Characterization and physical properties of polymethylphenylsilsesquioxane (PMPSQ) and hydroxyl‐functionalized polystyrene (PS–OH) hybrids

Polymethylphenylsilsesquioxane (PMPSQ–OH) and trimethylsilyl end‐blocked PMPSQ (PMPSQ–EC) were prepared. The thermal decomposition behavior of these polymers was studied by thermogravimetric analysis (TGA) and FT‐Raman spectroscopy. Hydroxyl‐functionalized polystyrene (PS–OH) was also prepared by anionic living polymerization. Thin hybrid films of PMPSQ/PS–OH with various blend ratios were obtained by spin‐coating on freshly cleaned glass. The surface morphology of the hybrid films was investigated by atomic force microscopy (AFM). In 80/20 PMPSQ/PS–OH hybrid film, the PS–OH component produced a very uniformly dispersed phase. This hybrid film contained small domains of PS–OH whose size ranged from 60 to 80 nm. As the content of PS–OH was increased, the domain morphology coarsened and phase inversion took place around 50 wt %. In the phase‐inversed system, the PMPSQ‐rich phase was uniformly distributed in the PS–OH‐rich continuous phase. In addition, temperature‐dependent dielectric properties of PMPSQ/PS–OH hybrids were investigated. Relaxation of the hybrids was observed with an increasing content of the PS–OH component due to the amorphous glass transition behavior of PS–OH. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2801–2812, 2003     

Transformation of β-Ni(OH)2 to NiO nano-sheets via surface nanocrystalline zirconia coating: Shape and size retention

Shape and size of the synthesized NiO nano-sheets were retained during transformation of sheet-like β-Ni(OH)₂ to NiO at elevated temperatures via nano-sized zirconia coating on the surface of β-Ni(OH)₂. The average grain size was 6.42 nm after 600 °C treatment and slightly increased to 10 nm after 1000 °C treatment, showing effective sintering retardation between NiO nano-sheets. The excellent thermal stability revealed potential application at elevated temperatures, especially for high temperature catalysts and solid-state electrochemical devices.     

Feasibility of Sludge Ozonation for Stabilization and Conditioning

A pilot-scale sludge treatment plant was built to investigate the feasibility of ozonation processes for waste activated sludge treatment. Ozonation of wastewater sludge resulted in mass reduction by mineralization as well as by supernatant and filtrate recycle. Another advantage of sludge ozonation is a significant improvement of settleability and dewaterability. Experimental results showed that mass reduction of 70% and volume reduction of 85% compared with the control sludge was achieved through the sludge ozonation at a dose of 0.5?gO₃/gDS. It is also interesting to note that the filterability deteriorates up to ozone dose of 0.2?gO₃/gDS and then improves considerably at a higher ozone dose. The filterability could be improved by chemical conditioning even at a low ozone dose. The economic feasibility by cost analysis reveals that ozonation processes can be more economical than other alternative processes for sludge treatment and disposal at small-sized wastewater treatment plants.     

Synthesis and characterization of new aromatic polyimides containing well‐defined conjugation units

A series of aromatic polyimides composed of well‐defined conjugation units were synthesized form 5,5′‐bis(4‐aminophenyl)‐2,2′‐bifuryl (PFDA) and 2,2′‐bis(furyl) benzidine (FurylBZ) with various dianhydrides. The synthesized polyimides emit blue to green light with a quantum yield of 7.3–14.9%, depending on the polymer backbone. In particular, PFDA‐based polymers exhibit extremely narrow photo‐luminescence. The structure, thermal stability, refractive index and dielectric properties of the polymer films were also determined.     

Optimal periodic forcing of nonlinear chemical processes for performance improvements

Unsteady-state periodic operations can improve the optimal steady-state performance of nonlinear chemical processes. To examine if the optimal periodic operation is proper and to obtain the optimal forcing functions subject to various control and state constraints it is suggested in this paper to convert the problems into a form which is suitable for constrained nonlinear programming. The adopted numerical optimization method is based on employing the control parametrization technique and is thus capable of dealing with the problem of multiple input forcings and obtaining optimal forcing functions and/or parameters while subject to general constraints. Besides, it provides information about to what extent the process performance can be improved by adopting the optimal periodic control.     

Modeling of the drying process in paper plants

In this study a model for the drying process in paper production plants was developed based on the mass and heat balances around drying cycles. Relationships for the heat transfer coefficients between the web and the air as well as between the drying cylinder and the web were extracted from the closed-loop plant operation data. It was found that the heat transfer coefficients could be represented effectively in terms of moisture content, basis weight and reel velocity. The effectiveness of the proposed model was illustrated through numerical simulations. From the comparison with the operation data, the proposed model represents the paper plant being considered with sufficient accuracy.     

Dielectric and thermal properties of dicyclopentadiene containing bismaleimide and cyanate ester. Part IV

A novel bismaleimide (BMI), bis(4-maleimidophenoxy-3,5-dimethylphenyl)dicyclopentadiene (DCPDBMI), containing a large dicyclopentadiene (DCPD) and aryl ether linkage, was synthesized from bis(4-aminophenoxy-3,5-dimethylphenyl)dicyclopentadiene and maleic anhydride by the usual two-step procedure that included ring-opening addition to give bismaleamic acid, followed by cyclodehydration to bismaleimide. The monomers were characterized by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (NMR), elemental analyses (EA), and mass spectra (MS). A series of bismaleimide-triazine (BT) resins were prepared from synthesized bismaleimide (DCPDBMI) and then cured with 2,6-dimethyl phenol-dicyclopentadiene dicyanate ester (DCPDCY) at various molar ratios. Thermal properties of cured BT resins (DCPDBMI/DCPDCY) were studied using dielectric analyzer (DEA), dynamic mechanical analyzer (DMA) and thermalgravimetric analyzer (TGA). These data were compared with that of commercial bismaleimide (DDMBMI) cured with bisphenol A dicyanate ester (BADCY). The cured DCPDBMI/DCPDCY exhibits lower dielectric constant, dissipation factor and moisture absorption than those of DDMBMI/BADCY. The effects of blend composition on the glass transition temperatures and thermal stability are discussed.     

Self-aligned fabrication of single crystal diamond gated field emitter array

This paper describes a self-aligned fabrication process for diamond gated field emitter array (FEA). Utilizing the non-conformal coverage sputtering conditions of silicon oxide, an interesting “sphere on cone” structure is formed on diamond nano tip array, which is the key point of gate hole opening process. This structure causes shadowing at certain regions of side-wall during Ti / Au gate metal deposition. Removal of “sphere” by wet etching leads to the successful fabrication of a single crystalline diamond gated FEA. Scanning electron microscope observations reveal the fabrication of a uniform emitter array with tip radius of curvature (20 nm) and gate hole (1.4 μm). We also confirmed that no noticeable physical damage exists on tip. In field emission characteristics of the fabricated single crystal diamond gated FEA, gate voltage control of field emission current is realized.     

Prediction model of compressive strength development of fly-ash concrete

Based on experimental results concerning the compressive strength development of concrete containing fly ash, the authors derived an estimation equation for compressive strength development. The equation can express coefficient , which indicates the activity of fly ash as a binder, in the form of a function of age, fly-ash content, and Blaine specific surface area of fly ash.

This equation is capable of explaining the increases in the early strength due to fly ash in place of part of fine aggregate, the decreases in the early strength due to fly ash in place of part of cement, the increases in the long-term strength due to pozzolanic reaction, the relationship between the fly-ash replacement ratio and the ratio of strength increase/decrease, and the effect of fly ash's Blaine specific surface area on the strength.     

Editing and Synthesizing Two‐Character Motions using a Coupled Inverted Pendulum Model

This study aims to develop a controller for use in the online simulation of two interacting characters. This controller is capable of generalizing two sets of interaction motions of the two characters based on the relationships between the characters. The controller can exhibit similar motions to a captured human motion while reacting in a natural way to the opponent character in real time. To achieve this, we propose a new type of physical model called a coupled inverted pendulum on carts that comprises two inverted pendulum on a cart models, one for each individual, which are coupled by a relationship model. The proposed framework is divided into two steps: motion analysis and motion synthesis. Motion analysis is an offline preprocessing step, which optimizes the control parameters to move the proposed model along a motion capture trajectory of two interacting humans. The optimization procedure generates a coupled pendulum trajectory which represents the relationship between two characters for each frame, and is used as a reference in the synthesis step. In the motion synthesis step, a new coupled pendulum trajectory is planned reflecting the effects of the physical interaction, and the captured reference motions are edited based on the planned trajectory produced by the coupled pendulum trajectory generator. To validate the proposed framework, we used a motion capture data set showing two people performing kickboxing. The proposed controller is able to generalize the behaviors of two humans to different situations such as different speeds and turning speeds in a realistic way in real time.