Neural network control of communications systems

Neural networks appear well suited to applications in the control of communications systems for two reasons: adaptivity and high speed. This paper describes application of neural networks to two problems, admission control and switch control, which exploit the adaptivity and speed property, respectively. The admission control problem is the selective admission of a set of calls from a number of inhomogeneous call classes, which may have widely differing characteristics as to their rate and variability of traffic, onto a network. It is usually unknown in advance which combinations of calls can be simultaneously accepted so as to ensure satisfactory performance. The approach adopted is that key network performance parameters are observed while carrying various combinations of calls, and their relationship is learned by a neural network structure. The network model chosen has the ability to interpolate or extrapolate from the past results and the ability to adapt to new and changing conditions. The switch control problem is the service policy used by a switch controller in transmitting packets. In a crossbar switch with input queueing, significant loss of throughput can occur when head-of-line service order is employed. A solution can be based on an algorithm which maximizes throughput. However since this solution is typically required in less than one microsecond, software implementation policy is infeasible. We will carry out an analysis of the benefits of such a policy, describe some existing proposed schemes for its implementation, and propose a further scheme that provides this submicrosecond optimization.     

Robust crossfeed design for hovering rotorcraft

Control law design for rotorcraft fly-by-wire systems normally attempts to decouple the angular responses using fixed-gain crossfeeds. This approach can lead to poor decoupling over the frequency range of pilot inputs and increase the load on the feedback loops. In order to improve the decoupling performance, dynamic crossfeeds should be adopted. Moreover, because of the large changes that occur in the aircraft dynamics due to small changes about the nominal design condition, especially for near-hovering flight, the crossfeed design must be ‘robust’. A new low-order matching method is presented here to design robust crossfeed compensators for multi-input, multi-output (MIMO) systems. The technique minimizes cross-coupling given an anticipated set of parameter variations for the range of flight conditions of concern. Results are presented in this paper of an analysis of the pitch/roll coupling of the UH-60 Black Hawk helicopter in near-hovering flight. A robust crossfeed is designed that shows significant improvement in decoupling perfomance and robustness over the fixed-gain or single point dynamic compensators. The design method and results are presented in an easily used graphical format that lends significant physical insight to the design procedure. This plant precompensation technique is an appropriate preliminary step to the design of robust feedback control laws for rotorcraft.     

MEETING THE IT CHALLENGES OF BUSINESS The Changing Mandate for MBAs

What is the implication for business when information technology (IT) changes in the workplace without a commensurate change in the composition of business programs educating tomorrow's employees? A survey of MBA graduates forms the basis of this article on the IT skills needed in the marketplace.     

Large-deviation inequalities for parameter estimators in stochastic systems

Translated from Kibernetika i Sistemnyi Analiz, No. 2, pp. 95–112, March–April, 1994.     

Modified surface-active monomers for adhesive bonding to dentin

PMGDM, a PMDM-type adhesive monomer, was synthesized from pyromellitic dianhydride and glycerol dimethacrylate. Only the para isomer of PMDM, a solid, is used in dental adhesives. The adhesive monomer PMGDM is a liquid and consists of a mixture of para- and meta isomers. This study shows that PMGDM has several advantages over PMDM. For example, the adhesive can be applied at a greater thickness, and additives and/or additional initiators for improved curing can be incorporated. Use of the liquid monomer PMGDM also provided a convenient means of varying the thickness of the adhesive layer between dentin and composite. The adhesive bonds were tested in both shear and tensile modes. PMDM was used as the control. The reliability of the bonds, as judged from the Weibull modulus and Weibull characteristic strength, was improved by (1) use of more concentrated solutions of PMGDM adhesive, (2) use of an adhesive thickness of about 25 microns, and (3) modification of PMGDM with a diluent monomer which is expected to enhance the degree of cure and/or the dentin-wetting properties of the adhesive resin.     

Two cell-wall-associated aminopeptidases from Lactobacillus helveticus and the purification and characterization of APII from strain ITGL1

Lactobacillus helveticus ITGL1 is able to hydrolyse many amino-acyl and dipeptidyl-p-nitroanilides. Analysis of heat inactivation kinetics, metal ion and protease inhibitor effects, and the subcellular location of aminopeptidase activities in both the parental strain and mutants deficient in lysyl-p-nitroanilide hydrolysis, led to the characterization of two cell-wall-associated aminopeptidases, APII and APIV. APII, which catalysed L-lysine p-nitroanilide hydrolysis, was purified about 28-fold to homogeneity from cell-wall extracts of L. helveticus ITGL1 and characterized. The purified enzyme appeared to be monomeric, with a molecular mass of 97 kDa. Aminopeptidase activity was greatest at pH 6.5 and 50 degrees C. APII was completely inhibited by bestatin, chelating agents such as EDTA or 1,10-phenanthroline and the divalent cations Zn2+ and Cu2+. The activity of the EDTA-treated enzyme was restored by Co2+, Ca2+ or Mn2+. Although APII was able to degrade several dipeptides and tripeptides with hydrophobic N-terminal amino acid (Leu, Ala), it was inactive on peptides containing Pro or Gly, and may thus contribute to the development of cheese flavour by processing bitter peptides.     

Holocaust survivors and escapees: Their strengths.

The conclusions clinicians have drawn about Holocaust survivors over the last 50 yrs differ sharply from researchers' findings. It is important to evaluate these discrepancies since different perceptions of survivors affect treatment approaches. The researchers' view, stressing the survivor's resilience and resourcefulness, contrasts with clinical impressions centering on a survivor syndrome involving deep emotional disturbances as residues of the Holocaust experience. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A coverage plan for health centres in Murewa district in Zimbabwe: an example of action research

Good access to health facilities providing good first-level health care remains problematic in many developing countries. It is a hindrance to effective and efficient functioning of the hospital, as outpatient departments become overcrowded with patients from areas without health centres. In many cases the quality of care delivered to these patients is poor because within the district health system the hospital is not the best place for the supply of comprehensive, integrated and continuous care. Eventually, high hospital involvement in first-level care can jeopardize the delivery of adequate referral care for those patients who desperately need the hospital's technology and expertise. This paper provides an account of the way this problem was investigated and managed by the district health management team in the Murewa district in north-east Zimbabwe. The design of a comprehensive 'master plan' or 'coverage plan' is presented as well as the problems and difficulties encountered. The Murewa experience highlights the relevance of a coverage plan for rational and coherent health infrastructure planning at district level. The approach followed by the Murewa team illustrates the use of action research as an integral part of the management of district health systems.     

Risk-based recommendations for mammographic screening for women in their forties

PURPOSE: To develop risk-based recommendations for mammographic screening for women in their 40s that take into account the woman's age, race, and specific risk factors. METHODS: We assumed that regular mammographic screening is justified for a 50-year-old woman, even one with no risk factors, and that a younger woman with an expected 1-year breast cancer incidence rate as great or greater than that of a 50-year-old woman with no risk factors would benefit sufficiently to justify regular screening. Recommendations under this criterion were based on age- and race-specific breast cancer incidence rates from the National Cancer Institute's (NCI's) Surveillance, Epidemiology, and End Results (SEER) Program; assessments of risk factors from the Breast Cancer Detection and Demonstration Project (BCDDP); and reports in the literature. RESULTS: Two methods, the exact-age procedure (EAP) and the grouped-age procedure (GAP), were developed. The less precise GAP only requires following a flow diagram. The proportion of white women recommended for screening by the EAP ranges from 10% for 40-year-old women to 95% for 49-year-old women, and the corresponding percentages for black women are 16% and 95%. The assumptions that underlie the guidelines are discussed critically. CONCLUSION: For women or physicians who prefer an individualized approach in deciding whether to initiate regular mammographic screening in the age range of 40 to 49 years, the present report offers recommendations based on individualized risk-factor data and clearly stated assumptions that have an empiric basis. These recommendations can be used to facilitate the counseling process.