Numerical investigations in Rayleigh breakup of round liquid jets with VOF methods

Simulations of the growth of a capillary instability and of the breakup of a jet were carried out using a one-fluid model to describe the two-phase flow motion and a VOF approach to capture the interface. The model considered each phase as fictitious sub-domains and accounted implicitly for jump conditions at the interface through a unique set of equations for which a source term of surface tensions appeared in momentum equations. The predominance of capillary effects in the breakup mechanism required to accurately describe the surface tension contribution. The Brackbill surface model was chosen because of its simplicity to represent tension forces, although it was known to generate parasitic currents susceptible to limit its precision. The flow incompressibility was ensured with an augmented Lagrangian method in case of sequential calculations and by a predictor/corrector approach for 3D simulations that required parallel computations. As a first step, the numerical methods were validated by simulating the growth of a capillary instability and comparing results to those predicted by the Rayleigh theory for capillary instabilities. The consistency of the Brackbill surface tension model and the accuracy of the methods were evaluated via a convergence study. As a second step, the simulation of a jet breakup was carried out using water as injected liquid and compressed carbon dioxide as surrounding medium. It was shown that the simulation predicted accurately the breakup length and the droplet size evidenced experimentally in literature.     

Kinetic multi-layer model of film formation,growth, and chemistry (KM-FILM): Boundary layer processes,multi-layer adsorption,bulk diffusion,and heterogeneous reactions

Large surface area-to-volume ratios indoors cause heterogeneous interactions to be especially important. Semi-volatile organic compounds can deposit on impermeable indoor surfaces forming thin organic films. We developed a new model to simulate the initial film formation by treating gas-phase diffusion and turbulence through a surface boundary layer and multi-layer reversible adsorption on rough surfaces, as well as subsequent film growth by resolving bulk diffusion and chemical reactions in a film. The model was applied with consistent parameters to reproduce twenty-one sets of film formation measurements due to multi-layer adsorption of multiple phthalates onto different indoor-relevant surfaces, showing that the films should initially be patchy with the formation of pyramid-like structures on the surface. Sensitivity tests showed that highly turbulent conditions can lead to the film growing by more than a factor of two compared to low turbulence conditions. If surface films adopt an ultra-viscous state with bulk diffusion coefficients of less than 10⁻¹⁸ cm² s⁻¹, a significant decrease in film growth is expected. The presence of chemical reactions in the film has the potential to increase the rate of film growth by nearly a factor of two.     

Social justifications for moral emotions: When reasons for disgust are less elaborated than for anger.

In the present research, we tested the unreasoning disgust hypothesis: moral disgust, in particular in response to a violation of a bodily norm, is less likely than moral anger to be justified with cognitively elaborated reasons. In Experiment 1, participants were asked to explain why they felt anger and disgust toward pedophiles. Participants were more likely to invoke elaborated reasons, versus merely evaluative responses, when explaining their anger, versus disgust. Experiment 2 used a between-participants design; participants explained why they felt either anger or disgust toward seven groups that either violated a sexual or nonsexual norm. Again, elaborated reasons were less prevalent when explaining their disgust versus anger and, in particular, when explaining disgust toward a group that violated a sexual norm. Experiment 3 further established that these findings are due to a lower accessibility of elaborated reasons for bodily disgust, rather than inhibition in using them when provided. From these findings, it can be concluded that communicating external reasons for moral disgust at bodily violations is made more difficult due to the unavailability of those reasons to people. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Morphological and structural properties of neutron-irradiated B12C3 boron carbide microcrystals

Boron carbide B₁₂C₃ microcrystals were neutron irradiated at four different fluences, namely at 1.09, 2.19, 3.28 and 4.38 × 10¹⁶ n cm^?2. The structural properties were studied by means of Raman spectroscopy, revealing that the neutron induced structural defects are focused toward the interstitial chains of B₁₂C₃. The morphology of the B₁₂C₃ samples was studied by means of secondary electron imaging showing that the neutron irradiation did not modify the size distribution of the microcrystals.     

Influence of the 316 L stainless steel interface on the stability and barrier properties of plasma fluorocarbon films

Coatings are known to be one of the more suited strategies to tailor the interface between medical devices and the surrounding cells and tissues once implanted. The development of coatings and the optimization of their adhesion and stability are of major importance. In this work, the influence of plasma etching of the substrate on a plasma fluorocarbon ultrathin coating has been investigated with the aim of improving the stability and the corrosion properties of coated medical devices. The 316 L stainless steel interface was subjected to two different etching sequences prior to the plasma deposition. These plasma etchings, with H(2) and C(2)F(6) as gas precursors, modified the chemical composition and the thickness of the oxide layer and influenced the subsequent polymerization. The coating properties were evaluated using flat substrates submitted to deformation, aging into aqueous medium and corrosion tests. X-ray photoelectron spectroscopy (XPS), time of flight-secondary ion mass spectrometry (ToF-SIMS), ellipsometry, and atomic force microscopy (AFM) were performed to determine the effects of the deformation and the aging on the chemistry and morphology of the coated samples. Analyses showed that plasma etchings were essential to promote reproducible polymerization and film growth. However, the oxide layer thinning due to the etching lowered the corrosion resistance of the substrate and affected the stability of the interface. Still, the deformed samples did not exhibited adhesion and cohesion failure before and after the aging.     

Clinical outcomes and molecular genotyping of Staphylococcus aureus isolated from milk samples of dairy primiparous Mediterranean buffaloes (Bubalus bubalis)

Staphylococcus aureus is one of the most important pathogens causing mastitis in dairy cows and in Mediterranean buffaloes. Genotype B (GTB) is contagious in dairy cows and may occur in up to 87% of cows of a dairy herd. It was the aim of this study to evaluate genotypes present, clinical outcomes, and prevalence of Staph. aureus in milk samples of primiparous Mediterranean dairy buffaloes. Two hundred composite milk samples originating from 40 primiparous buffaloes were collected from May to June 2012, at d 10, 30, 60, 90, and 150 d in milk (DIM) to perform somatic cell counts and bacteriological cultures. Daily milk yields were recorded. Before parturition until 40 to 50 DIM, all primiparous animals were housed separated from the pluriparous animals. Milking was performed in the same milking parlor, but the primiparous animals were milked first. After 50 DIM, the primiparous were mixed with the pluriparous animals, including the milking procedure. Individual quarter samples were collected from each animal, and aliquots of 1 mL were mixed and used for molecular identification and genotyping of Staph. aureus. The identification of Staph. aureus was performed verifying the presence of nuc gene by nuc gene PCR. All the nuc-positive isolates were subjected to genotype analysis by means of PCR amplification of the 16S-23S rRNA intergenic spacer region and analyzed by a miniaturized electrophoresis system. Of all 200 composite samples, 41 (20.5%) were positive for Staph. aureus, and no genotype other than GTB was identified. The prevalence of samples positive for Staph. aureus was 0% at 10 DIM and increased to a maximum of 22/40 (55%) at 90 DIM. During the period of interest, 14 buffaloes tested positive for Staph. aureus once, 6 were positive twice, and 5 were positive 3 times, whereas 15 animals were negative at every sampling. At 90 and 150 DIM, 7 (17.5%) and 3 buffaloes (7.5%), respectively, showed clinical mastitis (CM), and only 1 (2.5%) showed CM at both samplings. At 60, 90, and 150 DIM, 1 buffalo was found with subclinical mastitis at each sampling. At 30, 60, 90, and 150 DIM, 2.5 (1/40), 22.5 (9/40), 35 (14/40), and 10% (4/40) were considered affected by intramammary infection, respectively. Buffaloes with CM caused by Staph. aureus had statistically significantly higher mean somatic cell count values (6.06 ± 0.29, Log₁₀ cells/mL ± standard deviation) and statistically significantly lower mean daily milk yields (7.15 ± 1.49, liters/animal per day) than healthy animals (4.69 ± 0.23 and 13.87 ± 2.64, respectively), buffaloes with IMI (4.82 ± 0.23 and 11.16 ± 1.80, respectively), or with subclinical mastitis (5.47 ± 0.10 and 10.33 ± 0.68, respectively). Based on our knowledge, this is the first time that Staph. aureus GTB has been identified in milk samples of dairy Mediterranean buffaloes.