Application of CO2 laser heating zone drawing and zone annealing to nylon 6 fibers

Nlon 6 fibers were zone drawn and zone annealed by using a continuous wave carbon dioxide laser to develop their mechanical properties. A laser‐heating zone drawing was carried out under a applied tension of 35.4 MPa at a power density of 9.65 W · cm^?2, and then the zone‐drawn fiber was annealed. A laser‐heating zone annealing was carried out in two steps at a power density of 9.65 W · cm^?2; the first step was carried out under 423 MPa and the second under 517 MPa. The treating temperature of the fiber heated by the CO₂ laser was measured by using an infrared thermographic camera equipped with a magnifying lens. The treating temperature at the zone drawing is 138°C, and those at the first and the second zone annealing are 121 and 125°C, respectively. The second laser‐heated zone‐annealed fiber has a birefringence of 65.2 × 10^?3, a degree of crystallinity of 54%, and a storage modulus of 21 GPa at 25°C. Wide‐angle X‐ray diffraction patterns for the laser‐heated zone‐drawn and the zone‐annealed fibers show (200) reflection and (002/202) doublet due to only an α form on the equator. The laser‐heated zone‐drawn fiber has a melting endotherm peaking at 216°C and a trace of shoulder on the higher temperature side of its peak, and the laser‐heated zone‐annealed fibers have a single melting endotherm peaking at 216°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1711–1716, 2002     

Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry     

Heavy oil sorption and recovery by using carbon fiber felts

On fibrous carbon materials, including activated carbon fibers, sorption capacity for heavy oils, less viscous A-grade and more viscous C-grade, was determined. Sorption capacity depended strongly on their bulk density; the correlation was the same as that found previously on exfoliated graphite and carbonized fir fibers. On carbon fiber felts, excellent recycling performance was observed, though sorption capacity was not so high as on exfoliated graphite and carbonized fir fibers. By filtration under suction, about 90% of sorbed A-grade heavy oil could be recovered and no decrease in sorption capacity was detected even after eight cycles. By washing with solvents, n-hexane for A- and C-grade oils and A-grade oil for C-grade oil, almost 100% recovery with no marked reduction in sorption capacity was found for each cycle. For the felts of PAN-based carbon fibers, rather severe operations for oil recovery, centrifugation and squeezing with twisting, could be applied without pronounced decreases in sorption capacity and recovery ratio.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Socially inspired search and ranking in mobile social networking: concepts and challenges

In this paper, we provide an overview of challenges in mobile search and ranking, and envision the fundamental features that should be satisfied. We argue that two principles will help improve the relevance and quality of mobile search and ranking: the first one is to examine both intrinsic content features and context of items (usage statistics and social features, etc.); and the second one lies in that no algorithms can replace the objectivity of a human being—let users define the sites that they feel are relevant, leverage their social networks, and over time see their results become highly personalized. Specifically, wireless-virtualcommunity-based mobile search and ranking architecture is proposed in this paper, in which communities act as a first class abstraction for information sharing. Then, we introduce briefly the potential procedures of achieving high relevance and quality in mobile search and ranking based on wireless virtual community.     

Design methodology of magnetic fields and structures for magneto-mechanical resonator based on topology optimization

Magneto-mechanical resonators—magnetically-driven vibration devices—are used in many mechanical and electrical devices. We develop topology optimization (TO) to configure the magnetic fields of such resonators to enable large vibrations under specified current input to be attained. A dynamic magneto-mechanical analysis in the frequency domain is considered where we introduce the surface magnetic force calculated from the Maxwell stress tensor. The optimization problem is then formulated involving specifically the maximization of the dynamic compliance. This formulation is implemented using the solid-isotropic-material-with-penalization method for TO by taking into account the relative permeability, Young’s modulus, and the mass density of the magnetic material as functions of the density function. Through the 2D numerical studies, we confirm that this TO method works well in designing magnetic field patterns and providing matching between the external current frequency and eigenfrequency of the vibrating structure.     

P2P soft security: On evolutionary dynamics of P2P incentive mechanism

This paper thoroughly investigates the evolutionary dynamics of soft security mechanism, namely, reciprocity-based incentive mechanism, in P2P systems based on Evolutionary Game Theory (EGT). By soft security mechanism, it means social control mechanisms to overcome peers’ selfish (rational) behaviors, and encourage cooperation in P2P systems. Specifically, there exist three strategies in P2P systems: always cooperative (ALLC), always defect (ALLD) and reciprocator (R). Instead of existing work which take it for granted that, like ALLC users, R users did not bear any information-seeking cost, we assume small reciprocation cost, and study generalized mutation-selection dynamics. Our contributions are threefold: firstly, we prove and illustrate that, in a well-mixed P2P structure, ALLD is the only strict Nash equilibrium; secondly, we infer the specific condition under which evolution dynamics exhibits rock-scissors-paper oscillation in a structured P2P population. That is, the population cycles from ALLD to R to ALLC and back to ALLD; finally, we theoretically illustrate that the intensity of selection plays an important role in the evolutionary dynamics of P2P incentive mechanism. That is, when the intensity of selection is relatively weak and reciprocation cost limits to zero, the time average can be mostly concentrated on reciprocator. In brief, considering the existence of reciprocation cost and the small mutation in P2P incentive mechanisms, unlike existing work, it is impossible to simply achieve the “absolute cooperative” in P2P incentive mechanisms. On the other hand, stochastic evolution in P2P incentive mechanism with finite population and network structure still favor reciprocation.     

A Linear Algorithm for Computing the Homography from Conics in Correspondence

This paper presents a study, based on conic correspondences, on the relationship between two perspective images acquired by an uncalibrated camera. We show that for a pair of corresponding conics, the parameters representing the conics satisfy a linear constraint. To be more specific, the parameters that represent a conic in one image are transformed by a five-dimensional projective transformation to the parameters that represent the corresponding conic in another image. We also show that this transformation is expressed as the symmetric component of the tensor product of the transformation based on point/line correspondences and itself. In addition, we present a linear algorithm for uniquely determining the corresponding point-based transformation from a given conic-based transformation up to a scale factor. Accordingly, conic correspondences enable us to easily handle both points and lines in uncalibrated images of a planar object.     

Microstructure and yield strength of UDIMET 720LI alloyed with Co-16.9 Wt Pct Ti

We proposed a new method for developing Ni-base turbine disc alloy for application at temperatures above 700 °C by mixing a Ni-base superalloy U720LI with a two-phase alloy Co-16.9 wt pct Ti in various contents. The microstructure and phase stability of the alloys were analyzed using an optical microscope, a scanning electron microscope, energy-dispersive spectroscopy, and an X-ray diffractometer. The yield strength was studied by compression tests at temperatures ranging from 25 °C to 1200 °C. The results show that all the alloys had a dendritic structure. Ni₃Ti (η) phase was formed in the interdendritic region in the alloys with the addition of Co-16.9 wt pct Ti, and its volume fraction increased with the increase in the addition of Co-16.9 wt pct Ti. The results of exposure at 750 °C show that the addition of Co-16.9 wt pct Ti to U720LI had a great effect on suppressing the formation of σ phase due to the reduced Cr content in the γ matrix. Compared to U720LI, the alloys with the addition of Co-16.9 wt pct Ti possessed higher yield strength. The solid-solution strengthening of γ and γ′ and higher volume fraction of γ′ were assumed to cause this strength increase.