Static and dynamic compressive properties of polypropylene/zinc oxide nanocomposites

The effect of strain rate is widely recognized as an essential factor that influences the mechanical properties of polymer matrix composites. Despite its importance, no previous work has been reported on the high‐strain rate behavior of polypropylene/zinc oxide nanocomposites. Based on this, static and dynamic compression properties of polypropylene/zinc oxide nanocomposites, with particle contents of 1%, 3%, and 5% by weight, were successfully studied at different strain rates (i.e., 0.01 s^?1, 0.1 s^?1, 650 s^?1, 900 s^?1, and 1100 s^?1) using a universal testing machine and a split Hopkinson pressure bar apparatus. For standardization, approximately 24 nm of zinc oxide nanoparticles were embedded into polypropylene matrix for each of the tested polypropylene/zinc oxide nanocomposites. Results show that the yield strength, the ultimate strength, and the stiffness properties, of polypropylene/zinc oxide nanocomposites, were greatly affected by both particle loading and applied strain rate. Furthermore, the rate sensitivity and the absorbed energy of all tested specimens showed a positive increment with increasing strain rate, whereas the thermal activation volume showed a contrary trend. In addition, the fractographic analysis and particle dispersion of all composite specimens were successfully obtained using a field emisission scanning electron microscopy. POLYM. ENG. SCI., 54:949–960, 2014. © 2013 Society of Plastics Engineers     

Durable pressure filtration membranes based on polyaniline–polyimide P84 blends

A pressure filtration membrane from conducting polymer polyaniline (PANI) is known to possess low mechanical strength and thermal stability. Therefore, it is believed that the properties of the membrane can be enhanced by blending PANI with a conventional polymer like polyimide (PI), which possesses high mechanical strength and thermal stability. A thermal analysis revealed that polymer chain of blend membranes started to break beyond the melting temperature of pure PANI membrane indicating that the addition of PI hindered the degradation of PANI and thus slowed down the decomposition process. Mechanical tests further showed that PANI/PI membrane had a tensile strength that was 60% higher than pure PANI membrane. Furthermore, the surface hydrophilicity and negativity of the blend membrane increased as it was doped in acid, thereby reflecting the exploitation of advantages of both polymers. Rejection at various molecular ranges of PEGs showed that PANI/PI membrane was initially in the ultrafiltration (UF) range, but later fell into the nanofiltration (NF) range when an acid dopant was introduced to the membrane. According to the long‐term filtration performance, the PANI/PI membrane was able to sustain a rejection of up to 99% in Congo red solution with just a slight reduction in flux. POLYM. ENG. SCI., 59:E82–E92, 2019. © 2018 Society of Plastics Engineers     

Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell

The performance of low-to-intermediate temperature (400–800?°C) solid oxide fuel cells (SOFCs) depends on the properties of electrolyte used. SOFC performance can be enhanced by replacing electrolyte materials from conventional oxide ion (O^2-) conductors with proton (H⁺) conductors because H⁺ conductors have higher ionic conductivity and theoretical electrical efficiency than O^2- conductors within the target temperature range. Electrolytes based on cerate and/or zirconate have been proposed as potential H⁺ conductors. Cerate-based electrolytes have the highest H⁺ conductivity, but they are chemically and thermally unstable during redox cycles, whereas zirconate-based electrolytes exhibit the opposite properties. Thus, tailoring the properties of cerate and/or zirconate electrolytes by doping with rare-earth metals has become a main concern for many researchers to further improve the ionic conductivity and stability of electrolytes. This article provides an overview on the properties of four types of cerate and/or zirconate electrolytes including cerate-based, zirconate-based, single-doped cerate–zirconate and hybrid-doped cerate–zirconate. The properties of the proton electrolytes such as ionic conductivity, chemical stability and sinterability are also systematically discussed. This review further provides a summary of the performance of SOFCs operated with cerate and/or zirconate proton conductors and the actual potential of these materials as alternative electrolytes for proton-conducting SOFC application.     

Compressive mechanical properties of sawdust/high density polyethylene composites under various strain rate loadings

This article is concerned with the static and dynamic mechanical properties of high‐density polyethylene (HDPE) reinforced with sawdust (SD) at a strain rate of up to 10³ s^?1. In this study, the static and dynamic properties of HDPE/SD composites with different filler loadings of 5, 10, 15, 20, and 30 wt% SD were deliberated at different levels of strain rates (0.001, 0.01, 0.1, 650, 900, and 1100 s^?1) using a conventional universal testing machine and the split Hopkinson pressure bar apparatus. The results showed that the stress–strain curves, yield behavior, stiffness, and strength properties of the HDPE/SD composites were strongly affected by both the strain rate and the filler loadings. Furthermore, the rate sensitivityof the HDPE/SD composites showed a great dependency on the applied strain rate, increasing as the strain rate increased. However, the thermal activation values showed a contrary trend. Meanwhile, for the postdamage analysis, the results showed that the applied strain rates influenced the deformation behavior of the tested HDPE/SD composites. Moreover, for the fractographic analysis at dynamic loading, the composites showed that all the specimens underwent a severe catastrophic deformation. J. VINYL ADDIT. TECHNOL., 24:162–173, 2018. © 2016 Society of Plastics Engineers     

Sepiolite hybridized commercial fillers,and their effects on curing process,mechanical properties,thermal stability,and flammability of ethylene propylene diene monomer rubber composites

Ethylene propylene diene monomer rubber (EPDM)-based composites containing sepiolite (sep) hybridized with calcium carbonate (CaCO₃), silica (Sil) or carbon black (CB) were prepared on a two-roll mill. The influence of fillers’ contents on the curing, mechanical, thermal and flammability of the composites was investigated. In comparison with EPDM/sep at 30 parts per hundred rubbers (phr) as a control composite, EPDM/sep/CB composites exhibited an outstanding improvement in tensile strength followed by EPDM/sep/Sil and EPDM/sep/CaCO₃ composites. EPDM/sep/CB displayed the highest thermal stability and also improved flammability resistance. In addition, a higher amount of carbon black gave higher tensile strength. The results were influenced by the ability of CB to disperse well and form protective layers acting as mass transport barriers in the matrix. The field emission scanning electron microscopy analyses proved better dispersion of CB in the matrix. The presence of protective layers on the surface of samples consequently improved the thermal properties of the EPDM composites. The mechanism of formation of char protective layer in hybrid EPDM composites was also investigated based on morphological observations of char residues. According to this work, Sil and CB were able to hybrid with sep, while sep could be a potential substitution of CaCO₃ in the EPDM composites.     

Nickel Oxide Based Supported Catalysts for the In-situ Reactions of Methanation and Desulfurization in the Removal of Sour Gases from Simulated Natural Gas

Supported nickel oxide based catalysts were prepared by wetness impregnation method for the in-situ reactions of H₂S desulfurization and CO₂ methanation from ambient temperature up to 300 °C. Fe/Co/Ni (10:30:60)–Al₂O₃ and Pr/Co/Ni (5:35:60)–Al₂O₃ catalysts were revealed as the most potential catalysts, which yielded 2.9% and 6.1% of CH₄ at reaction temperature of 300 °C, respectively. From XPS, Ni₂O₃ and Fe₃O₄ were suggested as the surface active components on the Fe/Co/Ni (10:30:60)–Al₂O₃ catalyst, while Ni₂O₃ and Co₃O₄ on the Pr/Co/Ni (5:35:60)–Al₂O₃ catalyst.     

Application of supercritical fluid chromatography in the quantitative analysis of minor components (carotenes,vitamin E,sterols, and squalene) from palm oil

The application of supercritical fluid chromatography (SFC) coupled with a UV variable-wavelength detector to isolate the minor components (carotenes, vitamin E, sterols, and squalene) in crude palm oil (CPO) and the residual oil from palm-pressed fiber is reported. SFC is a good technique for the isolation and analysis of these compounds from the sources mentioned. The carotenes, vitamin E, sterols, and squalene were isolated in less than 20 min. The individual vitamin E isomers present in palm oil were also isolated into their respective components, α-tocopherol, α-tocotrienol, γ-tocopherol, γ-tocotrienol, and δ-tocotrienol. Calibration of all the minor components of palm as well as the individual components of palm vitamin E was carried out and was found to be comparable to those analyzed by other established analytical methods.     

On the in‐situ polymerization of cyclic butylene terephthalate oligomers: DSC and rheological studies

The thermal and rheological behaviors of cyclic butylene terephthalate (CBT) were studied with differential scanning calorimetry (DSC) and plate–plate rheometry, respectively. DSC scans were taken at different heating rates. The related first‐heat thermograms indicated crystallization and melting of the resulting poly (butylene terephthalate) (PBT) only at very low heating rate (0.5°C/min). As the crystallization and melting enthalpies were closely matched, one could conclude that the polymerization is essentially athermic. The polymerization was accompanied by a steep increase of the melt viscosity in isothermal rheological tests performed in the temperature range T = 145–210°C. Changes in the viscoelasticity of the polymerizing CBT and crystallizing PBT could be best followed by considering the changes in the phase angle. Viscosity increased with the conversion exponentially in the first approximation. POLYM. ENG. SCI., 46:743–750, 2006. © 2006 Society of Plastics Engineers     

High frequency response to the impedance complex properties of Nb-doped CaCu3Ti4O12 electroceramics

Impedance analyses was performed on undoped and Nb-doped CaCu₃Ti₄O₁₂ (CaCu₃Ti_4−xNb_xO_12+x/2; x = 0, 0.01, 0.03, 0.05, 0.1) to investigate their electrical properties. The pellet samples were prepared using the solid state reaction method. Silver electrode was deposited on both pellets’ surfaces for electrical measurement. The thermally etched samples showed tiny bumped domains within the grains. The existence of both domain and grain boundaries are believed to strongly influence the dielectric constant of CaCu₃Ti₄O₁₂ (CCTO). Undoped CCTO showed two arcs of impedance complex plane while Nb-doped samples have three arcs. Each arc represents the constituent elements of the CCTO. The highest frequency arc is evidence that CCTO consists of conductive domains which measure about 1 Ω and are insulated by two types of barriers, i.e. domain boundary and grain boundary.     

Double hinged articulated tower interaction with wind and waves

Articulated offshore towers are highly flexible against rotation at the hinges and derive their stability by means of inherently large buoyancy forces. The displacement response of such towers is mainly governed by the rigid body mode of vibration which has a very low frequency. Since the fluctuating wind velocity spectrum has high energy content in the low frequency region, therefore, wind induces significant dynamic response of such towers. In this paper, the responses of single and double hinged articulated towers are compared under various ocean environments. A Monte Carlo simulation technique is used to model the random sea environment. The sea state is characterized by Pierson–Moskowitz spectrum while the fluctuating wind has been estimated using Simiu's spectrum for compliant platforms. Iterative time domain solution procedure is adopted to take care of time dependent parameters and nonlinearities. Stochastic response is characterized by statistical quantities and power spectral density functions (PSDF) for various parametric combinations. Studies of wind effects are found to be imperative for double hinged articulated towers to serve and survive in the hostile offshore environment. The response PSDF highlights the wind induced dynamic responses of the towers.