Black curves and creep behaviour of crumb rubber modified binders containing warm mix asphalt additives

Warm mix asphalt (WMA) is a new research topic in the field of road pavement materials. This technology allows lower energy consumption and greenhouse gas (GHG) emissions by reducing compaction and placement temperatures of the asphalt mixtures. However, this technology is still under study, and the influence of the WMA additives has yet to be investigated thoroughly and clearly identified, especially in the case of crumb rubber modified (CRM) binders.In order to study the effect that different types and quantities of organic waxes have on the high and intermediate temperature properties of 15 % and 20 % CRM binders, a dynamic shear rheometer (DSR) was used. Using Black diagrams, the rheological behaviour of the binders for the defined range of test temperature and frequency are summarised in a single diagram. In this way, a preliminary evaluation of the rheological behaviour in the extended domain of time and temperature can be attained as well as the effectiveness of the time–temperature superposition principle (TTSP) on the materials under study. Creep tests were also performed in order to evaluate the differences regarding mechanical response due to the addition of rubber and WMA additives, and particularly the ability to recover the strain at high temperatures.The results of this study reveal that these binders do not conform to the Time Temperature Superposition Principle (TTSP) and their rheological behaviour is strongly affected by the interaction of waxes and bituminous matrix and thus generally exhibited a higher elasticity compared to the corresponding control binder. The creep test results carried out proved the enhancement of elasticity and the resistance to permanent deformation produced by the addition of waxes. The WMA additives significantly lower the maximum deformation when compared to the control binders and slightly increased their elastic recovery.     

Perceptual and cognitive spatial learning.

Ss were taught novel mappings between visual space and motor space with either a variant on a prism adaptation paradigm (Exps 1 and 2) or a nonperceptual cognitive task (Exps 3 and 4). First, discrimination training specified that one visual location required a new pointing response but another location did not. This led to unusual generalization unlike typical generalization decrement. Second, training at 9 locations specified that 1 location required a new response but that the remaining 8 did not. This simple isolation mapping was unlearnable and instead a flat function fit through all of space. In contrast, for the cognitive paradigm, not only was isolation of one region of space easily learned, it was the preferred pattern of generalization. Implications for perceptual learning, as well as the qualitative distinctions between perceptual and cognitive learning, are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Topological invariants for lines

A set of topological invariants for relations between lines embedded in the 2-dimensional Euclidean space is given. The set of invariants is proven to be necessary and sufficient to characterize topological equivalence classes of binary relations between simple lines. The topology of arbitrarily complex geometric scenes is described with a variation of the same set of invariants. Polynomial time algorithms are given to assess topological equivalence of two scenes. Invariants and efficient algorithms is due to application areas of spatial database systems where a model for describing topological relations between planar features is sought     

A model for representing topological relationships between complex geometric features in spatial databases

Various models for the representation of topological relationships have been developed. The aim of this paper is to show that the set of relationships proposed in [7] (the CBM), for describing topological relationships among two-dimensional simple features, is applicable with few modifications to the case of complex features (that is, areas made up of several components possibly containing holes, lines with self-intersections, and/or more than two endpoints, and so on). The CBM offers a small set of topological relationships with high expressiveness which is proven to be mutually exclusive and complete, and therefore suitable to be embedded in a spatial query language.     

Low life purpose and high hostility are related to an attenuated decline in nocturnal blood pressure.

Objective: An attenuation of the nighttime decline in blood pressure (BP) predicts cardiovascular disease and cardiovascular-related mortality, beyond daytime BP levels. We investigated whether positive and negative psychological attributes were associated with sleep–wake BP ratios and examined sleep parameters as potential mediators of these relationships. Design: Two hundred twenty-four participants (50% men; 43% Black; mean age = 60 years) underwent ambulatory BP monitoring for 2 days and nights. Self-reports of positive and negative psychological attributes were collected. In-home polysomnography was conducted for 2 nights, and a wrist actigraph was worn for 9 nights. Main Outcome Measures: Sleep–wake mean arterial pressure (MAP) ratios. Results: After adjustment for demographics, body mass index, and hypertensive status, low life purpose and high hostility were associated with high sleep–wake MAP ratios. Depression, anxiety, and optimism were not related to MAP ratios. Sleep latency, fragmentation, architecture, and the apnea–hypopnea index were examined as potential mediators between psychological attributes and MAP ratios; only long sleep latency mediated the relationship between hostility and MAP ratios. Conclusion: Low life purpose and high hostility are associated with high sleep–wake BP ratios in Black and White adults, and these relationships are largely independent of sleep. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Medium and interface components in impedance microbiology

Classic impedance microbiology (CIM) is based on the measurement of the impedance components that appear between a pair of electrodes submerged in a cell containing inoculated broth. Either a bipolar or a tetrapolar technique can be applied, requiring about 1 x 10(3) to 3 x 10(7) cells/ml to produce detectable changes in the impedance curves. Theoretical analysis of the electrode-electrolyte interface during bacterial growth is lacking, with no generally accepted measuring standards. Besides, there is considerable disagreement. We separated out the interface and medium components using the frequency variation technique (FVT) and also analyzed the interface reactance-resistance diagram, both before and after bacterial growth. Medium resistance Rm, interface reactance Xi, and interface resistance Ri, were quantified as time functions growth curves, from the complex bipolar impedance seen between two electrodes. We took into account the electrical current density, the temperature and the associated circuitry, also explaining the theoretical and experimental bases that justify the proposed dissecting procedure. It was found that, within the working frequency range, Rm, Ri, and Xi percental growth curves are frequency-independent, i.e., neither Rm(f), nor Xi(f) nor Ri(f) changed their slopes before, during and after bacterial growth. Besides, no alpha-dispersion effect in Rm curves was detected. It is concluded that impedance microbiology could become a fertile area for interdisciplinary knowledge; its development might offer new avenues for basic and applied research.     

Impedance bacteriometry: medium and interface contributions duringbacterial growth

We measured impedance in a cell containing culture broth inoculated with E. coli, before and during bacterial growth. The electrode interface impedance components (Ri, Xi) and the culture medium component Rm were separated by making use of the Warburg's model frequency dependent properties. Measurements were carried out at different frequencies (from 18 Hz to 18 kHz) with a constant current impedance bridge as growth proceeded. It was found that: Growth curves for Ri and Xi showed a similar temporal pattern within the frequency range of 18-100 Hz. Dispersion was not observed in Rm, meaning that the same growth response was obtained within the 18-18,000 Hz range. At low frequency, the resistive and capacitive reactive components, or Rb and Xb, respectively, were directly measured, where Rb = (2.Ri + Rm) and Xb = 2.Xi and, at high frequency (above 5 kHz), Rm was obtained (for Zi is negligible). Thus, Ri was easily discriminated from Rm by simple arithmetic: Ri = [Rb (low f) - Rb (high f)]/2. In four experiments, the maximum spread of Xi, Ri, and Rm was smaller than 5%, indicating good repeatability. There is potential new information in dissecting out the growth curve in three separate component curves.     

Chemical constituents of some basidiomycetes

The sterol, fatty acid and free amino acid (FAA) contents of some Basidiomycetes were determined. The overall sterol distribution was similar to that of other mushrooms, with ergosterol as the predominant sterol accompanied by the other closely related sterols. The mushrooms examined also contained high levels of fatty acids of which linoleic is the most prominent. Glutamic acid, valine and proline were the dominant FAA.     

Current practice and open issues in strengthening historical buildings with composites

Modern techniques and innovative materials are often quite rapidly proposed and allowed in current practice, even for restoration of historical constructions, in which essential preservation criteria must be taken into account. The considerable variability and complexity of masonry structures and types means that choosing the most appropriate structural models and interventions is particularly difficult, since they must be based on suitable knowledge of both existing and new materials, and on their interactions in environmental and loading conditions. This paper discusses the potentials and limitations of externally bonded composite materials in masonry structures and components, in the light of knowledge acquired from research in the field, together with the requirements and recommendations of codes and restoration documents. The analysis of some case studies is presented, to highlight the advantages and constraints in the use of composites for strengthening historical buildings.     

Activation of parasitic bipolar transistor during reverse recovery of MOSFET's intrinsic diode

The activation of the parasitic bipolar transistor during reverse recovery of the internal diode of a power MOSFET used as a fly-back diode in a half-bridge circuit topology is investigated. Experimental observations, obtained by means of a non-destructive tester, and 2D MEDICI simulations indicate that, among the various physical and geometrical parameters of MOSFET elementary cell, the resistance associated to the contact on the source region plays the most relevant role during the activation process.