Probiotic-Induced Tolerogenic Dendritic Cells: A Novel Therapy for Inflammatory Bowel Disease?

Inflammatory bowel diseases (IBDs) are immune-mediated, chronic relapsing diseases with a rising prevalence worldwide in both adult and pediatric populations. Treatment options for immune-mediated diseases, including IBDs, are traditional steroids, immunomodulators, and biologics, none of which are capable of inducing long-lasting remission in all patients. Dendritic cells (DCs) play a fundamental role in inducing tolerance and regulating T cells and their tolerogenic functions. Hence, modulation of intestinal mucosal immunity by DCs could provide a novel, additional tool for the treatment of IBD. Recent evidence indicates that probiotic bacteria might impact immunomodulation both in vitro and in vivo by regulating DCs’ maturation and producing tolerogenic DCs (tolDCs) which, in turn, might dampen inflammation. In this review, we will discuss this evidence and the mechanisms of action of probiotics and their metabolites in inducing tolDCs in IBDs and some conditions associated with them.     

A study on the cure characteristics of epoxy/diaminodiphenylmethane system prepared at room temperature

The curing behavior and kinetics of epoxy resin with diaminodiphenylmethane (DDM) as the curing agent was studied by many researchers, however all of them prepared the system at a high‐temperature condition (i.e., T ≥ 80°C). In this study, a mixture of epoxy/DDM was prepared at ambient temperature and its curing characteristics were studied by using differential scanning calorimetry (DSC). The autocatalytic model was used to calculate the kinetic factors in the dynamic experiments. The kinetics of the curing reaction was also evaluated by two different isoconversional models; namely Friedman method and the Advanced Isoconversional method proposed by Vyazovkin to investigate the activation energy behavior during the curing reaction. The activation energy of the curing reaction was found to be in the range of 48 ± 2 kJ/mol and might be considered to be constant during the curing. In fact, our findings were different from the result reported by other researchers for the system which was prepared at elevated temperature. Therefore, it seems that the preparation temperature of the samples influenced considerably on the curing behavior of epoxy with DDM. Finally, a time–temperature–transformation (TTT) diagram was established to determine the cure process and glass transition properties of the system. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

3-D CMOS Circuits Based on Low-Loss Vertical Interconnects on Parylene-N

parylene-N is used as a dielectric layer to create ultra low-loss 3-D vertical interconnects and coplanar waveguide (CPW) transmission lines on a CMOS substrate. Insertion loss of 0.013 dB for a 3-D vertical interconnect through a 15-$mu$ m-thick parylene-N layer and 0.56 dB/mm for a 50- $Omega$ CPW line on the parylene-N layer (compared to 1.85 dB/mm on a standard CMOS substrate) are measured at 40 GHz. L-shaped, U-shaped, and T-junction CPW structures are also fabricated with underpasses that eliminate the discontinuities arisen from the slot-line mode and are characterized up to 40 GHz. A 3-D low-noise amplifier using these post-processed structures on a 0.13-$mu$ m CMOS technology is also presented along with the investigation of parasitic effects for accurate simulation of such a 3-D circuit. The 3-D circuit implementation reduces the attenuation per unit length of the transmission lines, while preserving the CMOS chip area (in this specific design) by approximately 25%. The 3-D amplifier measures a gain of 13 dB at 2 GHz with 3-dB bandwidth of 500 MHz, noise figure of 3.3 dB, and output 1-dB compression point of ${+}$ 4.6 dBm. Room-temperature processing, simple fabrication, low-loss performance, and compatibility with the CMOS process make this technology a suitable choice for future 3-D CMOS and BiCMOS monolithic microwave integrated circuit applications that currently suffer from high substrate loss and crosstalk.      

Improvement of processing parameters by using processing aids during the linear low‐density polyethylene film blowing process

Polymer processing aids are used to improve processing properties in the polyethylene industry. These materials improve not only the physical and mechanical properties of the final products but also their processing properties. This paper studies some of the processing variables such as die pressure, melt temperature, masterbatch activity, and die gap by examining the functions of polymer processing aids and, last but not least, the effects on the film blowing process of two‐component processing aids containing a perfluorinated additive and polyoxyethylene. J. VINYL ADDIT. TECHNOL., 2010. © 2009 Society of Plastics Engineers     

Pomegranate fallen leaves as a source of natural dye for mordant-free dyeing of wool

The application of metal mordants is usually necessary in dyeing of wool with natural dyes to improve the dye exhaustion and fastness properties. The majority of metal salts generally used as mordants are considered as toxic and it is important to find replacements for them. Plant sources with high content of tannins are good candidates as bio-mordant or colourant to overcome this drawback. In this study, the waste fallen leaves of pomegranate tree were used as a source of natural dye for the eco-friendly dyeing of wool fabric without the use of metal mordants. The dyeing process variables including dye concentration, dyebath pH, and temperature were optimised using response surface methodology to obtain the highest colour strength. The colour strength was increased by increasing the natural dye powder up to 100%owf while the optimum pH and dyebath temperature were 4 and 100°C, respectively. The sample dyed under the optimal condition exhibited good fastness properties against washing and light. This study approved the potential of Punica granatum fallen leaves for the dyeing of wool without any mordant, while high fastness properties were obtained.     

A knowledge based component/service repository to enhance analysts’ domain knowledge for requirements analysis

Knowledge of the business domain (e.g., insurance claim, human resources) is crucial to analysts’ ability to conduct good requirements analysis (RA). However, current practices afford little assistance to analysts in acquiring domain knowledge. We argue that traditional reuse repositories could be augmented by adding rich faceted information on component/services and artifacts such as business-process templates to help analysts acquire domain knowledge during RA. In this paper, we present the design of a Knowledge Based Component Repository (KBCR) for facilitating RA. Then, we report on the design and development of a KBCR prototype. We illustrate its application in a system that is populated with components and process templates for the auto insurance claim domain. An empirical study was conducted to assess its effectiveness in improving RA. Results showed that KBCR enhanced analysts’ business domain knowledge and helped them better prepare for RA. Our key research contribution is to offer analysts a rich repository (i.e., KBCR) containing domain knowledge that they could utilize to acquire domain knowledge that is crucial for carrying out RA. While repositories of reusable components have been employed for some time, no one has used such repositories to help analysts acquire domain knowledge in order improve the RA of the system.     

Synthesis, characterization and magnetic properties of NiS1+x nanocrystals from [bis(salicylidene)nickel(II)] as new precursor

[Bis(salicylidene)nickel(II)] was used as a precursor to prepare nickel sulfides nanoparticles of average size 20 nm by a chemical process in oleylamine. The products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-vis) and photoluminescence (PL) spectroscopy. Magnetization measurement indicates that both of the α-NiS and Ni₃S₄ nanoparticles show pramagnetism due to the size effect.     

Protein encapsulated in electrospun nanofibrous scaffolds for tissue engineering applications

The main purpose of tissue engineering is the preparation of fibrous scaffolds with similar structural and biochemical cues to the extracellular matrix in order to provide a substrate to support the cells. Controlled release of bioactive agents such as growth factors from the fibrous scaffolds improves cell behavior on the scaffolds and accelerates tissue regeneration. In this study, nanofibrous scaffolds were fabricated from biocompatible and biodegradable poly(lactic‐co‐glycolic acid) through the electrospinning technique. Nanofibers with a core–sheath structure encapsulating bovine serum albumin (BSA) as a model protein for hydrophilic bioactive agents were prepared through emulsion electrospinning. The morphology of the nanofibers was evaluated by field‐emission scanning electron microscopy and the core–sheath structure of the emulsion electrospun nanofibers was observed by transmission electron microscopy. The results of the mechanical properties and X‐ray diffraction are reported. The scaffolds demonstrated a sustained release profile of BSA. Biocompatibility of the scaffolds was evaluated using the MTT (3(4,5‐ dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay for NIH‐3T3 fibroblast cells. The results indicated desirable biocompatibility of the scaffolds with the capability of encapsulation and controlled release of the protein, which can serve as tissue engineering scaffolds. © 2013 Society of Chemical Industry     

Effect of temperature on crack initiation in gas formed structures

In the gas forming process, the work piece is formed by applying gas pressure. However, the gas pressure and the accompanying gas temperature can result in crack initiation and unstable crack growth. Thus, it is vital to determine the critical values of applied gas pressure and temperature to avoid crack and fracture failure. We studied the mechanism of fracture using an experimental approach and finite element simulations of a perfect aluminum sheet containing no inclusions and voids. The definition of crack was based on ductile damage mechanics. For inspection of initiation of crack and rupture in gas-metal forming, the ABAQUS/EXPLICIT simulation was used. In gas forming, the applied load is the pressure applied rather than the punching force. The results obtained from both the experimental approach and finite element simulations were compared. The effects of various parameters, such as temperature and gas pressure value on crack initiation, were taken into account.