Anionic polymerization of ethylene oxide with cryptates as counterions: 2

A kinetic study of the anionic polymerization of ethylene oxide has been made in tetrahydrofuran at 20°C, with the cryptate Cs⁺ + [TC] as counterion, [TC] being a spheroidal macrotricyclic ligand. Conductance measurements have been made on THF solutions of ?₄BCs + [TC]. Ionic associations higher than cryptated ion pairs are negligible for living end concentrations lower than 3 × 10^?4 moll^?1. k_± and the alkoxide ion pair dissociation constant K_D were determined from both sets of kinetic data obtained with and without added salt knowing the value of k_? from kinetic data performed with K⁺ + [222] as counterion. Free alkoxide ions are about twenty times more reactive than cryptated caesium ion pairs.     

Polymer electrolytes

Summary The room temperature conductivity of lithium salts dissolved in polyethylene oxide, proposed as polymer electrolytes, is shown to decrease drastically upon storage. The crystallization process, which is responsible for that ageing, can be blocked, if two further components are added : an elastomer copolymer butadiene-acrylonitrile and a macromer of polyoxyethylene. In addition, a crosslinking process must be carried out.     

Preparation of optically active poly β-propiolactones

Racemic -methyl--n-propyl--propiolactone is readily polymerized with zinc and cadmium chiral glycolates leading to optically active polyesters. The stereoelectivities observed are lower than for oxiranes and thiiranes with the same initiator system. A value of rotatory power for pure enantiomer _o, is deduced from NMR measurements in the presence of chiral solvent. The structure of polymers is discussed on the basis of NMR results.     

Feeding rats with liposomes or fish oil differently affects their lipid metabolism

Two n‐3 polyunsaturated fatty acid (PUFA)‐rich diets differing in their chemical and physical forms were given to rats during 2 wk. Liposomes [phospholipids (PL) organized in bilayer structures] made from a natural marine lipid extract or a mixture of fats containing fish oil [similar fatty acids esterified in triacylglycerols (TAG)] were used. The influence of n‐3 PUFA dietary sources on plasma parameters, i.e. TAG, cholesterol and PL concentrations, was investigated. A similar hypotriglyceridemic effect of n‐3 PUFA from liposomes or fish oil was observed. In contrast, feeding rats with liposomes led to different PL and cholesterol patterns. In the plasma of rats fed liposomes, total cholesterol amounts were positively correlated with PL levels. Liposome and fish oil feedings caused a marked increase in the amounts of n‐3 PUFA, which occurred mainly at the expense of n‐6 PUFA. However, the enrichment in n‐3 PUFA in the different plasma lipid classes differed substantially when ingested in the form of fish oil or liposomes. These results were interpreted in terms of different lipid bioavailability and metabolic fate during the digestive steps and in the liver, with the dietary source.     

Crack–Tip Toughness of a Soft Lead Zirconate Titanate

Crack–opening displacement (COD) measurements were performed on a commercial lead zirconate titanate (PZT). The intrinsic fracture toughness (or crack–tip toughness) of this material was determined using a new evaluation procedure, which takes into account the near–tip CODs and complete crack profile CODs. The crack–tip toughness K _I0 was determined from an extrapolation of COD data obtained at various loading stages, thus avoiding the complications caused by subcritical crack growth in PZT. Results for plane strain and plane stress condition are presented.     

Corrosion behaviour of brazed multilayer material AA4343/AA3003/AA4343: Influence of coolant parameters

This paper is the second part of a work devoted to corrosion in brazed AA4343/AA3003/AA4343 materials on the water side of automotive heater cores. In the first part of the study [S. Tierce, N. Pébère, C. Blanc, C. Casenave, G. Mankowski, H. Robidou, Electrochim. Acta 52 (2006) 1092], corrosion initiation in the surface layer (i.e. the residual cladding) has been investigated. It has been associated to defective sites in the passive film covering the alloy. The defective sites are linked to α-Al(Mn,Fe)Si particles built up during brazing process. Interactions between α-Al(Mn,Fe)Si particles and the matrix are responsible for the observed behaviour. The present study focuses on the propagation of corrosion through the material in neutral water–ethylene glycol mixtures with and without chlorides. Comparison of the electrochemical behaviour of the three layers of the brazed material (i.e. the residual cladding, the “band of dense precipitates (BDP)” and the core material) revealed that the residual cladding was nobler than the BDP and the core material and thus that the corrosion should propagate through the inner layers due to galvanic coupling: the inner layers constitute the anode and the residual cladding the cathode. Increasing the ethylene glycol content in the water–ethylene glycol mixture decreased the rate of consumption of the materials whereas addition of chloride ions increased it. Mass variation measurements of brazed material in different solutions containing the degradation products of ethylene glycol showed that only glycolate ions had a slight detrimental effect. Corrosion tests performed in heater core tubes allowed the propagation mechanisms to be confirmed.     

Workflows for Heliophysics

In this paper we describe how we have introduced workflows into the working practices of a community for whom the concept of workflows is very new, namely the heliophysics community. Heliophysics is a branch of astrophysics which studies the Sun and the interactions between the Sun and the planets, by tracking solar events as they travel throughout the Solar system. Heliophysics produces two major challenges for workflow technology. Firstly it is a systems science where research is currently developed by many different communities who need reliable data models and metadata to be able to work together. Thus it has major challenges in the semantics of workflows. Secondly, the problem of time is critical in heliophysics; the workflows must take account of the propagation of events outwards from the sun. They have to address the four dimensional nature of space and time in terms of the indexing of data. We discuss how we have built an environment for Heliophysics workflows building on and extending the Taverna workflow system and utilising the myExperiment site for sharing workflows. We also describe how we have integrated the workflows into the existing practices of the communities involved in Heliophysics by developing a web portal which can hide the technical details from the users, who can concentrate on the data from their scientific point of view rather than on the methods used to integrate and process the data. This work has been developed in the EU Framework 7 project HELIO, and is being disseminated to the worldwide Heliophysics community, since Heliophysics requires integration of effort on a global scale.     

Licence de brevet et partage du risque: Résultats de simulation

Annals of Telecommunications - Le partage du risque est une des raisons les plus souvent avancées pour expliquer les clauses financières des contrats de licence. Pour autant, aucune...     

Classical and variational multiscale LES of the flow around a circular cylinder on unstructured grids

The effects of numerical viscosity, subgrid scale (SGS) viscosity and grid resolution are investigated in LES and VMS-LES simulations of the flow around a circular cylinder at Re=3900 on unstructured grids. The separation between the largest and the smallest resolved scales in the VMS formulation is obtained through a variational projection operator and finite-volume cell agglomeration. Three different non-dynamic eddy-viscosity SGS models are used both in classical and in VMS-LES. The so-called small-small formulation is used in VMS-LES, i.e. the SGS viscosity is computed as a function of the smallest resolved scales. Two different grid resolutions are considered. It is found that, for each considered SGS model, the amount of SGS viscosity introduced in the VMS-LES formulation is significantly lower than in classical LES. This, together with the fact that in the VMS formulation the SGS viscosity only acts on the smallest resolved scales, has a strong impact on the results. However, a significant sensitivity of the results to the considered SGS model remains also in the VMS-LES formulation. Moreover, passing from classical LES to VMS-LES does not systematically lead to an improvement of the quality of the numerical predictions.