Design development of a static sunshade using small scale modeling technique

The rising global demand for energy has triggered emphasis on conservation of energy. Buildings are one of the important energy consuming sectors. Passive solar architecture encompasses a wide range of strategies and options resulting in energy efficient building design and increased occupant's comfort. Passive solar design, aiming at increasing direct solar gains during winter period and to avoid overheating during summer period should make use of specific shading devices over energy efficient window. The static sunshades are most effective for solar control inside the buildings.Countries like India have composite climate, which can be classified under summer, winter and rainy season. Depending on the seasonal requirements, this paper introduces a new geometry of a static sunshade, designed by calculating the sun angles for the two dates. The static sun shading design methodology is validated with the help of small scale modeling experimentation technique, carried out in Pilani, Rajasthan (India). Although insulating materials can be used as a part of a building structure, its feasibility should be checked before particular application. In the present paper, the two small-scale experimental models of actual construction material with varying static sunshades, i.e. horizontal and the proposed one have been constructed and analyzed with the models of insulating material (Polyurethane Foam [PUF]). Depending upon the solar intersection over south facade wall, sunlit area and shaded area have been correlated with temperature inside the models to decide the effectiveness of the proposed sunshade.     

Synthesis and characterization of acidic properties of Al-SBA-15 materials with varying Si/Al ratios

Al-SBA-15 of varying Si/Al ratios in the range 11.4–78.4 was synthesized using tri-block copolymer P123. The calcined materials were examined by XRD, pore size distribution, surface area, ²⁷Al NMR spectroscopy. The acidity and acid strength distribution were studied using microcalorimetric adsorption of NH₃. The acidic properties were also examined by cumene cracking reaction as a function of Si/Al ratios. Systematic variation of acidity and activity was observed as a function of Si/Al ratio. The initial heats of NH₃ adsorption correlated well with activity indicate that acid sites with ΔH > 100 kJ/mole is responsible for cumene cracking activity. Linear correlations were obtained with total acidity and cumene cracking activities. The tetrahedral aluminum was found to be responsible for the observed acidities and catalytic activities.     

Elongational viscosity of LDPEs and polystyrenes using entrance loss data

For two low‐density polyethylenes and two polystyrenes, axisymmetric and planar elongational viscosities are estimated using entrance loss data from capillary and slit rheometers, respectively. The elongational viscosity is estimated by optimizing the values of various parameters in the Sarkar–Gupta elongational viscosity model such that the entrance loss predicted by a finite element simulation agrees with the corresponding experimental data. The predicted entrance loss is in good agreement with the experimental data at high flow rates. The difference in the experimental and predicted entrance loss at lower flow rates might have been caused by large error in the experimental data in this range. POLYM. ENG. SCI., 2008. © 2007 Society of Plastics Engineers     

The schnittaxiom and unions of fuzzy subgroups

A necessary and sufficient condition for the union of an arbitrary family of fuzzy subgroups of a group to be a fuzzy group has been proposed. The criterion which gives a cut of the unit interval is called the Schnittaxiom. It has been applied successfully to investigate fuzzy subgroupness of arbitrary unions of homomorphic images and preimages.     

Wavelet domain-based video noise reduction using temporal discrete cosine transform and hierarchically adapted thresholding

A novel spatio-temporal filter for video denoising, which operates entirely in the wavelet domain, is proposed. For effective noise reduction, the spatial and temporal redundancies that exist in the wavelet domain representation of a video signal are exploited. First, a 2D discrete wavelet transform is applied to the input noisy frames. This is followed by a discrete cosine transform (DCT), which is applied to the temporal subband coefficients to minimise the redundancy among the consecutive frames. The DCT transformed, noise-free coefficients in the different wavelet domain subbands for the original image sequence are modelled using a prior having a generalised Gaussian distribution. On the basis of this prior, filtering of the noisy wavelet coefficients in each subband is carried out using a new, low-complexity wavelet shrinkage method, which utilises the correlation that exists between subsequent resolution levels. Experimental results show that the proposed scheme outperforms several state-of-the-art spatio-temporal filters in terms of both the peak signal-to-noise ratio and the visual quality     

Studies on the electrical conductivity and galvanomagnetic characteristics of short carbon fibre filled thermoplastic elastomers

The electrical resistivity of short carbon fibre filled thermoplastic elastomers based on natural rubber-high density polyethylene (NR-HDPE) blend and styrene-isoprene-styrene (S-I-S) block copolymer has been studied by varying the concentration of fibre from the 0 to 40 phr level. A sharp drop in resistivity is observed in both cases after a critical concentration of fibre is reached, with the S-I-S system showing lower values of critical concentration. At higher concentrations, experimental values of the electrical conductivity agreed reasonably well with the calculated values from a theory based on the probability of formation of a conductive network. The effect of temperature on the resistivity of the composites has also been investigated in a temperature range of 27–120 °C and 27–90 °C for the NR-HDPE system and S-I-S system, respectively. The type of carrier in both the composites is found to be n-type, i.e. electrons, and the activation energy of hopping of the electrons for both the systems has been calculated. A Hall effect study has also been carried out to determine the carrier concentration and drift mobility of both the composites.     

Traffic classification and scheduling in ATM networks

Virtual paths (VPs) are an integral part of the resource management and control hierarchy of ATM (asynchronous transfer mode) networks. To improve the utilization of network resources and facilitate management and control, source types are organized into traffic classes. Each traffic class is transported by its own virtual path subnetwork. In this paper, we consider issues related to the design of traffic classes. We consider an ATM switch node to which cells arrive from a diverse set of source types. Traffic classes are assumed to be served according to a weighted round robin policy, while cells belonging to a given traffic class are served in first-come-first-served order. We consider the problem of determining the optimal set of traffic classes. Under suitable simplifying assumptions, it is shown that the above problem can be modeled as a set-partitioning problem. The structure of the problem at hand is then exploited to develop an efficient heuristic. Several examples are given to illustrate the developed methodology.Supported partially through NSF Grant NCR-891447 and AT&T Grant 5-23690.     

Binary rewriting and call interception for efficient runtime protection against buffer overflows

Buffer overflow vulnerabilities are one of the most commonly and widely exploited security vulnerabilities in programs. Most existing solutions for avoiding buffer overflows are either inadequate, inefficient or incompatible with existing code. In this paper, we present a novel approach for transparent and efficient runtime protection against buffer overflows. The approach is implemented by two tools: Type Information Extractor and Depositor (TIED) and LibsafePlus. TIED is first used on a binary executable or shared library file to extract type information from the debugging information inserted in the file by the compiler and reinsert it in the file as a data structure available at runtime. LibsafePlus is a shared library that is preloaded when the program is run. LibsafePlus intercepts unsafe C library calls such as strcpy and uses the type information made available by TIED at runtime to determine whether it would be ‘safe’ to carry out the operation. With our simple design we are able to protect most applications with a performance overhead of less than 10%. Copyright © 2006 John Wiley & Sons, Ltd.