聚乙烯丙纶复合防水卷材的特点及其应用

介绍了聚乙烯丙纶复合防水卷材的产品结构特点和性能特点、防水系统结构特点和配套材料、应用拼接技术以及产品应用范围。     

Ca^2＋、Sr^2＋掺杂对Pr0.6CaxSr0.4-xFeO3-δ物相、结构及电性能的影响

采用柠檬酸-硝酸盐法合成了碱土金属双掺杂的Pr0.6CaxSr0.4-xFeO3-δ（X=0.0-0.4）系列复合氧化物粉体,用TG-DTA，XRD，FT-IR，SEM等手段对产物中钙钛矿物相的形成及微结构进行了表征,结果表明，样品在800℃焙烧2h后显现钙钛矿结构的主要衍射峰；随热处理温度的升高，XRD谱峰强度逐渐增大，1000℃煅烧2h即得到正交钙钛矿结构的单相固溶体；系列样品结晶化程度和晶粒尺寸随样品中Ca含量的增大而减小；电导率测试结果表明，Ca^2＋、Sr^2＋双掺杂样品的电导率随Sr^2＋含量的增大而增大，低温段（T≤650℃）烧结陶瓷体的导电行为遵循小极化子导电机制。     

煤系高岭土制备裂化催化剂的探索性研究

从石嘴山煤系高岭土的分析测实,经过改性处理,实验后得出具有碱改性条件,且制备裂化催化剂后重油转化能力有明显提高,开拓了煤系高岭土在石化领域的应用。     

芳烃抽提装置技术改造

由于中国石化锦西石化分公司600kt／a连续重整装置的建设，芳烃抽提装置的原料由原来的脱戊烷油变为Ce组分。为此，对抽余油水洗塔和芳烃分离部分的苯塔塔盘，以及苯塔塔顶和塔底抽出部分进行了改造，更换部分机泵和增加变频泵，并将常规仪表改为DCS控制。改造后装置实现一次开车成功，生产出合格产品。抽余油中总芳烃含量小于0．1％，苯回收率达到99%以上。     

An Algorithm For Selecting a Generator of Z_p

How to select a generator of Zp* is an important problem in cryptographic applications, where p is an odd prime. In this paper, we mainly consider the especial case that p is a safe prime, and give an algorithm for selecting a generator of Zp*,and find all generators of Zp* , where p is a safe prime. Our algorithm is more faster than the algorithm in [1]. Based on the proposed algorithm, one could find all generators of Zp* as well, where p is a perfect prime.     

基于IPSec的移动IP安全通信

移动IP使得移动主机在不同网络间不断移动过程中仍能保持正常的通信,而不需要重新建立TCP连接。IPSec是一个对IP层提高安全服务的协议,两者的结合将大大提高移动IP通信的安全性。本文就IPSec在IPv4网络移动IP安全通信的应用做了一些探讨,并对实例进行了安全分析。     

传感技术与RFID在血液管理分析中的运用

由于血液管理对于环境条件的特殊要求，针对血液管理分析提出了将传感技术与RFID技术结合后应用于其中的想法。简要介绍了RFID传感器标签的设计，分析了将其运用于血液管理分析后对加强流程监控、提高工作效率的好处，并主要从血液的出入库管理、跟踪管理、质控管理三个方面详细描述，阐明了方法的可行性。     

Extracting Modes of Constrained Structure with Elastic Supports from Free Test Data

The dynamic flexibility (DF) and improved dynamic flexibility (IDF) methods can be applied to extract constrained structural modes from free-free modal test data. The residual flexibility method is also good for boundaries of constrained structure with rigid supports. Under elastic support boundary conditions both the DF and residual flexibility methods cannot produce accurate results. This paper expands the previously published IDF method to become a more general approach for structural design engineers. A new method called the general dynamic flexibility (GDF) method has been developed in this paper to extract constrained structural modes from free test data. The GDF method can always be applied as follows: (1) when the boundary support stiffness is very stiff, the GDF method can accurately obtain results from rigid support as by Liu et al. in 2001 and Zhang and Wei in 2003; (2) when the support stiffness is soft, the present method can produce results similar to those free-free modal parameters measured by hanging structures using rubber band; (3) when the support stiffness is zero, the method can reproduce true free-free modal parameters; and (4) when the support stiffness has any finite values, the GDF method can also achieve satisfactory results for engineering use. The algorithm included in the GDF method converges rapidly and is numerically stable in the analysis. This feature is very practical for many engineering applications for using the GDF method.     

Free-Edge and Ply Cracking Effect in Angle-Ply Laminated Composites Subjected to In-Plane Loads

This paper presents a semianalytical method for the prediction of interlaminar stresses and displacements near the free edges and ply cracks in general angle-ply laminates subjected to biaxial extensions and/or in plane shear deformation. The method is based on a state space representation of the three-dimensional equations of elasticity. Numerical solutions are obtained by using layer refinement in the through thickness direction and Fourier series expansion in the other directions. By this approach, an angle-ply laminate may be composed of an arbitrary number of monoclinic layers and each layer may have different material property and thickness. This method guarantees continuous fields of all interlaminar stresses across interfaces between material layers. Numerical results are compared with those obtained from other methods. It is found that the theory provides a satisfactory approximation to the stress singularities near the free edges and ply cracks. Numerical solutions for antisymmetric laminates under extension and general laminates under shearing are new in the literature and can be used as benchmarks for validating new models.