Temperature Dependence of Ultra-Low-Frequency Dielectric Relaxation of Barium Titanate Ceramic

Based on a linear voltage ramp method, ultraslow dielectric relaxation of undoped BaTiO₃ ceramic has been carefully measured over the temperature range between − 180° and +120°C. Temperature dependence of the dielectric constant in the frequency range from 10 ⁻⁵ to 10⁻¹ Hz can be obtained using Kramers–Kronig equations. Close to the Curie temperature, the dielectric constant increases so rapidly that the Curie peak is overwhelmed. Two kinds of relaxation processes were observed in this experiment. Ferroelectric domain and mobile charge are proposed to be responsible for the relaxation over the temperature range. With temperature increasing, Maxwell–Wagner relaxation associated with mobile charge gradually dominates. From relaxation time constants at various temperatures, relaxation activation energies about 0.06 and 0.09 eV are identified.     

锗酸铋（Bi4Ge3O12）单晶热物理性质的研究

本文用不同的测试技术和方法测定了锗酸铋(BGO)单晶的比热(300～800K)热膨胀系数(100～1100K)和导温系数(140～700K),进而导出了 BGO 单晶不同温度下的导热系数、定容比热、德拜温度和格虑内森数。本文还对 BGO 单晶热物理性质的变化规律作了理论解释。     

瓦斯燃烧器回流区测试

燃烧器流场内回流区的大小和形状决定了燃烧火焰的稳定性 ,利用APV激光测速系统 ,在燃烧器冷态测试实验装置上对一瓦斯燃烧器冷态模型的流动进行了研究 ,发现了该燃烧器流场内的双回流区结构 ,并得到了中心回流区尺寸与稳焰器结构的关系 ,为该结构类型燃烧器的稳焰设计及稳焰能力的评价提供了实验依据     

光隔离器及其相关的磁光材料

本文简要介绍了磁光隔离器的理论、结构和分类 ,并提出了该器件今后发展的几个问题 ,最后介绍了几种磁光材料     

发动机连杆螺纹孔加工质量的改进

对发动机连杆螺纹孔在攻丝过程中出现烂牙、粗糙度差等加工质量问题进行了分析，提出了解决问题的方法，使连杆的合格率行到显著的提高。     

偏振模色散统计特性的研究

利用动态方程研究了偏振模色散矢量的统计特性 ,分别用统计系综和频率系综两种方法进行数值模拟。数值结果表明 ,统计系综和频率系综两种方法的结果一致。在大归一化距离条件下 ,均方根时延的平方随归一化距离线性变化 ;偏振模色散矢量的各个分量服从高斯分布 ,差分群时延服从麦克斯韦分布 ;偏振模色散矢量弥散于整个邦加球     

纳米4-H碳化硅薄膜的掺杂现象

对纳米晶SiC薄膜进行了P和B的掺杂,B掺杂效率比P高,其暗电导预前因子与激活能遵守Meyer-Neldel规则,并有反转Meyer-Neldel规则出现.掺杂效率比非晶态碳化硅薄膜高是纳米碳化硅薄膜的特点之一.非晶态中的隧穿和边界透射对输运有一定贡献.     

近非临界相位匹配温度调谐MgO：LiNbO3OPO

通过对MgO:LiNbO3参量过程温度相位匹配及走离角，允许参量等运转参数的理论计算与分析，确定了晶体的切割角度θ=82℃，以近非临界相位匹配（NCPM）取代NCPM，将温度调节范围控制在较低的温度上，研制了532nm泵浦的MgO:LiNbO3温度调谐脉冲光学参数振荡器（OPO），在800～1700nm波段实现连续调谐输出。参量泵浦功率密度阈值为57.3MW/cm^2，泵浦能量约2倍阈值处，单谐振（SRO）参量转换效率为11%以上。     

Manufacture of carbon fibers from polyacrylonitrile precursors treated with CoSO4

Free‐radical solution copolymerization of itaconic acid and acrylonitrile was carried out in DMSO using azodiisobutyronitrile as an initiator, changing the feed rate of itaconic acid. The resulting polymerization solution was spun to form polyacrylonitrile (PAN) precursors of carbon fibers. The precursors were treated with a CoSO₄ aqueous solution on‐line. The structure and properties of untreated and treated PAN precursors and the resultant carbon fibers were characterized by SEM and TEM, a stabilization process, etc. It is suggested that CoSO₄ acts as a catalyst in the formation of a ladder structure and reduces the temperature of cyclization, and the carbon fibers developed from treated PAN fibers showed improvement in the tensile strength and the Young's modulus. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 153–158, 2002