An analytical method for the calculation of static characteristicsof linear step motors for control rod drives in nuclear reactors

An analytical method for calculating static characteristics of linear dc step motors (LSM) is described. These multiphase passive-armature motors are now being developed for control rod drives (CRD) in large nuclear reactors. The static characteristics of such LSM is defined by the variation of electromagnetic force with armature displacement and it determines motor performance in its standing and dynamic modes of operation. The proposed analytical technique for calculating this characteristic is based on the permeance analysis method applied to phase magnetic circuits of LSM. Reluctances of various parts of phase magnetic circuit is calculated analytically by assuming probable flux paths and by taking into account complex nature of magnetic field distribution in it. For given armature positions stator and armature iron saturations are taken into account by an efficient iterative algorithm which gives fast convergence. The method is validated by comparing theoretical results with experimental ones which shows satisfactory agreement for small stator currents and weak iron saturation     

Long-wavelength infrared photoinduced switching of a resonanttunneling diode using the intersubband transition

Voltage switching induced by long-wavelength infrared light from a CO₂ laser was observed using a double-barrier resonant tunneling diode (RTD) biased in the bistable region and the intersubband transition (IT) between the quantum confined states. Possible optoelectronic and all-optical switching applications involving hysteresis are proposed and discussed     

Rotative quadrature phase-shift keying

A rotative quadrature phase-shift keying (RQPSK) modulation scheme is proposed. By rotating the QPSK signal constellation by pi /2 either clockwise or anticlockwise during a symbol duration, the conventional QPSK scheme can be modified to transmit 3 bits per symbol to achieve both power and bandwidth efficiency.<>     

Medical-grade acrylic adhesives for skin contact

Pressure-sensitive acrylic adhesives for application to skin are made from 2-ethylhexyl acrylate, isooctyl acrylate or n-butyl acrylate copolymerized with polar functional monomers such as acrylic acid, methacrylic acid, vinyl acetate, methyl acrylate, N-vinylcaprolactam, or hydroxyethyl methacrylate. Functional comonomers increase cohesive strength, provide surface polarity, and enhance wear performance. Tack, adhesion to skin, adhesive transfer to skin, and wear performance of the adhesive are governed by the molecular weight, glass transition temperature, and the viscoelastic behavior of the adhesive. Viscoelastic properties of the adhesive as measured by the Williams plasticity number (WPN), dynamic storage modulus (G′), dynamic loss modulus (G″), and tan δ are important polymer properties for good wear performance. Sweating skin, a moist environment, and physical activity are the most important factors influencing the failure of an adhesive tape during wear. A medicalgrade adhesive for application to human skin should be hypoallergenic. Medical-grade adhesives are utilized in making surgical tapes for holding dressings in place, adhesive bandages, adhesive dressings to cover wounds, and surgical operating drapes.     

Ultrasonic welding using tie-layer materials. part II: Factors affecting the lap-shear strength of ultrasonic welds

The influence of tie-layer Melt Flow Index on the lap-shear strength of ultrasonic welds in oriented polypropylene (OPP) has been evaluated. The tie-layer Melt Flow Index was varied from 0.03 dg/min to 2600 dg/min; the highest lap-shear strength properties were obtained using tie-layers that had melt flow index values between 30 and 100 dg/min. When using low Melt Flow Index tie-layers, hot spot formation and concomitant changes in fusion zone and heat-affected-zone dimensions produced stress concentrations that promoted failure in oriented polypropylene material away from the bondline region. When very high Melt Flow Index (2600 dg/min) tie-layers were used, the mode of failure during lap-shear testing was a mix of cohesive, in oriented polypropylene, and adhesive failure. The molecular weight of material at the bondline was not markedly affected by the thermal cycle produced during ultrasonic welding. Only the flash ejected when using low Melt Flow Index tie-layers exhibited any evidence of degradation; it is suggested that the ejected flash may have been degraded because of a combination of thermal, cavitation, and thermo-oxidative processes.     

PMMA tacticity and alumina powder dispersion stability

Summary Sedimentation experiments and X-ray photoelectron spectroscopy (XPS or ESCA) analyses have been used to study the effect of poly(methylmethacrylate) (PMMA) tacticity on aluminum oxide powder dispersion stability in a common solvent medium. The relative trends from sedimentation densities, and from surface analyses after solvent washing show that (PMMA) adsorption is greatest with isotactic polymer, where isotactic>atactic>syndiotactic adsorption. These results suggest that surface adsorption and hence dispersion stability can be influenced by polymer chain configuration as well as by chain conformation.     

Two-electrode DFB laser filter used as a wide tunable narrow-bandFM receiver: tuning analysis, characteristics and experimental FSK-WDMsystem

Characteristics of a two-electrode DFB laser filter are studied both theoretically and experimentally. Using a matrix analysis of spontaneous emission, a continuous tuning range of 6.7 Å is achieved by changing both net field gains of the two electrodes. A total discontinuous tuning range of over 10 nm comprising alternating mode jumps and continuous tuning range of 4 Å are measured experimentally. The laser filter presents a FWHM bandwidth of 5 GHz which depends on the optical input power. In addition, it is demonstrated that a DFB laser filter can act as a frequency discriminator/photodetector, i.e., a narrow-band FM receiver, with a uniform bandwidth of 1.5 GHz. Using the two-electrode DFB laser for both transmitter and receiver, a two-channel FSK-WDM transmission system utilizing the discontinuous tuning range is reported. The advantage of such a device is the simplicity as compared to the heterodyne technique     

THE OPTIMUM SPEED OF VISUAL INSPECTION USING A RANDOM SEARCH STRATEGY

Choosing a standard speed for visual inspection is difficult using standard work measurement techniques. This paper uses a different approach, taking a model of human functioning in inspection and deriving an optimum speed of working so as to balance the cost of time against the cost of errors. Random search is used as the model and both self-paced and externally-paced conditions are derived for multiple fault types. Optimization using a Golden Section search is used to provide optimum inspection speed.     

A new bubble-point-pressure correlation for the binary LiBr/H2O solution

In accord with the increasing concern about the global environmental issues, the absorption refrigeration heat-pump systems are currently being considered very promising and attractive. For the purpose of supporting the advanced R&D technology in this area, we have developed a novel correlation to represent the bubble-point pressures of LiBr H₂O solutions. The developed correlation covers the most extensive range of validity ever proposed: 273–483 K for temperatures, 0.05 kPa to 1.0 MPa for pressures. and 29 76 wt% LiBr for concentrations.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994. Boulder, Colorado, U.S.A.