Analysis of adhesive bonded composite lap joints with transverse stitching

The effect of transverse stitching on the stresses in the adhesive is investigated using an adhesive sandwich model with nonlinear adhesive properties and a transverse stitching model for adhesive bonded composite single-lap and double-lap joints. Numerical results indicate that, among all stitching parameters, thread pretension and stitch density have significant effect on the peel stresses in the adhesive; increase in the thread pretension and the stitch density leads to a decrease in peel stress in the adhesive, while an increase in other parameters generally results in a negligible reduction in peel stress. The effect of stitching was found to be negligible on the shear stresses in the adhesive. Thus it is concluded that stitching is effective for the joints where peel stresses are critical and ineffective for those where shear stresses are critical.     

数字程控交换机与专网中的多媒体通信

本文以一个多媒体通信应用VISIT为实例,介绍了多媒体通信在数字程控交换机及专网中的应用情况。     

Angiotensin II regulates the expression of plasminogen activator inhibitor-1 in cultured endothelial cells. A potential link between the renin-angiotensin system and thrombosis

Plasminogen activator-inhibitor C-1 (PAI-1) plays a critical role in the regulation of fibrinolysis, serving as the primary inhibitor of tissue-type plasminogen activator. Elevated levels of PAI-1 are a risk factor for recurrent myocardial infarction, and locally increased PAI-1 expression has been described in atherosclerotic human arteries. Recent studies have shown that the administration of angiotensin converting enzyme inhibitors reduces the risk of recurrent myocardial infarction in selected patients. Since angiotensin II (Ang II) has been reported to induce PAI-1 production in cultured astrocytes, we have hypothesized that one mechanism that may contribute to the beneficial effect of angiotensin converting enzyme inhibitors is an effect on fibrinolytic balance. In the present study, we examined the interaction of Ang II with cultured bovine aortic endothelial cells (BAECs) and the effects of this peptide on the production of PAI-1. 125I-Ang II was found to bind to BAECs in a saturable and specific manner, with an apparent Kd of 1.4 nM and Bmax of 74 fmol per mg of protein. Exposure of BAECs to Ang II induced dose-dependent increases in PAI-1 antigen in the media and in PAI-1 mRNA levels. Induction of PAI-1 mRNA expression by Ang II was not inhibited by pretreating BAECs with either Dup 753 or [Sar1, Ile8]-Ang II, agents that are known to compete effectively for binding to the two major angiotensin receptor subtypes. These data indicate that Ang II regulates the expression of PAI-1 in cultured endothelial cells and that this response is mediated via a pharmacologically distinct form of the angiotensin receptor.     

Electrochemical Investigation on the Formation of Dy-Fe Alloy in Molten Chlorides

ＥｌｅｃｔｒｏｃｈｅｍｉｃａｌＩｎｖｅｓｔｉｇａｔｉｏｎｏｎｔｈｅＦｏｒｍａｔｉｏｎｏｆＤｙＦｅＡｌｏｙｉｎＭｏｌｔｅｎＣｈｌｏｒｉｄｅｓＬｉｕＧｕａｎｋｕｎ（刘冠昆），ＴｏｎｇＹｅｘｉａｎｇ（童叶翔），ＨｏｎｇＨｕｉｃｈａｎ（洪惠婵），Ｙａｎｇ...     

Characterization of dibromopolychlorodibenzo-p-dioxins and dibromopolychlorodibenzofurans in municipal waste incinerator fly ash using gas chromatography/mass spectrometry.

Several fly ash samples from different countries were analyzed for dibromopolychlorodibenzo-p-dioxins and -dibenzofurans (DBPCDD/Fs) using capillary column gas chromatography/high-resolution mass spectrometry. Concentrations of these compounds ranged from low to high parts-per-trillion (pptr) depending on the location where the samples were collected. The mass spectrometer, operated at greater than 10,000 mass resolution in combination with the high resolving power of capillary column GC, permitted characterization of DBPCDD/Fs in municipal waste incinerator fly ash for the first time. The isomer patterns of tetra- through octa-congener groups of DBPCDD/Fs are remarkably similar regardless of where the fly ash originated, indicating common mechanisms of formation of these compounds in the incinerators.     

MPC系统模块结构中的流场研究

本研究中,应用Simple数值计算方法开发了求解MPC系统模块结构中二维流场分布的计算软件。为了验证计算结果的精确性,用多普勒测速仪实测了用有机玻璃制成的MPC模块二维模型的流场,模拟计算结果与实测值对比取得了较好的一致性。四种不同流出角的MPC模块平均总压损失计算结果表明,已开发的软件可作为设计低流阻MPC模块的良好工具。     

The experiment about a plane mirror cavity with dielectric tubes

This paper introduce the experiment about a new type of quasi-optic cavity Making a experimental model, measuring all parameters of the cavity, giving experiment results. It shows that theoritical research in reference[1] is correct Its results coincide with theory. At same time, it also indicates the cavity is hopeful device in MMW.     

四方连续式面料图案的自动生成算法

提出了自动合成四方连续面料图案的数学模型;介绍了人机交互色彩调配算法;从数学模型、色彩处理、应用前景库三方面对有关设计思想和实现方法作了详细说明.     

An efficient assumed strain element model with six DOF per node for geometrically non-linear shells

The present paper describes an assumed strain finite element model with six degrees of freedom per node designed for geometrically non-linear shell analysis. An important feature of the present paper is the discussion on the spurious kinematic modes and the assumed strain field in the geometrically non-linear setting. The kinematics of deformation is described by using vector components in contrast to the conventional formulation which requires the use of trigonometric functions of rotational angles. Accordingly, converged solutions can be obtained for load or displacement increments that are much larger than possible with the conventional formulation with rotational angles. In addition, a detailed study of the spurious kinematic modes and the choice of assumed strain field reveals that the same assumed strain field can be used for both geometrically linear and non-linear cases to alleviate element locking while maintaining kinematic stability. It is strongly recommended that the element models, described in the present paper, be used instead of the conventional shell element models that employ rotational angles.