高效液相色谱法测定止痛养胃软胶囊中延胡索乙素的含量

测定止痛胃软胶囊中延索乙素的含量,可用高效液相色谱法。选用甲醇—磷酸缓冲溶液(40∶60)为流动相,测定波长280nm。结果:延胡索乙素浓度在0.02140～1.37mg/mL范围内,与峰面积线性关系良好,y=(8.390×106)x+7.505×103(r=0.9997)。结论:该法操作简便、快捷、特异性强,可用于控制止痛养胃软胶囊的质量。     

粤北某市"土法炼砷"土壤中化学砷污染的研究

粤北某市“土法炼砷”造成的砷污染,严重破坏了当地生态环境,而且砷还会进入河流或地下水,严重威胁了当地及北江下游的饮用水安全和生态安全。本文对“土法炼砷”遗址现场进行调查取样,并对砷污染的特点进行了分析。     

New approach for the preparation of nanoporous polyorganosilicate low‐k films

The distribution of pores and the mechanical properties of materials are the key factors in preparing satisfactory low‐k films. In the present study, a kind of silsesquioxane‐polyethylene glycol (SSQ‐PEG) was synthesized and used as a template to make the distribution of pores more even in the low‐k films. The crosslinking density of films could be adjusted by the sol‐gel of tetramethoxysilane/dimethoxydimethylsilane with various proportions. The porosity of films could also be adjusted with different proportions of pendant PEG chains introduced. A dielectric constant as low as 2.1 had been achieved for nanoporous polyorganosilicate films with good tenacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1238–1243, 2007     

Effects of Additive on the Microwave Synthesis of AlN Powder

In this paper, a series of aluminum nitride powders were synthesized using a microwave synthesis method with various additives. The effects of additives on the nitridation of aluminum powder by microwave processing were studied. The results showed that the pure AlN powder with regular and fine grains could be obtained at a temperature of 1050°C for 30 min by the mixed additive under atmospheric pressure of nitrogen. The mixed additive composed by ammonium fluoride and zinc granules played a vital role in the microwave synthesis process.     

煤锅炉制粉系统改造总结

阐述中石化九江分公司2台煤锅炉制粉系统若干改造,介绍原煤仓、磨煤机系统、木块分离器、粗粉分离器、制粉管道及锁气器、制粉冷却水系统等改造的成功经验,并对此改造进行分析和评价.     

生物陶瓷内部成孔与贯通方式的研究

多孔羟基磷灰石（HA）陶瓷内部结构满足细胞向内部渗透、迁移、粘附和生长的条件。实验探讨了HA陶瓷内部成孔与孔道连结的机理与技术，采用添加制孔剂和固化纤维2种方法制备系列样品，测算了样品气孔率，并对微观结构进行扫描电镜观察，最终确定可人工调控内部结构的HA陶瓷成孔与贯通技术。     

化学微交联聚氯乙烯的结构和性能

通过氯乙烯/邻苯二甲酸二烯丙酯(VC/DAP)悬浮共聚,合成了含部分凝胶结构的化学微交联PVC树脂,对微交联PVC的玻璃化转变行为、加工性能、消光性能、加热-形变行为和力学性能进行了研究。当DAP用量在0.25%mol以下时,PVC的玻璃化温度变动不大。凝胶含量的增加将导致交联PVC_d~T的光泽度下降,消光性能提高;塑化时间和加工扭矩均增加,加工性能急剧变差;加热变形值下降,最高使用温度提高。凝胶对PVC拉伸性能的影响较为复杂,但压缩永久变形则随凝胶含量的增加而下降,材料的弹性性能逐渐提高。     

高聚合度聚氯乙烯的加工性能

本文对高聚合度聚氯乙烯(H-PVC)的发展及其优异的物理机械性能作了简要介绍;着重分析了H-PVC的加工性能和表征方法,并讨论了分子特性和颗料特性及加工组成、加工条件对加工性能的影响,提出了改进H-PVC加工性能的方法。     

沙漠风积沙地基扩展基础抗拔现场试验研究

通过在新疆、宁夏和内蒙古典型沙漠地区完成的现浇混凝土和装配式2种扩展基础在上拔、上拔与水平力组合工况下的25个现场试验,获得了风积沙扩展基础抗拔荷载-位移曲线,并确定了各试验基础的抗拔极限承载力。按照"土重法"计算原理,得到了反映沙漠风积沙地基抗拔承载性能的极限"上拔角"。经统计分析,得到沙漠风积沙极限"上拔角"标准值为16.8°,该值考虑了沙漠风积沙的区域特征、基础型式与尺寸、荷载工况等因素,可为沙漠地区输电线路杆塔基础的工程设计提供依据。     

The SMSI between supported platinum and CeO2–ZrO2–La2O3 mixed oxides in oxidative atmosphere

CeO₂–ZrO₂–La₂O₃ (CZL) mixed oxides were prepared by citric acid sol–gel method. The as-received gel was calcined at 500, 700, 900 and 1050 °C to obtain the so-called C5, C7, C9 and CK, respectively. The C5, C7 and C9 powders were impregnated with H₂PtCl₆ and then calcined at 500 °C to prepare P5C5, P5C7 and P5C9, respectively. The impregnated CK powders were calcined at 500, 700 and 900 °C to prepare P5CK, P7CK and P9CK, respectively. The XRD and XPS analyses show that the surface distribution of Pt is evidently influenced by the structural and textural properties of the support. The CO adsorption followed by FTIR reveals that the dispersion and the chemisorption sites of Pt are reduced as the calcination temperature of CZL support increases. The chemisorption ability of the CK samples is even completely deactivated. The encapsulation mechanism, which has been applied to explain the so-called strong metal–support interaction (SMSI) after reductive treatment, is introduced here to demonstrate the abnormal observations though the samples were prepared in oxidative atmosphere. The HRTEM results also confirm this explanation. The effects of oxygen vacancies, the chemisorption sites on the Pt surface and Pt/Ce interfacial sites on the three-way catalytic activities are discussed.