact analysis and reconstruction improvement in helical cardiac cone beam CT

With the introduction of cone beam (CB) scanners, cardiac volumetric computed tomography (CT) imaging has the potential to become a noninvasive imaging tool in clinical routine for the diagnosis of various heart diseases. Heart rate adaptive reconstruction schemes enable the reconstruction of high-resolution volumetric data sets of the heart. Artifacts, caused by strong heart rate variations, high heart rates and obesity, decrease the image quality and the diagnostic value of the images. The image quality suffers from streak artifacts if suboptimal scan and reconstruction parameters are chosen, demanding improved gating techniques. In this paper, an artifact analysis is carried out which addresses the artifacts due to the gating when using a three-dimensional CB cardiac reconstruction technique. An automatic and patient specific cardiac weighting technique is presented in order to improve the image quality. Based on the properties of the reconstruction algorithm, several assessment techniques are introduced which enable the quantitative determination of the cycle-to-cycle transition smoothness and phase homogeneity of the image reconstruction. Projection data of four patients were acquired using a 16-slice CBCT system in low pitch helical mode with parallel electrocardiogram recording. For each patient, image results are presented and discussed in combination with the assessment criteria.