Automatisierung

Ohne Zusammenfassung     

Laws of Formation of Electrospark Coatings from Alloys of the Ni – Cr – Al – Y System

The main parameters of electrospark alloying of steel 45 with anodes made from Ni – Cr – Al – Y alloys have been investigated. The anodes were fabricated by casting and hot pressing. The highest values of the mass transfer coefficient were observed in the case of electrospark alloying with hot-pressed alloys. Microstructure and x-ray phase analyses of electrospark coatings revealed the presence of solid solutions based on nickel, iron, chromium as well as intermetallic compounds. Coatings obtained by electrospark alloying with hot-pressed alloy are more wear-resistant than are coatings obtained by alloying with cast alloys.     

Modern Teaching and Training in Metallurgical Engineering

This contribution deals with advanced educational technologies needed to equip customers from higher education institutions, research and industry with efficient tools supporting their work and operating new skills‐training methods. The challenges are reducing the training costs, improving quality and increasing the number of graduates in engineering departments. The concept of a Virtual Lab based on the combination of various teaching methods and tools is presented. Principles of mathematisation in metallurgical education and training are discussed. An example of online course designed in the form of Virtual Lab is demonstrated.     

A new high-order accurate continuous Galerkin method for linear elastodynamics problems

A new high-order accurate time-continuous Galerkin (TCG) method for elastodynamics is suggested. The accuracy of the new implicit TCG method is increased by a factor of two in comparison to that of the standard TCG method and is one order higher than the accuracy of the standard time-discontinuous Galerkin (TDG) method at the same number of degrees of freedom. The new method is unconditionally stable and has controllable numerical dissipation at high frequencies. An iterative predictor/multi-corrector solver that includes the factorization of the effective mass matrix of the same dimension as that of the mass matrix for the second-order methods is developed for the new TCG method. A new strategy combining numerical methods with small and large numerical dissipation is developed for elastodynamics. Simple numerical tests show a significant reduction in the computation time (by 5–25 times) for the new TCG method in comparison to that for second-order methods, and the suppression of spurious high-frequency oscillations.     

Ultrastructure of a bio-electrolytic methanogenic/methanotrophic granular biofilm for the complete degradation of tetrachloroethylene in contaminated groundwater.

The electrolytical methanogenic/methanotrophic coupling (eMaMoC) process was tested in a laboratory-scale single-stage reactor for the treatment of tetrachloroethene (PCE)-contaminated waters. A water electrolysis cell was placed directly in the effluent recirculation loop for the supply of both O2 and H2 to the system: H2 serving as the electron donor for both carbonate reduction into CH4 and reductive dechlorination. The concurrent presence of O2 and CH4 could be used by the methanotrophs for co-metabolically oxidising the chlorinated intermediates left over by the anaerobic transformation of PCE. At a PCE inlet of 33-52 microM and a hydraulic residence time (HRT) of 5.6 days, PCE reductive dechlorination to dichloroethene (DCE) was over 95% with a maximum DCE mineralisation of 83%. Fluorescence in situ hybridisation with 16S rRNA probes related to type I and type II methanotrophic bacteria were utilised to localise the methanotrophic communities in the anaerobic/aerobic granules. It evidenced that with operational time, along with increasing oxygenation rate, methanotrophic communities were specifically colonising onto the outermost layer of the anaerobic/aerobic granule.     

United States Nuclear Regulatory Commission Research Program on molten core debris interactions in the reactor cavity

The NRC's Research Program on Core-Debris/Cavity Interactions comprises two principal elements: (1) an analytical effort focused primarily on development of computer codes needed to predict the potential consequences of risk-significant severe-accident scenarios; and (2) an experimental component to provide insights into the relevant phenomenological processes and to develop the experimental data base necessary for validation of the codes. The analytical activities at Sandia National Laboratories (SNL) focus primarily on refinement and validation of the CORCON and VANESA codes. Two major experimental activities are also based at SNL: (1) the large-scale SURC tests address the thermal-hydraulic phenomena in the cavity as well as aerosol release associated with prototypical core-melt materials in various types of concrete crucibles, while (2) the WITCH and GHOST experiments are concerned with aerosol generation and radionuclide release phenomena. A program of small-scale special-effects tests at Brookhaven National Laboratory (BNL) is coupled to a concomitant model-development and code-validation activity. In addition, measurements are being made at Battelle Columbus Laboratory (BCL) to augment the thermochemical data base needed in the VANESA code to permit refined radiological source-term predictions. The current scope and status of this research is reviewed.     

A 200 MHz CMOS Q-enhanced LC bandpass filter

This paper presents design techniques and performance bounds for implementing Q-enhanced, LC bandpass filters in silicon IC technologies. These filters offer significant advantages over switched capacitor and Gm-C based designs, including higher frequency of operation and lower power consumption for a given dynamic range. A prototype 200 MHz, fourth-order filter implemented in a 2 μm n-well CMOS process is described, and measured performance is compared with theoretical predictions. The prototype filter operates at a selectivity Q of 100 and draws less than 8 mA when operating from 3 to 5 V supplies, making it potentially suitable for use as a first IF filter in modern cellular and PCS receivers     

Probing the substrate alignment at the active site of 15-lipoxygenases by targeted substrate modification and site-directed mutagenesis. Evidence for an inverse substrate orientation

For oxygenation of polyenoic fatty acids by 12- and 15-lipoxygenases the methyl terminus of the substrate constitutes the signal for the initial hydrogen abstraction. In contrast, for 5-lipoxygenases an inverse head to tail substrate orientation has been proposed. However, recent structure-based sequence alignments suggested a conserved uniform substrate orientation for 5S- and 15S-lipoxygenation. Oxygenation of 15S-HETE derivatives by various wild-type and mutant lipoxygenases was investigated, and the evidence proved an inverse substrate orientation: (i) Substrate affinity and Vmax of 15S-HETE oxygenation by arachidonic acid 15-lipoxygenases are >1 order of magnitude lower than the corresponding data for polyenoic fatty acids. 5S,15S- and 14R, 15S-DiH(P)ETE were identified as major reaction products. (ii) Methylation of the carboxylate group of 15S-HETE augmented the reaction rate and shifted the reaction specificity strongly toward 5S-lipoxygenation. In contrast, methyl arachidonate was less effectively oxygenated than the free acid. Methylation of 15S-HETrE(8,11,14), which lacks the C5-C6 double bond, was without major impact on the oxygenation rate and on the product specificity. (iii) Introduction of a bulky glycerol moiety at the carboxylic group of 15S-HETE reversed the kinetic effects of methylation and led to a 14R-oxygenation of the substrate. (iv) When the product pattern of 15S-HETE oxygenation by the recombinant wild-type rabbit 15-lipoxygenase was compared with that formed by the Arg403Leu mutant, 5S- and 8S-lipoxygenations were augmented and 14R, 15S-DiH(P)ETE formation was impaired. (v) Phe353Leu or Ile418Ala mutation of the same enzyme, which favored 12S-HETE formation from arachidonic acid, strongly augmented 8S-lipoxygenation of 15S-HETE methyl ester. These kinetic data and the alterations in the product specificity are consistent with the concept of an inverse head to tail substrate orientation during the oxygenation of 15S-HETE methyl ester and/or of free 15S-HETE by 15-LOXs. For 5S- and 8S-lipoxygenation, 15-HETE may slide into the substrate binding pocket with its carboxy terminus approaching the doubly allylic methylenes C-7 or C-10 to the non-heme iron.     

Limb salvage surgery for widely infiltrating bony sarcomas

OBJECTIVE: To determine whether neoadjuvant chemotherapy and radiotherapy for bony sarcomas extending into soft tissues would allow limb salvage yet maintain local disease control. DESIGN: A prospective cohort study. SETTING: A university-affiliated cancer centre in Alberta. PATIENTS: All patients with potentially curable, widely infiltrating bony sarcomas of the extremity without neurologic deficit, referred to the centre in the 6 years from January 1984 to December 1990. There were 11 patients; 1 did not complete the protocol. The mean follow-up was 24 months. INTERVENTIONS: Adriamycin (doxorubicin) was infused for 3 days at a rate of 30 mg/d. A few days later radiotherapy was given 5 days a week for 10 doses at a rate of 3.0 Gy per dose. Four to 5 weeks later the tumour was excised surgically, with placement of a bone allograft or prosthesis, allowing a 1-cm margin of healthy soft tissue and a 5-cm margin of healthy bone and marrow cavity whenever possible. MAIN OUTCOME MEASURES: Need for limb amputation, infectious complications, recurrence of local or regional disease. RESULTS: One patient underwent amputation after fracture through the tumour site. There were two postoperative infections, one acute and one chronic. All patients had full neurologic function of the distal limb. There was no local or regional recurrence of disease. CONCLUSION: Neoadjuvant chemotherapy followed by radiotherapy and tumour excision provides control of aggressive local bone sarcomas while maintaining limb integrity.