OmniCon: a Mobile IP‐based vertical handoff system for wireless LAN and GPRS links

Wi‐Fi based hotspots offer mobile users broadband wireless Internet connectivity in public work spaces and corporate/university campuses. Despite the aggressive deployment of these hotspots in recent years, high‐speed wireless Internet access remains restricted to small geographical areas due to the limited physical coverage of wireless LANs. On the other hand, despite their lower throughput, cellular networks have a significantly wider coverage and are thus much more available. Recognizing that 2.5G or 3G cellular networks can effectively complement wireless LANs, we set out to develop a vertical handoff system that allows mobile users to seamlessly fall back to such cellular networks as the general packet radio service (GPRS) or 3G whenever wireless LAN connectivity is not available. The resulting handoff mechanism allows a network connection of a mobile node to operate over multiple wireless access networks in a way that is transparent to end user applications. In this paper, we present the design, implementation, and evaluation of a fully operational vertical handoff system, called OmniCon, which enables mobile nodes to automatically switch between wireless LAN and GPRS, based on wireless LAN availability, by introducing a simple extension to the existing Mobile IP implementation. We discuss the design issues in the proposed vertical handoff system for heterogeneous networks, including connection setup problems due to network address translation, and the disparity in link characteristics between wireless LANs and GPRS. A detailed performance evaluation study of the OmniCon prototype demonstrates its ability to migrate active network connections between these two wireless technologies with low handoff latency and close to zero packet loss. Copyright © 2006 John Wiley & Sons, Ltd.     

Formation and Accumulation of Intragranular Pores in the Hydrothermally Synthesized Barium Titanate Nanoparticles

As highly integrated circuits are demanded for high‐performance electric devices, small sizes of barium titanate (BaTiO₃) as a dielectric material are desirable for the application of multilayer ceramic capacitors. Since the small sizes of the particles degrade the dielectric property, especially below a certain critical size, understanding the probable cause is significant for the high‐performance capacitors. Here, we have demonstrated nanosized BaTiO₃ with average size below 30 nm and a uniform size distribution. High‐resolution transmission electron microscopy (TEM) shows that the as‐synthesized BaTiO₃ contains intragranular pores. We have analyzed the correlation between the intragranular pores inside nanoparticles and their phase ratio of cubic and tetragonal. We have found that the presence of the intragranular pores affects low tetragonality of BaTiO₃ particles, and the intragranular pores are generated by the accumulation of hydroxyl groups during hydrothermal reaction. Formation and accumulation of intragranular pores have been investigated by ex‐situ synchrotron X‐ray diffraction and TEM analysis, suggesting the phase evolution model of nanosized BaTiO₃.     

Metalloendopeptidase ADAM-like Decysin 1 (ADAMDEC1) in Colonic Subepithelial PDGFRα+ Cells Is a New Marker for Inflammatory Bowel Disease

Metalloendopeptidase ADAM-Like Decysin 1 (ADAMDEC1) is an anti-inflammatory peptidase that is almost exclusively expressed in the gastrointestinal (GI) tract. We have recently found abundant and selective expression of Adamdec1 in colonic mucosal PDGFRα⁺ cells. However, the cellular origin for this gene expression is controversial as it is also known to be expressed in intestinal macrophages. We found that Adamdec1 mRNAs were selectively expressed in colonic mucosal subepithelial PDGFRα⁺ cells. ADAMDEC1 protein was mainly released from PDGFRα⁺ cells and accumulated in the mucosal layer lamina propria space near the epithelial basement membrane. PDGFRα⁺ cells significantly overexpressed Adamdec1 mRNAs and protein in DSS-induced colitis mice. Adamdec1 was predominantly expressed in CD45⁻ PDGFRα⁺ cells in DSS-induced colitis mice, with only minimal expression in CD45⁺ CD64⁺ macrophages. Additionally, overexpression of both ADAMDEC1 mRNA and protein was consistently observed in PDGFRα⁺ cells, but not in CD64⁺ macrophages found in human colonic mucosal tissue affected by Crohn’s disease. In summary, PDGFRα⁺ cells selectively express ADAMDEC1, which is localized to the colon mucosa layer. ADAMDEC1 expression significantly increases in DSS-induced colitis affected mice and Crohn’s disease affected human tissue, suggesting that this gene can serve as a diagnostic and/or therapeutic target for intestinal inflammation and Crohn’s disease.     

Viscoelastic Behavior, Thermodynamic Compatibility, and Phase Equilibria in Block Copolymer-Based Pressure-Sensitive Adhesives

The viscoelastic behavior, thermodynamic compatibility, and phase equilibria in block copolymer-based pressure-sensitive adhesives were investigated. The block copolymers investigated were: (1) polystyrene-block-polybutadiene-block-polystyrene (SBS) copolymer (KRATON® D-1102, Shell Development Company) and (2) polystyrene-block-polyisoprene-block-polystyrene (SIS) copolymer (KRATON® D-1107, Shell Development Company). The tackifying resins investigated were: (1) WINGTACK® 86 (Goodyear Tire & Rubber Company) and (2) PICCOTAC® 95BHT (Hercules Inc.). Samples of various compositions were prepared by a solution-casting method with toluene as solvent. Measurements of dynamic storage modulus (G'), dynamic loss modulus (G'), and loss tangent (tan δ) were taken, using a Rheometrics Mechanical Spectrometer. It was found that: (1) both WINGTACK 86 and PICCOTAC 95BHT were equally effective in decreasing the plateau modulus (G^O_N), and increasing the glass transition temperature (T_g) of the polyisoprene midblock of KRATON 1107; and (2) WINGTACK 86 was very effective in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102, whereas PICCOTAC 95BHT was not. The observed difference between WINGTACK 86 and PICCOTAC 95BHT in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102, whereas PICCOTAC 95BHT was not. The observed difference between WINGTACK 86 and PICCOTAC 95BHT in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102 (perhaps to SBS block copolymers in general) is explained by the values of the interaction parameter for WINGTACK 86 and KRATON 1102, and for PICCOTAC 95BHT and KRATON 1102. The interaction parameter was determined, using the piezoelectric quartz sorption method. Phase diagrams were constructed for the four block copolymer/tackifying resin systems investigated, using information obtained from both dynamic viscoelastic measurements and optical microscopy. It was found that when mixed with KRATON 1102, PICCOTAC 95BHT formed separate domains whereas WINGTACK 86 did not over the range of concentrations and temperatures investigated. This confirms the evidence obtained from two other independent experimental techniques, namely, dynamic viscoelastic measurements and the piezo-electric sorption method. We have concluded from the present study that PICCOTAC 95BHT is not as an effective tackifying resin as WINGTACK 86, when each is mixed with KRATON 1102. It is pointed out further that information on the order-disorder transition temperature T_r, which was determined from a rheological technique proposed by us, is valuable in determining optimal processing conditions for block copolymer-based pressure-sensitive adhesives.     

Low-bandgap copolymers consisting of 2,1,3-benzoselenadiazole and carbazole derivatives with thiophene or selenophene π-bridges

Two donor–acceptor-type alternating copolymers consisting of 2,1,3-benzoselenadiazole and carbazole derivatives with thiophene or selenophene π-bridges were synthesized by Suzuki cross-coupling polymerization, and their optical, electrochemical, and photovoltaic properties were compared. The selenophene π-bridged copolymer (PCz-DSeBSe) exhibited a smaller band-gap (1.82 eV) than the thiophene-bridged polymer (PCz-DTBSe; 1.89 eV). PCz-DSeBSe also showed a deeper highest occupied molecular orbital energy level (−5.36 eV) than PCz-DTBSe (−5.20 eV). Moreover, the PCz-DSeBSe thin film showed higher crystallinity and hole mobility than the PCz-DTBSe thin film. Organic photovoltaic devices were fabricated using the polymers as the donors and [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) as the acceptor. The device using PCz-DSeBSe showed a higher open circuit voltage (V_oc), short circuit current density (J_sc), and power conversion efficiency (PCE) than that using PCz-DTBSe. The fabricated indium tin oxide/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/PCz-DSeBSe:PC₇₁BM/LiF/Al device showed the maximum PCE of 2.88% with a J_sc of 7.87 mA/cm², an V_oc of 0.80 V, and a fill factor of 0.50 under AM 1.5G irradiation (100 mW/cm²).     

Generating interpretable fuzzy rules for adaptive job dispatching

Adaptive scheduling is an approach that selects and applies the most suitable strategy considering the current state of the system. The performance of an adaptive scheduling system relies on the effectiveness of the mapping knowledge between system states and the best rules in the states. This study proposes a new fuzzy adaptive scheduling method and an automated knowledge acquisition method to acquire and continuously update the required knowledge. In this method, the criteria for scheduling priority are selected to correspond to the performance measures of interest. The decisions are made by rules that reflect those criteria with appropriate weights that are determined according to the system states. A situated rule base for this mapping is built by an automated knowledge acquisition method based on system simulation. Distributed fuzzy sets are used for evaluating the criteria and recognizing the system states. The combined method is distinctive in its similarity to the way human schedulers accumulate and adjust their expertise: qualitatively establishing meaningful criteria and quantitatively optimizing the use of them. As a result, the developed rules may readily be interpreted, adopted and, when necessary, modified by human experts. An application of the proposed method to a job-dispatching problem in a hypothetical flexible manufacturing system (FMS) shows that the method can develop effective and robust rules.     

Mechanical property enhancement of non‐bonding electrospun mats via adhesive

In the present study, the effect of adhesive on the morphology of different electrospun polymeric mats was investigated. The modification of two polymers, poly(methyl methacrylate) and poly(vinyl chloride), was carried out by blending the polymers with different amounts of poly(butyl acrylate) (PBA) adhesive to investigate the effect of different amounts of adhesive with heat hardener in hybrid mats. The introduction of various concentrations of PBA into different polymer solutions led to the formation of point‐bonded electrospun fibrous mats. Scanning electron microscopy images indicated that point‐bonded polymer/adhesive fibers were uniformly distributed throughout the mats. Fourier transform infrared spectrometry, contact angle measurements and thermogravimetric analysis were used to study the different properties of the hybrid mats. The tensile strength of the blended fibrous electrospun mats was increased effectively. This enhancement of the mechanical properties of the mats due to the presence of adhesive increases the number of potential applications of the electrospun mats, especially for mechanically weak polymers. Copyright © 2012 Society of Chemical Industry     

Effect of boron addition on the microstructure and mechanical properties of 6.5% V-5% W high speed steel

The effect of adding 0.04% additional boron to 6.5% V-5% W high speed steel was investigated. The microstructure characterization, phase identification, and carbide identification of the materials were performed using SEM/EDS and XRD. The cell size and carbide volume fraction were examined using image analysis software. The boron distribution was observed by PTA Boron Tracking. The addition of 0.04% more boron to a HSS alloy exerted a cell refining effect on the sample. The cell refinement of dendritic structures in the alloy containing boron may be attributed to the constitutional supercooling effect associated with the fairly small distribution coefficient for boron in iron. The addition of boron increases the bending strength of the material by more than 10%, as well as increasing its hardness.     

An adaptive ARQ–HARQ interworking scheme in WiMAX systems

For reliable data transmissions, WiMAX systems support automatic repeat query (ARQ) that operates at the upper MAC and hybrid automatic repeat query (HARQ) that operates at the lower MAC and PHY. ARQ and HARQ schemes have their own weakness that results in low throughput and high delay in WiMAX systems. Although ARQ and HARQ schemes can complement with each other, they operate independently. Some studies focus on the benefits of the interaction between ARQ and HARQ schemes, but these studies have limitations. In this paper, we propose an adaptive ARQ and HARQ interworking scheme to provide reliable transmissions without performance degradation in WiMAX systems. The proposed scheme has five features that are designed to solve the weaknesses of the ARQ and HARQ schemes. We compare the proposed scheme with existing schemes that utilize the ARQ and HARQ interaction through simulations, and the simulation results show that the proposed scheme shows improved performance over existing schemes.