Electrochemical behavior of magnesium alloys AZ91D,AZCe2, and AZLa1 in chloride and sulfate solutions

The influence of Cl⁻ and SO₄²⁻ on the electrochemical behavior of AZ91D, AZCe2, and AZLa1 was studied. For all alloys, there was a current plateau in the anodic polarization curves in Na₂SO₄ solutions. In 0.5% NaCl solution, there was a small current plateau, whereas there was none in the 3.5% and 5% NaCl solutions. This indicated that SO₄²⁻ is less aggressive than Cl⁻. The range of the current plateau decreased with increasing SO₄²⁻ concentration. For all alloys, the high frequency capacitive loop in the Nyquist plots decreased with increasing concentration consistent with the decrease in corrosion resistance with increasing Cl⁻ and SO₄²⁻ concentration.     

Effect of location in the canopy on the colour development of three apple cultivars during growth

BACKGROUND: Homogeneity in appearance is one of the quality aspects asked for in the supply chain. Decreasing the biological variation in batches of harvested apples (cultivars Braeburn, Fuji and Gala) becomes increasingly important. Skin colour is one of the aspects that determine both optimal harvest and stage of development. Skin colour is affected by location in the canopy. The rules of development of biological variation are now established and will be used on skin colour data. RESULTS: The Minolta colour aspects a*, b* and L* measured before commercial harvest change in a sigmoidal fashion and can be analysed including the biological variation, with a logistic model in indexed nonlinear regression, obtaining explained parts of above 90%. The mechanism of colour change is not affected by state of development or location in the canopy. The location in the canopy affects the intensity of both red and green colouring compounds. The variation in colouration is not affected by the location in the canopy. CONCLUSION: The red‐coloured apple cultivar (Gala) depends more on the location in the canopy than the less‐coloured cultivars (Fuji and Braeburn). The colour development in Fuji apples is considerably slower, with a much larger variation in stage of development. The location in the canopy affects all aspects of biological variation (biological shift factor and asymptotic starting level of colouration) for all three colour aspects L*, a* and b*, but only the mean value, not the standard deviation. The biological shift factors per colour aspects are linearly related. Once induced, variation remains constant during development. Copyright © 2012 Society of Chemical Industry     

The Escherichia coli RecA protein complements recombination defective phenotype of the Saccharomyces cerevisiae rad52 mutant cells

The Saccharomyces cerevisiae rad52 mutants are sensitive to many DNA damaging agents, mainly to those that induce DNA double-strand breaks (DSBs). In the yeast, DSBs are repaired primarily by homologous recombination (HR). Since almost all HR events are significantly reduced in the rad52 mutant cells, the Rad52 protein is believed to be a key component of HR in S. cerevisiae. Similarly to the S. cerevisiae Rad52 protein, RecA is the main HR protein in Escherichia coli. To address the question of whether the E. coli RecA protein can rescue HR defective phenotype of the rad52 mutants of S. cerevisiae, the recA gene was introduced into the wild-type and rad52 mutant cells. Cell survival and DSBs induction and repair were studied in the RecA-expressing wild-type and rad52 mutant cells after exposure to ionizing radiation (IR) and methyl methanesulphonate (MMS). Here, we show that expression of the E. coli RecA protein partially complemented sensitivity and fully complemented DSB repair defect of the rad52 mutant cells after exposure to IR and MMS. We suggest that in the absence of Rad52, when all endogenous HR mechanisms are knocked out in S. cerevisiae, the heterologous E. coli RecA protein itself presumably takes over the broken DNA.     

Animation model of Krško nuclear power plant for RELAP5 calculations

Today most software applications, also in the nuclear field, come with a graphical user interface. The first graphical user interface for the RELAP5 thermal-hydraulic computer code was called the Nuclear Plant Analyzer (NPA). Later, Symbolic Nuclear Analysis Package (SNAP) was developed. The purpose of the present study was to develop SNAP animation model of Krško nuclear power plant (NPP) for RELAP5 calculations with the aim to help analyze the results. In addition, the reference calculations for Krško full scope simulator validation were performed with the latest RELAP5/MOD3.3 Patch 03 code and compared to previous RELAP5 versions to provide verified source data, needed to demonstrate animation model. In total six scenarios were analyzed: two scenarios of the small-break loss-of-coolant accident, two scenarios of the loss of main feedwater, a scenario of the anticipated transient without scram, and a scenario of the steam generator tube rupture. The use of SNAP for animation of Krško nuclear power plant analyses showed several benefits, especially better understanding of the calculated physical phenomena and processes. It can be concluded that an animation tool was created, which enables to analyze very complex accident scenarios. The graphical surface helps keeping the overview and focusing on the main influences. Also, the use of such support tools to system codes may significantly contribute to better quality of safety analysis.     

Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37 °C

The CO₂ partial pressure required to maintain a synthetic body fluid (SBF) at a constant pH, based on the initial bicarbonate concentration, was evaluated to be 0.013 atm for Hank’s solution and 0.083 atm for SBF27. Corrosion of high purity Mg and three Mg alloys in Hank’s solution was studied using hydrogen evolution, weight loss and Tafel extrapolation. The solution pH was maintained constant by CO₂. There was initially an incubation period with a low corrosion rate, a period of increasing corrosion rate, and subsequently steady state corrosion. Some hydrogen dissolved in the Mg metal.     

Structural,mechanical and electrical-contact properties of nanocrystalline-NbC/amorphous-C coatings deposited by magnetron sputtering

Niobium-carbide nanocomposite coatings with a carbon content varying from 43 to 64 at.% were deposited by dual DC magnetron sputtering. X-ray diffraction, x-ray photoelectron spectroscopy and electron microscopy showed that all coatings consisted of nanometer sized NbC grains embedded in a matrix of amorphous carbon. Mechanical properties and electrical resistivity showed a strong dependency on the amount of amorphous carbon (a-C) and NbC grain size in the coating. The highest hardness (23 GPa), elastic modulus (295 GPa) and the lowest resistivity (260 μΩ cm) were measured for the coating with about 15% of a-C phase. Contact resistance measurements using a crossed cylinder set-up showed lowest contact resistance for the coating containing 33% a-C (140 μΩ at a contact force of 100 N), which is comparable to a Ag reference (45 μΩ at a contact force of 100 N). Comparison with TiC-based nanocomposites studied under similar conditions showed that the NbC system has less tendency to form a-C and that lowest contact resistance is obtained at comparable amounts of a-C phase in both material systems (33% for NbC compared to 35% for TiC). With these good electrical contact properties, the NbC nanocomposites can be considered as a potential material for electrical contact applications.     

Self-Management for Access Points Coverage Optimization and Mobility Agents Configuration in Future Access Networks

A key challenge for the management systems of future networks is the reduction of human interventions in the fundamental management functions. These include mechanisms that render the networks capable to configure, optimize, heal and protect itself, but also handle the emerging complexity. Demands for the future internet networks mandate the rapid assessment of the feasibility of such cognitive management architectures that shall bridge the gap between conceptual design and practical network deployments. In this paper, a novel architecture is introduced, based on organized distribution of control feedback cycles at locations allocated across network’s operational elements. Two realisations of self-management in the operations of wired and wireless access network segments are presented. The first one is focused on organization of the wireless access regions in networks by the use of compartments of access points for enabling coverage optimization. A compartment-based approach facilitates the more efficient usage of network resources, exploiting local situation awareness and local optimisation features, according to the varying traffic needs. The second realization shows the control of mobility management processes in wired parts of access networks for balancing utilization of network resources. A dynamic deployment and re-configuration of mobility agents permit to tackle the problem of congestion induced by mobility agents in mobile protocols and combined with a dynamic access router assignment, network resources are efficiently balanced within the network. The paper concludes with findings and recommendations on how common principles of self-management evolve from design theory to practice.     

Calculated phase diagrams,iron tolerance limits,and corrosion of Mg-Al alloys

The factors determining corrosion are reviewed in this paper, with an emphasis on iron tolerance limit and the production of high-purity castings. To understand the iron impurity tolerance limit, magnesium phase diagrams were calculated using the Pandat software package. Calculated phase diagrams can explain the iron tolerance limit and the production of high-purity castings by means of control of melt conditions; this is significant for the production of quality castings from recycled magnesium. Based on the new insight, the influence of the microstructure on corrosion of magnesium alloys is reviewed.     

Controllable Broadband Absorption in the Mixed Phase of Metamagnets

Materials with broad absorption bands are highly desirable for electromagnetic filtering and processing applications, especially if the absorption can be externally controlled. Here, a new class of broadband‐absorption materials is introduced. Namely, layered metamagnets exhibit an electromagnetic excitation continuum in the magnetic‐field‐induced mixed ferro‐ and anti­ferromagnetic phase. Employing a series of complementary experimental techniques involving neutron scattering, muon spin relaxation, specific heat, ac and dc magnetization measurements, and electron magnetic resonance, a detailed magnetic phase diagram of Cu₃Bi(SeO₃)₂O₂Br is determined and it is found that the excitations in the mixed phase extend over at least ten decades of frequency. The results, which reveal a new dynamical aspect of the mixed phase in metamagnets, open up a novel approach to controllable microwave filtering.     

Workload characterization of JVM languages

Originally developed with a single language in mind, the JVM is now targeted by numerous programming languages—its automatic memory management, just‐in‐time compilation, and adaptive optimizations—making it an attractive execution platform. However, the garbage collector, the just‐in‐time compiler, and other optimizations and heuristics were designed primarily with the performance of Java programs in mind. Consequently, many of the languages targeting the JVM, and especially the dynamically typed languages, are suffering from performance problems that cannot be simply solved at the JVM side. In this article, we aim to contribute to the understanding of the character of the workloads imposed on the JVM by both dynamically typed and statically typed JVM languages. To this end, we introduce a new set of dynamic metrics for workload characterization, along with an easy‐to‐use toolchain to collect the metrics. We apply the toolchain to applications written in six JVM languages (Java, Scala, Clojure, Jython, JRuby, and JavaScript) and discuss the findings. Given the recently identified importance of inlining for the performance of Scala programs, we also analyze the inlining behavior of the HotSpot JVM when executing bytecode originating from different JVM languages. As a result, we identify several traits in the non‐Java workloads that represent potential opportunities for optimization. © 2015 The Authors. Software: Practice and Experience Published by John Wiley & Sons Ltd.