Analysis of weakly guiding cladded acoustic fibers of hexagonal crystal symmetry

An approximate analysis of the weakly guiding cladded acoustic fiber consisting of a core and infinite thick cladding both with hexagonal crystal symmetry is presented. The crystalline Z axis is parallel to the fiber axis. Weak guidance conditions require that the stiffness constants of the core are slightly less than those of the cladding, and the density of the core and cladding are almost the same. Approximate dispersion and cutoff equations are derived for all pure guided modes. Dispersion curves of several lower-order guided torsional, radial-axial and flexural modes are evaluated using both exact and approximate formulas and they are in good agreement. A simple approximate dispersion equation for leaky (longitudinal-type) modes is also obtained.     

Intermediate temperature solid oxide fuel cell based on fully integrated plasma-sprayed components

This work addresses the fabrication of membrane-type solid oxide fuel cells (SOFCs) operating at medium temperatures, where all components are fabricated by plasma spray technology, and the evaluation of the performance of the SOFC single unit in a temperature range of 500 to 800 °C. Single cells composed of LaSrMgO₃ cathodes, LaSrGaMgO₃ (LSGM) electrolytes, and Ni/yttria-stabilized zirconia anodes were fabricated in successive atmospheric plasma-spraying processes. Plasma-spraying processes have been optimized and tailored to each layer to achieve highly porous cathode and anode layers as well as high-density electrolyte layers. A major effort has been devoted to the production of the LSGM electrolyte that has a high density and is free of cracks. Electrochemical impedance spectroscopy was used to investigate the conductivity of the electrode layers, and particularly the resistance of the electrolyte layer. It revealed that the heat treatment had a great influence on the specific conductivity of the sprayed electrolyte layers and that the specific conductivity of the heat-treated layers was dramatically increased to the same magnitude as is typical for sintered LSGM pellets. The experimental results have demonstrated that the plasma-spraying process has a great potential for the integrated fabrication of medium-temperature SOFC units. The original version of this article was published as part of the ASM Proceedings, Thermal Spray 2003: Advancing the Science and Applying the Technology, International Thermal Spray Conference (Orlando, FL), May 5–8, 2003, Basil R. Marple and Christian Moreau, Ed., ASM International, 2003.     

The T Cell Repertoires from Nickel Sensitized Joint Implant Failure Patients

Nickel (Ni²⁺) is one of the most common allergens, affecting around 10–15% of the general population. As the demand for orthopedic implant surgery rises, the number of surgical revisions due to joint implant failure also increases. There is evidence that some patients develop joint failure due to an immune response to a component of the implant, and we have found that Ni²⁺ is an especially important cause. Hence, understanding the mechanisms by which Ni²⁺ allergy induces joint implant failure becomes a critical research question. The structural basis of Ni²⁺ activation of pathogenic T cells is still not clear. The purpose of this study was to characterize Ni²⁺-reactive T cell repertoires derived from the peripheral blood of joint failure patients due to Ni²⁺ sensitization using single-cell sequencing techniques. We stimulated the proliferation of Ni²⁺ -reactive T cells from two implant failure patients in vitro, and sorted them for single-cell VDJ sequencing (10× genomics). We identified 2650 productive V-J spanning pairs. Both TCR α chains and β chains were enriched. TRBV18 usage is the highest in the P7 CD4+ population (18.1%), and TRBV5-1 usage is the highest in the P7 CD8+ population (12.1%). TRBV19 and TRBV20-1 segments are present in a high percentage of both P7 and P9 sequenced T cells. Remarkably, the alpha and beta chain combination of TRAV41-TRBV18 accounts for 13.5% of the CD4+ population of P7 patient. Compared to current Ni specific T cell repertoire studies of contact dermatitis, the Vα and Vβ usages of these joint implant failure patients were different. This could be due to the different availability of self-peptides in these two different tissues. However, TRBV19 (Vβ17) was among frequently used TCR β chains, which are common in previous reports. This implies that some pathogenic T cells could be similar in Ni²⁺ hypersensitivities in skin and joints. The alignment of the TCR CDR3β sequences showed a conserved glutamic acid (Glu) that could potentially interact with Ni²⁺. The study of these Ni²⁺ specific TCRs may shed light on the molecular mechanism of T cell activation by low molecular weight chemical haptens.     

致密油藏直井多层缝网压裂产量递减分析

垂向多层发育的致密油藏常采用缝网压裂进行开采,从而改善储层渗透率,提高油井产量。为此建立直井多层缝网压裂不稳定渗流数学模型,压裂后各层划分为人工裂缝区、改造区和未改造区。绘制分析Blasingame产量递减典型曲线,曲线分为7个流动阶段,总裂缝长度一定时,裂缝半长短的储层流体渗流率先到达未改造区,流体渗流阻力大,Blasingame曲线靠下;总改造体积一定时,各层改造体积差异越大,Blasingame曲线越靠下。用所建立的模型,对实测生产资料进行解释,获得各层裂缝半长、改造区渗透率等相关地层参数,该模型对进行多层缝网压裂直井产量分析具有指导意义。     

Preparation of High Strength and Toughness Aramid Fiber by Introducing Flexible Asymmetric Monomer to Construct Misplaced-Nunchaku Structure

High performance fibers with high strength and toughness have great potential in composites, but contradiction between tensile strength and elongation at break makes the preparation to become a current challenge. Herein, an asymmetric structure of more flexible diamine, 3,4′-diaminodiphenyl ether (3,4′-ODA), is introduced into heterocyclic aramid (PBIA) fibers to replace rigid symmetric p-phenylenediamine (PDA). By studying the properties of copolymer (mPEBA) fibers with different ratios of diamine, it is found that the mPEBA fiber reached the optimal mechanical properties with the 30% content of 3,4′-ODA. Compared with homopolymerized heterocyclic aramid fibers, the tensile strength and elongation at break of mPEBA fiber are improved by 26.2% and 38.7%, respectively. Results of X-ray diffraction show that the introduction of 3,4′-ODA structure can increase stretchability of mPEBA fibers, improving the orientation degree during hot-drawing. Molecular dynamics simulations confirm that 3,4′-ODA structure undergoes a conformation transformation to form a straightened chain during hot-drawing, while symmetrical 4,4′-diaminodiphenyl ether (4,4′-ODA) cannot form the same conformation. The misplaced-nunchaku structure is formed based on the special meta-para position of 3,4′-ODA, achieving the synergy of high strength and high toughness.     

Zirconium-Embedded Polyhedral Oligomeric Silsesquioxane Containing Phosphaphenanthrene-Substituent Group Used as Flame Retardants for Epoxy Resin Composites

A zirconium hybrid polyhedral oligomeric silsesquioxane derivative (Zr–POSS–bisDOPO) is synthesized by the corner-capping and Kabachnik–Fields reactions. It is characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR), and then used as a flame retardant in diglycidyl ether of bisphenol A (DGEBA) to endow epoxy resin (EP) with flame retardancy. The flame retardancy, thermal stability, and mechanical properties of the cured EP/Zr–POSS–bisDOPO composites are investigated. The results show that when Zr–POSS–bisDOPO is added by 5–7 wt%, the EP/Zr–POSS–bisDOPO composites pass the UL-94 V-0 rating test. In addition, they have a better flame-retardant effect than pure EP. The combination of Zr atom embedded in the Si O cubic cage and the two phosphaphenanthrene substituent groups in one corner of cubic cage is expected to realize the Zr/Si/P ternary intramolecular hybrid synergistic effect and achieve the possibility of dispersing metal–POSS cages at a sub-micrometer-scale level into polymer matrix. It also proves that Zr–POSS–bisDOPO produces phosphorus-containing free radicals and terminates the chain reactions in gas phase. Meanwhile the Si O Si and Zr O units are retained in the solid phase, which promote the char formation and enhance the flame retardancy. This kind of Zr-doped POSS will be helpful for developing the new metal–POSS hybrid flame-retardant and polymer composites.     

Bioderived Bilayer Shell Modification β-FeOOH Nanorods via Self-Assembly Technique as Sustainable Flame Retardants for Enhancing Flame Retardancy of Epoxy Resin

The design and application of bioderived flame retardants have been widely conducted to meet the concept of green and sustainable development. Here, self-assembly technique is used to prepare core–shell bioderived additives by using β-FeOOH as the core and polydopamine (PDA)/tannic acid (TA) bilayer as the shell, following adsorption of nickel ions to enhance the thermal stability, flame retardancy, and mechanical properties of epoxy resin (EP). The molecular structure of biobased resources is rich in hydroxyl groups and carbon content, which can be dehydrated and carbonized during combustion and promote the formation of robust protective char layer. With the addition of 5 wt% β-FeOOH@PTNi, the EP composites can pass V-0 rating in the UL-94 test. The peak heat release rate and total heat release decrease by 28.4% and 17.4% compared with pure EP. The bioderived nanorods can capture the oxygen free radicals, contributing to flame retarding in gaseous phase. Thus, the release of high-toxic CO and flammable gaseous is significantly suppressed. Besides, the storage modulus of EP composites increases by 16.0% with the addition of 5% β-FeOOH@PTNi compared with pure EP. This work provides a sustainable methodology for the design of bioderived flame retardants for EP.     

Crude Wax Extracted from Rice Bran Oil Improves Oleogel Properties and Oxidative Stability

Crude wax extracted from rice bran oil (RBO) is used to improve the oleogel properties and oxidative stability of RBO. The effect of crude rice bran wax (CrBW) on the formation characteristics and oxidative stability of oleogels is discussed. The results show that oleogels can be formed with 7.0 wt% CrBW at 20 °C. As the concentration of CrBW increases from 7.0 to 11.0 wt%, the hardness and solid fat content (SFC) of the oleogels increase significantly, and the oleogels are primarily β' crystals. Moreover, oleogel crystals formed with 5 and 7 wt% CrBW are flocculent; when the amount included is 9%, the oleogel crystals are transformed into long dendrites, and the density rises. After 90 days of storage at 20 °C, the peroxide value of oleogels formed with 9.0 wt% CrBW slowly rises from 3.21 to 6.52 mmol kg⁻¹. Practical Applications: Oleogels prepared here by CrBW and RBO are an innovative structural lipid without trans fats. Useful information on the rich fats and nutrients in CrBW is provided, which reduces the production cost and improves the industrial production capacity.     

DD—921钢铁常温发黑剂的研制和应用

研究了钢铁常温发黑过程的成膜机理,各组分之间的作用以及相互之间的影响,着重分析了常温发黑的优缺点,工艺控制参数以及经济性。     

DECOMPOSITION AND PRECIPITATION OF CARBIDES IN HOT-ROLLED Si-Fe SHEETS

在高温金相显微镜下,直接观察碳化物在热轧硅钢中的分解与析出过程。指出冷却速度对碳化物析出形态有很大影响。用差热分析确定了碳化物的分解与析出温度。所得结果为改进热轧硅钢生产工艺提供了重要的依据。