B/S模式下的社区再就业管理信息系统探讨与实践

随着Internet的广泛应用,浏览器/服务器(B/S)结构的管理信息系统以其界面友好、操作简单、维护方便等特点,越来越受到用户的青睐。本文对B/S模式下的社区再就业管理信息的开发的设计思路、系统组成、系统功能以及系统软硬件平台选择进行了详细探讨,并结合大庆市再就业工作的实际情况,进行了系统开发的实例介绍。     

冷型在离心铸造中产生振动的原因探讨

卧式离心机托轮旋转时,通过摩擦力把运动传递给了冷型,在托轮的带动下,冷型按一定的角速度旋转.本文探讨了冷型在离心铸造过程中产生振动的原因,提出了减小和防止冷型在离心过程中振动的方法.     

采空区自然发火原因简析

文章分析了张双楼煤矿白石崖项目部煤层自然发火的原因,并简述了现场采取的防治措施,对类似矿井具有借鉴作用。     

多传感器融合下多工况刀具磨损状态预测的深度森林方法研究

准确监测加工过程刀具磨损状态有助于避免因刀具失效导致的产品质量问题。 建立不同工况的刀具磨损监测模型,往 往需要对每组工况调参以保证精度。 为减少调参并保证预测精度,结合深度森林的超参数少、参数对模型不敏感和训练过程自 适应等优点,利用深度森林建立了多传感器信号及多工况下自主特征选择的刀具磨损状态预测模型。 基于 3 组不同工艺参数 下 TC18 铣削过程的多传感器及磨损数据,以及预测与健康管理(PHM)学会 2010 年高速数控机床刀具健康预测竞赛的开放数 据,深度森林在 3 组工况的预测精度分别为 95. 35% 、96. 63% 和 97. 06% ,在 PHM 数据上为 98. 95% ,验证了深度森林对多工况 下刀具磨损预测的高精度和适用性,为在线监测技术提供了有力的指导。     

超薄玻璃温度控制试验研究与实践

为了减小熔窑玻璃液温度变化对玻璃质量的影响,根据多年对超薄玻璃生产线熔窑温度控制方法的试验、实践,对超薄玻璃熔窑温度控制进行探究,归纳稳定控制熔窑温度的四种方法,讨论通过四种方法稳定熔窑内玻璃液温度、降低和稳定玻璃气泡的工艺技术措施,分析四种方法的优点与不足,推荐优先采用第四种方法,该方法经实践验证较适合超薄玻璃窑温控制,也适合其他浮法玻璃窑温控制。     

Homogeneously distributed magnetite in the polystyrene spherical particles using the miniemulsion polymerization

The polystyrene spherical particles with homogeneously distributed magnetites were prepared using the conventional miniemulsion polymerization. In the first, the magnetite nanoparticles were coated with oleic acid in aqueous Fe³⁺/Fe²⁺ solution using excess ammonium hydroxide via co-precipitation method. In the second, the miniemulsion polymerization of styrene was carried out using various concentrations of potassium persulfate (KPS) as an initiator, H-08E as an emulsifier, hexadecane as a co-emulsifier and acrylic acid as a dispersing agent in the presence of oleic acid coated magnetite at 70 °C for 24 h. The particle size and its distribution of the homogeneously embedded magnetites were influenced by the concentration of the initiator (KPS) and acrylic acid (AAc). In addition, the emulsifier, H-08E, affects the size and the shape of the PS particles. The optimum conditions for the homogeneously distributed magnetite in the spherical PS particles with the narrow distribution were 5 wt.% styrene, 0.2 g KPS, 0.2 g AAc, and 0.12 g H-08E by inducing 364 nm in diameter, 12.04% in the coefficient of variation (C_v) and 22.1% of the maximum magnetite content.     

热处理对大豆蛋白水解物的影响

研究了在pH渐变条件下Alcalase与黑曲霉酸性蛋白酶复合水解大豆蛋白反应中热处理对大豆蛋白水解物的影响。结果表明,大豆蛋白经90℃、10min热处理,其水解度由未经热处理的26％提高到30.2％,所得水解物中分子量小于1350的寡肽占71.2％。     

Hydrothermal Synthesis of Oriented Anatase Films Consisting of Columnar Aggregates and Their Wetting Properties

We hydrothermally synthesized anatase films on Ti substrates from transparent aqueous solutions of layered titanate colloids. The morphology and wetting properties of the films were examined. The films consisted of columnar aggregates grown on the Ti substrates, which resulted in high orientation. Randomly oriented films were obtained when alumina was used as a substrate, whereas the sol–gel precoating of a titanium oxide (TiO₂) layer on alumina substrates resulted in similar orientation as that of the films on Ti substrates. Thus, the presence of TiO₂ on the substrate surface plays an important role in the orientation of columnar aggregates. The columnar aggregates were similar in microstructure to the arms of a type of six-pointed star-like anatase aggregate synthesized hydrothermally from the same reaction solutions. They were composed of twins of tapered anatase nanocrystals, which provided a rough film surface. The film surface was highly hydrophilic and oleophilic due to the nanoscale roughness even when the film was not irradiated with UV light.     

BT模式下轨道交通工程临电报装实践

在分析北京市轨道交通亦庄线工程施工用电特点的基础上,进行了施工用电方案优化,以"节省"、"快速"为突破口,高效地实施了工程施工用电工程,为工程施工提供了基础性保障。     

潜水钻机成孔垂直度控制技术

潜水钻机成孔工艺广泛应用于沿海地区第四系覆盖层的钻孔灌注桩施工中。介绍了潜水钻机的工作机理。在工程实践中,通过对钻机设备结构改良,对钻机成孔工艺方法改进等措施,使潜水钻机成孔垂直度控制技术得到了提高,在一些较深基坑钻孔灌注桩工程中得到了成功应用。