High nutrient loading and climatic parameters influence the dominance and dissimilarity of toxigenic cyanobacteria in northern bays of Lake Victoria

Eutrophication of Lake Victoria led to changes in its phytoplankton communities. However, different levels of eutrophication exist in the open lake and the bays, and between embayments. This study utilized spatial and temporal sampling of Napoleon Gulf and Murchison Bay, exhibiting different trophic conditions. Over one year, we investigated phytoplankton biomass, richness, diversity and dissimilarity, and related the dynamics of the dominant species to the limnological and climatic conditions. The results confirmed that Napoleon Gulf and Murchison Bay showed large differences in eutrophication status, with lower nutrient concentrations in Napoleon Gulf than in Murchison Bay, where a strong gradient was observed from inshore to offshore areas. These nutrient dynamics resulted in a 4 to 10 fold higher chlorophyll-a in Murchison Bay than in Napoleon Gulf. From the embayments, 135 phytoplankton taxa were recorded with no significant differences in alpha diversity. However, high dissimilarity in community structure was observed in beta diversity, mostly due to a turnover among the dominant toxigenic species. Thus, from a similar species pool, there was a shift in the dominant toxigenic cyanobacteria from Microcystis flos-aquae and M. aeruginosa in Murchison Bay, Dolichospermum circinale and Planktolyngbya circumcreta in Napoleon Gulf to D. circinale in the offshore stations. These cyanobacteria are toxigenic taxa with known health hazards. Using partial least square models, we showed that both climatic variables (e.g. wind, solar radiation) and levels of inorganic dissolved nutrients (e.g. SRP, NO₃^–, and NH₄⁺) are the main drivers of differences and dominance in cyanobacteria communities in northern Lake Victoria.     

Observing Inequality: Can Ergonomic Observations Help Interventions Transform the Role of Gender in Work Activity?

Computer Supported Cooperative Work (CSCW) - Work activity ergonomics (sometimes called francophone ergonomics) draws heavily on observation in order to support transformation of work to arrive at...     

Synthesis and Evaluation of Voltage-Gated Sodium Channel Blocking Pyrroline Derivatives Endowed with Both Antiarrhythmic and Antioxidant Activities

Under the hypothesis that cardioprotective agents might benefit from synergism between antiarrhythmic activity and antioxidant properties, a small series of mexiletine analogues were coupled with the 2,2,5,5-tetramethylpyrroline moiety, known for its antioxidant effect, in order to obtain dual-acting drugs potentially useful in the protection of the heart against post-ischemic reperfusion injury. The pyrroline derivatives reported herein were found to be more potent as antiarrhythmic agents than mexiletine and displayed antioxidant activity. The most interesting tetramethylpyrroline congener, a tert-butyl-substituted analogue, was at least 100 times more active as an antiarrhythmic than mexiletine.     

Characterization of the Functional Cross-Talk between Surface GABAA and Dopamine D5 Receptors

The γ-aminobutyric acid type A receptor (GABA_AR) plays a major role in fast inhibitory synaptic transmission and is highly regulated by the neuromodulator dopamine. In this aspect, most of the attention has been focused on the classical intracellular signaling cascades following dopamine G-protein-coupled receptor activation. Interestingly, the GABA_AR and dopamine D5 receptor (D5R) have been shown to physically interact in the hippocampus, but whether a functional cross-talk occurs is still debated. In the present study, we use a combination of imaging and single nanoparticle tracking in live hippocampal neurons to provide evidence that GABA_ARs and D5Rs form dynamic surface clusters. Disrupting the GABA_AR–D5R interaction with a competing peptide leads to an increase in the diffusion coefficient and the explored area of both receptors, and a drop in immobile synaptic GABA_ARs. By means of patch-clamp recordings, we show that this fast lateral redistribution of surface GABA_ARs correlates with a robust depression in the evoked GABAergic currents. Strikingly, it also shifts in time the expression of long-term potentiation at glutamatergic synapses. Together, our data both set the plasma membrane as the primary stage of a functional interplay between GABA_AR and D5R, and uncover a non-canonical role in regulating synaptic transmission.     

Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.     

A study of the cu clusters using gray-coded genetic algorithms and differential evolution

Energy minimization studies were carried out for a number of Cu clusters using binary and Gray-coded genetic algorithms along with real coded differential evolution, and their optimized ground state geometries are presented. The potential energy function is constructed using a two-body interaction methodology, involving both attractive and repulsive pair-potential terms. The results obtained through the evolutionary algorithms are compared against those obtained earlier using a Monte Carlo technique.     

Kinetics of chemical n-doping of polyacetylene

Polyacetylene (PA) films were doped with tetrahydrofuran and benzene solutions of organo potassium and lithium compounds. The kinetics for doping were determined from the variation of the dopant concentration with time, as a function of film thickness, dopant concentration and doping temperature. The experimental doping rates were compared to computed values deduced from a doping model taking into account the interfibrillar diffusion, separately measured with an inert hydrocarbon. This comparison allows a minimum value (10⁻¹⁵ cm²/s) to be determined for the intrafibrillar diffusion coefficient D_f of doped sites and cations. With such a value no homogeneous doping can be carried out at intermediate doping levels, for films thicker than about 50 microns, by a simple control of doping time or dopant concentration. This may, however, be achieved by a thermodynamic control using dopants of suitable redox potential.     

Varnish layer hardness of oriental beech (fagus orientalist L.) wood as affected by impregnation and bleaching

The impacts of impregnation and bleaching on the varnish layer hardness of Oriental beech (Fagus orientalist L.) wood were investigated. A number of bleaching combinations {[NaOH−H₂O₂], [NaOH−Ca(OH)₂−H₂O₂], [NaOH−MgSO₄−H₂O₂] [NaHSO₃−H₂C₂O₄], [NaSiO₃−H₂O₂], [KMnO₄+NaHSO₃+H₂O₃]} were applied at 18% concentration for bleaching to both impregnated and unimpregnated specimens of Oriental beech wood. Subsequently, water-based (WB) varnish was coated over the samples and the varnish layer hardness values were determined in accordance with ASTM D 4366-95. All of the chemicals used for bleaching reduced the surface hardness. However, after varnish coating, the hardness of most samples was similar to that of the varnish-coated natural (control) samples.     

Microstructure and Mechanical Properties of Hot-Pressed Silicon Carbide-Aluminum Nitride Compositions

A flexural strength of up to 1 GPa was achieved in SiC-AIN materials and is attributed to a dense, equiaxial grain structure of the 2H(δ) SiC-AIN solid solution, with a relatively uniform grain size of ∼ 1 μm. The strength was found to decrease with increasing grain size. While the β→α phase transformation and the formation of various metastable polytypes make microstructural control difficult in SiC materials, excellent control is facilitated in SiC-AIN materials as a result of the stable 2H solid solution. Several mechanisms of grain refinement during the β→ 2H transition were observed, most notably the direct formation of several 2H grains from a single β grain. In addition, grain growth is limited by the diffusion-controlled nature of the transition. These mechanisms could be utilized to achieve even higher strength values, with potentially higher reliability of the materials in structural applications.     

Testing usability and trainability of indirect touch interaction: perspective for the next generation of air traffic control systems

This study aims to determine whether indirect touch device can be used to interact with graphical objects displayed on another screen in an air traffic control (ATC) context. The introduction of such a device likely requires an adaptation of the sensory-motor system. The operator has to simultaneously perform movements on the horizontal plane while assessing them on the vertical plane. Thirty-six right-handed participants performed movement training with either constant or variable practice and with or without visual feedback of the displacement of their actions. Participants then performed a test phase without visual feedback. Performance improved in both practice conditions, but accuracy was higher with visual feedback. During the test phase, movement time was longer for those who had practiced with feedback, suggesting an element of dependency. However, this ‘cost’ of feedback did not extend to movement accuracy. Finally, participants who had received variable training performed better in the test phase, but accuracy was still unsatisfactory. We conclude that continuous visual feedback on the stylus position is necessary if tablets are to be introduced in ATC.