Effect of ball milling on the thermal conductivity and viscosity of Indian coal fly ash nanofluid

The present study investigates the effect of ball milling on thermal conductivity and viscosity of stable nanofluid of fly ash from Indian coal. The particle size of fly ash decreased from micron size to 89, 55.5, and 11.5 nm with reduction by 55, 90, and 434 times, respectively, due to ball milling for 30, 40, and 60 hours. The surfactant Triton X-100 was used to attain stability of 0.1% and 0.5% volume concentration of fly ash nanofluid. The samples were characterized by using scanning electron microscopy, dynamic light scattering, and zeta potential analysis. The outcome reveals that the thermal conductivity of fly ash nanofluid increases with temperature, volume concentration, and reduction in particle size. A maximum enhancement in thermal conductivity of 11.9% with 11.5-nm nanofluid sample and 5.4% with 89-nm nanofluid sample for 0.5% concentration at 60°C is observed. The viscosity of fly ash nanofluid increases with concentration and varies inversely with particle size and temperature. A difference of 1.6% in viscosity is observed between the values obtained with 11.5 and 89 nm nanofluid samples for 0.5% concentration at 30°C.     

Poly(N-vinylpyrrolidone)-stabilized colloidal graphene-reinforced poly(ethylene-co-methyl acrylate) to mitigate electromagnetic radiation pollution

Polymer Bulletin - Electrically conducting flexible polymeric nanocomposite has been fabricated through wet mixing method where conducting inclusion was acoustically exfoliated pristine graphene...     

Effect of Halloysite Nanotubes as Novel Nanofiller on Peroxide- and Electron Beam Radiation-Initiated Polyphosphazene Elastomer

A tubelike, naturally occurring halloysite clay mineral (HNTs) incorporated polyphosphazene (PPZ) elastomeric nanocomposites had been electron beam radiated and thermally treated for certain applications. To improve the dispersion of raw HNTs (H), an organosilane modifier had been exploited. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) technique were utilized for plausible interaction and intercalation. The efficiency of electron beam radiation over chemical initiation for intra and inter chain network formation within the resin was substantiated through oil and solvent resistance studies. Effective delay in mass transport as compared to the virgin elastomer was observed through thermal analysis.     

Conformation Analysis of GalNAc‐Appended Sugar Amino Acid Foldamers as Glycopeptide Mimics

Sugar amino acid (SAA)‐based foldamers with well‐defined secondary structures were appended with N‐acetylgalactosamine (GalNAc) sugars to access sequence‐defined, multidentate glycoconjugates with full control over number, spacing and position. Conformation analysis of these glycopeptides by extensive NMR spectroscopic studies revealed that the appended GalNAc units had a profound influence on the native conformational behaviour of the SAA foldamers. Whereas the 2,5‐cis glycoconjugate showed a helical structure in water, comprising of two consecutive 16‐membered hydrogen bonds, its 2,5‐trans congener displayed an unprecedented 16/10‐mixed turn structure not seen before in any glycopeptide foldamer.     

Development of Minimal Diguanosinyl Motif toward RNA G-Quadruplex-Like Structures in Solution

Among the non-canonical structures of B-DNA, the G-quadruplex is of particular interest because of its well-defined conformation, high stability, and versatility. Herein we report our studies on the development of an amide-linked minimal diguanosinyl motif that forms a G-quadruplex-like structure in solution in the presence of potassium cations; various linear guanosine amino acid dimers were synthesized with linkers of different chain lengths to investigate the optimum flexibility required to form such structures.     

Lab scale optimization of various factors for photocatalytic hydrogen generation over low cost Cu0.02Ti0.98O2-δ photocatalyst under UV/Visible irradiation and sunlight

We have demonstrated earlier that maximum H₂ generated @ 1.167 l/h/m² over Cu_0.02Ti_0.98O_2-δ photocatalyst with apparent quantum efficiency, AQE of 7.5% and solar fuel efficiency, SFE of 3.9% under sunlight. With an aim to scale-up the solar photocatalytic hydrogen process to pilot plant, optimization studies at lab scale as well as in upscaled photoreactors were performed over Cu_0.02Ti_0.98O_2-δ, photocatalyst under UV/visible and sunlight. Cu_0.02Ti_0.98O_2-δ was synthesized by facile sol-gel route and characterized by relevant techniques. Several operational parameters were investigated in order to finalize the conditions which are most favourable for photocatalytic hydrogen yield. Factors such as photocatalyst loadings, v/v concentration of sacrificial reagent, replacement of methanol by industrial waste glycerol, role of different configuration of light source with reactor, effect of stirring during the photocatalytic reaction, effect of fluctuations of solar flux at hourly basis, illumination area on hydrogen yield were studied. Contribution of each factor in determining the hydrogen yield was quantified. Relative standard deviation in hydrogen yield as a function of each factor was estimated. Our findings suggest that in addition to catalyst loadings and sacrificial reagent, improved dispersion of photocatalyst obtained by stirring the reaction mixture in horizontal geometry resulted in enhanced H₂ yield. Hydrogen yield obtained at lab scale can be appropriately extrapolated with respect to illumination area instead of weight of photocatalyst. A relative standard deviation (RSD) of ± 3.82% and ± 4.53% in H₂ yield was calculated for sunny and cloudy days in time zone of 10.30–16.30 h IST. Deviation of H₂ yield was more on cloudy days and beyond 16:30 h. These studies have provided a daily window of 11:00–15:00 h to be utilized throughout the year for a commercial scaled up process, prohibiting the illumination during less productive hours of the day for shaping the improved economics of solar hydrogen generation. Our results obtained at lab scale would be useful to perform sunlight driven scaled –up photocatalytic process using low cost visible light efficient photocatalyst, Cu_0.02Ti_0.98O_2-δ.     

Photo-electrocatalytic methanol oxidation on Pd decorated BiOI nanoparticles in alkali

Journal of Materials Science - Palladium–bismuth oxoiodide nanocomposites of various molar ratios of Pd and BiOI have been synthesized by the facile solvothermal method following the chemical...     

Distribution and nature of organic/mineral bound elements in Assam coals, India

This study focuses on the determination and concentration of twelve elements (Na, K, Ca, Mg, Cr, Mn, Fe, Co, Ni, Cu, Zn and Cd) occurring in sub-bituminous Assam coals and their geochemical association. Distribution of these elements between organic and mineral matters was studied. Comparison of the results of three coals has shown that three elements (Mg, Ca and Mn) are significantly organic bound, while five elements (Fe, Co, Ni, Cu and Zn) are significantly mineral bound; Cd is 50% bound to either organic or mineral matter. FTIR and XRD studies reveal qualitative information about the bonding pattern and nature of components of the mineral matters. The results obtained in this study have considerable geochemical and technological interests.