Design and test of an electronic nose for monitoring the air quality in the international space station

Long-term manned space missions requires a continuous monitoring of the air quality inside the spacecraft. For this scope, among several different solutions, electronic noses have been considered. On behalf of European Space Agency an electronic nose specifically designed for air quality control in closed environment is under development. After several ground experiments concerning the monitoring of a biofilter efficiency, the instrument has been tested during the ENEIDE mission on board of the International Space Station. in this paper the instrument main concepts and its performance in ground and space experiments are illustrated.     

A mass spectrometric survey of some biologically important lipids

The mass spectra of lipids are reviewed with emphasis on characteristic fragmentation patterns of each general class of compounds. Recent developments in the area of field ionization and field desorption mass spectrometry are discussed relative to each class of lipids.     

Monitoring of biological odour filtration in closed environments with olfactometry and an electronic nose.

Air treatment with a compact biological membrane filter, and air quality monitoring with an electronic nose were tested in the laboratory on air from a cage containing six mice. Additional analyses of air to and from the filter were performed using olfactometry and ammonia and hydrogen sulphide gas detection tubes. The biological air filter is a module containing biofilm-coated membrane fibres that separate a closed liquid loop from a gas phase. Odour compounds and oxygen diffuse through the membranes from the gas phase to the biofilm, where they are degraded to carbon dioxide and water. The prototype "ENQBE" electronic nose is based on an array of eight thickness shear mode resonators (TSMR), also known in the literature as quartz microbalance sensors. The chemical sensitivity is given by molecular films of metalloporphyrins and similar compounds. Chemical interaction of compounds in the air with the vibrating sensors induces a frequency change of the vibration that can be measured as a signal. The air from the mouse cage had a strong odour (3490 OUE/m3). The biological membrane filter performed well, achieving over 80% odour and ammonia reduction. The electronic nose signal could be correlated with the inlet and outlet air-quality of the biological filter, making it a promising method for monitoring air quality in closed environments.     

Molding Micropatterns of Elasticity on PEG‐Based Hydrogels to Control Cell Adhesion and Migration

We present an innovative and simple, soft UV lithographic method “FIll‐Molding In Capillaries” (FIMIC) that combines soft lithography with capillary force driven filling of micro‐channels to create smooth hydrogel substrates with a 2D micro‐pattern on the surface. The lithographic procedure involves the molding of a polymer; in our case a bulk PEG‐based hydrogel, via UV‐curing from a microfabricated silicon master. The grooves of the created regular line pattern are consequently filled with a second hydrogel by capillary action. As a result, a smooth surface is obtained with a well‐defined pattern design of the two different polymers on its surface. The FIMIC method is very versatile; the only prerequisite is that the second material is liquid before curing in order to enable the filling process. In this specific case we present the proof of principle of this method by applying two hydrogels which differ in their crosslinking density and therefore in their elasticity. Preliminary cell culture studies on the fabricated elasticity patterned hydrogels indicate the preferred adhesion of the cells to the stiffer regions of the substrates, which implies that the novel substrates are a very useful platform for systematic cell migration studies, e.g. more fundamental investigation of the concept of “durotaxis”.     

Development of a Liquid Rocket Ground Demonstrator Through Thermal Analyses

Abstract

CIRA, the Italian Aerospace Research Center, manages the HYPROB (HYdrocarbon PROpulsion test Bench) Program, supported by the Italian Ministry of University and Research, with the aim of improving the national capabilities to develop rocket engines for future applications. A system line, named HYPROB-BREAD, focusing on liquid oxygen/liquid Methane (LOX/LCH₄) technology and relative breadboards, is included. A step-by-step approach has been adopted to validate critical design aspects by simplified technological breadboards. The reliable operation of an engine is ensured by thermally efficient cooling jackets, which require the in-depth comprehension of the coolant behavior. For this purpose, a specific breadboard has been designed and tested. Another important issue is the evaluation of the thermal loads, transferred by the combustion hot gases to the thrust chamber walls. In this view, a Subscale Calorimetric Breadboard has been designed; 13 disks surround the chamber: they are fed up by water and provide the cooling and the measurement of the exchanged thermal power. The final article is a 3-ton-class LOX/LCH₄ regenerative demonstrator, whose coolant is liquid methane, flowing in a cooling system, made by several axial channels. This paper aims at describing the thermal investigations, conducted in the design and the verification phase for the aforementioned breadboards and demonstrator cooling jacket.     

Testing Methods for PUF-Based Secure Key Storage Circuits

Design for test is an integral part of any VLSI chip. However, for secure systems extra precautions have to be taken to prevent that the test circuitry could reveal secret information. This paper addresses secure test for Physical Unclonable Function based systems. It investigates two secure Built-In Self-Test (BIST) solutions for Fuzzy Extractor (FE) which is the main component of PUF-based systems. The schemes target high stuck-at-fault (SAF) coverage by performing scan-chain free functional testing, to prevent scan-chain abuse for attacks. The first scheme reuses existing FE blocks (for pattern generation and compression) to minimize the area overhead, while the second scheme tests all the FE blocks simultaneously to minimize the test time. The schemes are integrated in FE design and simulated; the results show that for the first test scheme, a SAF fault coverage of 95 % can be realized with no more than 47.1k clock cycles at the cost of a negligible area overhead of only 2.2 %; while for the second test scheme a SAF fault coverage of 95 % can be realized with 3.5k clock cycles at the cost of 18.6 % area overhead. Higher fault coverages are possible to realize at extra cost (i.e., either by extending the test time, or by adding extra hardware, or a combination of both).     

Effect of antioxidant‐enriched foods on plasma: Phospholipid molecular species composition

The dietary supplementation with antioxidant‐enriched foods was evaluated for the phospholipid (PL) class and molecular species composition of human plasma. Twenty healthy subjects were supplied with α‐tocopherol (13.7 mg/day) and coenzyme Q₁₀ (19.4 mg/day) by enriched milk, a dessert, fruit juice and yogurt for 21 days. Phosphatidylcholine (85.2%) and sphingomyelin (10.9%) were the main PL in all samples. Differences among the contents of PL classes were not found. However, principal component analysis showed differences in the PL molecular species 2 h after the mid‐morning snack. An increase of phosphatidylinositol (PI) containing stearic/arachidonic (on average from 42.5 to 47.0%), stearic/docosahexaenoic (3.2 vs. 4.9%), oleic/arachidonic and palmitic/docosapentaenoic acid (2.4 vs. 3.7%) was observed. The decreasing species of PI were palmitic/linoleic (5.7 vs. 4.3%), palmitic/oleic (8.1 vs. 6.9%) and stearic/linoleic acid (17.4 vs. 13.8%) after the mid‐morning snack. Phosphatidylethanolamine (PE) species showed an opposite trend with respect to PI: A decrease was registered for stearic/arachidonic (17.0 vs. 15.8%), stearic/docosahexaenoic (7.2 vs. 4.9%), oleic/arachidonic and palmitic/docosapentaenoic acid (5.8 vs. 4.8%); an increase was observed for the PE species containing oleic/linoleic (5.5 vs. 7.5% on average after the mid‐morning snack), stearic/linoleic (19.7 vs. 23.4%) and stearic/oleic acid (11.4 vs. 13.9%).     

Response to beta blockers in patients with neurocardiogenic syncope: how to predict beneficial effects

No definitive data are available about the possibility of predicting improvement in patients with neurocardiogenic syncope treated with beta blockers. Among 112 patients with syncope and a positive head-up tilt test (HUT), independent predictors for prevention of symptoms with beta blockers were determined using the Cox proportional hazards model. Each patient underwent HUT at 70 degrees for 20 minutes both in the drug-free state and during isoproterenol infusion given to increase the heart rate by at least 25%. Fifty-nine patients had a positive HUT during isoproterenol infusion and 53 in the drug-free state. All patients were then given esmolol infusion at 500 micrograms/kg per minute for 3 minutes followed by 300 micrograms/kg per minute maintenance dose. HUT was then repeated as previously described with or without isoproterenol, depending upon the initial positive response. Regardless of the response during esmolol, all patients were treated with metoprolol 50 to 100 mg twice daily. At follow-up, 36 patients experienced symptom relapse. Four of them had negative HUT on esmolol, whereas the remaining 32 did not respond to the acute infusion of esmolol. Only four patients with positive HUT on esmolol had a favorable response to metoprolol. Patients responding to metoprolol were older (55 +/- 12 years vs 42 +/- 15 years, P < 0.05). Response to metoprolol was predicted by a negative test on esmolol (P < 0.0001) and a positive HUT on isoproterenol (P < 0.001). Age older than 42 years was also associated with a higher likelihood of metoprolol success (P < 0.02). CONCLUSION: Acute challenge with esmolol infusion appears to be an accurate predictor of response to chronic beta blockers, together with age and a positive HUT during low-dose isoproterenol infusion.