Synthesis and characterization of polyethersulfone membranes

Phase inversion method was used to prepare polyethersulfone (PES) ultrafiltration (UF) membranes. Polyethylene glycol (PEG); N, N-dimethyl formamide (DMF) and water were utilized as pore-forming additive, solvent and non-solvent, respectively. Effects of PES and PEG concentrations in the casting solution, PEG molecular weight (MW) and coagulation bath temperature (CBT) on morphology of the prepared membranes were investigated. Taguchi experimental design was applied to run a minimum number of experiments. 18 membranes were synthesized and their permeation and rejection properties to pure water and human serum albumin (HSA) solution were studied. It was found out that increasing PEG concentration, PEG MW and CBT, accelerates diffusional exchange rate of solvent (DMF) and non-solvent (water) and consequently facilitates formation of macrovoids in the membrane structure. The results showed that, increasing PES concentration, however, slows down the demixing process. This prevents instantaneous growth of nucleuses in the membrane structure. Hence, a large number of small nucleuses are created and distributed throughout the polymer film and denser membranes are synthesized. A trade-off between water permeation and HSA rejection was involved, with membranes having higher water permeation exhibited lower HSA rejection, and vice versa. Hence, optimizing preparation variables to achieve high pure water permeation flux along with reasonable HSA rejection was inevitable. Analysis of variance (ANOVA) showed that all parameters have significant effects on the response (water flux and HSA rejection). However, CBT and PES concentration were more influential factors than PEG concentration and MW on the responses.     

Studies of carbonaceous species in alkali promoted iron catalysts during Fischer–Tropsch synthesis

The effects of La, Mg and Ca promoters on carbonaceous surface and bulk iron carbide species formed in the alkali promoted iron catalysts are studied under realistic Fischer–Tropsch synthesis (FTS) conditions. Compositions of bulk iron phase and phase transformations of carbonaceous species during pretreatment and FTS reaction were characterized using the temperature-programmed surface reaction with hydrogen (TPSR-H₂) and XRD techniques. Many carbonaceous species on surface and bulk were qualitatively and quantitatively identified by combined TPSR-H₂ and XRD spectra of the alkali promoted iron catalyst. These species, sorted by the their reactivity with H₂ from high to low, were recognized as (a) adsorbed, atomic carbon; (b) amorphous, lightly polymerized hydrocarbon or carbon surface species; (c) bulk carbides and (d) disordered and moderately ordered graphitic surface carbons. The results revealed that while the surface basicity of the iron catalyst increased the CO dissociation proceeds faster than carbon hydrogenation. This phenomenon leads to excessive carbon deposition and formation of inactive iron carbide phases and graphitic type carbonaceous surface species, and consequently leads to catalyst deactivation.     

Morphological,mechanical, and rheological studies of PVC/ABS blends in the presence of maleic anhydride

A novel method of enhancing compatibility in PVC/ABS blends is the use of ABS‐grafted‐(maleic anhydride) (ABS‐g‐MAH) as a compatibilizer. In this study, maleic anhydride was grafted onto ABS (initiated by peroxide) in an internal mixer. Grafting degree was determined by a back‐titration method, and certain amounts of the resultant ABS‐g‐MAH were added to PVC/ABS blends during their melt blending in the mixer. The weight ratio of PVC to ABS was kept at 70:30. Evaluation of compatibilization was accomplished via tensile and notched Izod impact tests, scanning electron microscopy (SEM), and rheological studies. According to the SEM micrographs, better dispersion of the rubber phase and its finer size in properly compatibilized blends were indications of better compatibility. Besides, in the presence of a proper amount [5 parts per hundred parts of PVC (php)] of ABS‐g‐MAH, PVC/ABS blends showed significantly higher impact strengths than uncompatibilized blends. This result, in turn, would be an indication of better compatibility. In the presence of 5 php of compatibilizer, the higher complex viscosity and storage modulus, as well as a lower loss modulus and loss factor in the range of frequency studied, indicated stronger interfacial adhesion as a result of interaction between maleic anhydride and the PVC‐SAN matrix. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Comparative study of the effects of chlorinated polyethylene and acrylic impact modifier on the thermal degradation of poly(vinyl chloride) compounds and poly(vinyl chloride)/(oil palm empty fruit bunch) composites

The effects of chlorinated polyethylene (CPE) and acrylic impact modifier (AIM) on the thermal degradation of poly(vinyl chloride) (PVC) compounds and composites were investigated. The amounts of AIM and CPE used were fixed at 9 parts per hundred parts of resin (phr), while oil palm empty fruit bunch (OPEFB) fiber content was increased from 0 to 40 phr. To produce composites, the PVC formulations were dry‐blended by using a laboratory blender before being milled into sheets on a two‐roll mill at 165°C. The milled sheets were then hot‐pressed at 180°C. The thermal degradation of the specimens was evaluated by using thermogravimetry in a nitrogen environment. Thermal stability of the PVC/CPE compounds and PVC/CPE/OPEFB composites was improved by the addition of CPE. The CPE retarded the dehydrochlorination of PVC. However, the stabilization effect was reduced by the incorporation of OPEFB at levels of 30 and 40 phr. The presence of AIM accelerated the dehydrochlorination of PVC/AIM compounds and PVC/AIM/OPEFB composites. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

平面内压力和侧向压力组合作用下预测连续加劲铝板极限强度的经验公式

在对连续加劲铝板屈曲和极限强度的敏感性研究基础之上,对压力作用下的铝板进行了深入研究。开发了一个经验公式,用于预测海洋工程中采用焊接加劲铝板在平面内轴压和各种侧向压力作用下的极限抗压强度。极限抗压强度的计算利用了一些的铝板敏感性分析的相关数据,推导出来的公式中含有两个参数,分别是板长细比和柱(加劲肋)长细比。推导过程中也用到了回归分析。公式考虑了焊接对初始缺陷和热影响区的影响。     

Risk-Based Evaluation for Meeting Future Water Demand of the Brahmaputra Floodplain Within Bangladesh

A risk-based evaluation is performed for meeting future water demands in the Brahmaputra Floodplain Area within Bangladesh (BFA). This evaluation is carried out using three risk-based performance indicators: reliability, resiliency and vulnerability. The vulnerability indicator has been redefined incorporating the aspect of a supply failure. The analysis includes the impacts of climate change on both water demands and resources, and the generation of synthetic flows of the Brahmaputra River using time series models. The simulated values of the indicators reveal that the expected demand of the BFA up to the year 2050 can be supplied with the proposed Brahmaputra Barrage inside Bangladesh under the ‘no change’ in climatic condition, provided that the groundwater remains usable. However, if groundwater becomes unusable due to widespread arsenic contamination and/or a climate change occurs, it would not be possible to meet the future water demand of the region with high reliability, moderate resiliency and low vulnerability.     

Design comparison of experimental storm water detention systems treating concentrated road runoff

The aim was to assess the treatment efficiencies of experimental storm water detention (extended storage) systems based on the Atlantis Water Management Limited detention cells receiving concentrated runoff that has been primarily treated by filtration with different inert aggregates. Randomly collected gully pot liquor was used in stead of road runoff. To test for a 'worst case scenario', the experimental system received higher volumes and pollutant concentrations in comparison to real detention systems under real (frequently longer but diluted) runoff events. Gravel (6 and 20 mm), sand (1.5 mm), Ecosoil (inert 2 mm aggregate provided by Atlantis Water Management Limited), block paving and turf were tested in terms of their influence on the water quality. Concentrations of five-day at 20 degrees C ATU biochemical oxygen demand (BOD) in contrast to suspended solids (SS) were frequently reduced to below international secondary wastewater treatment standards. The denitrification process was not completed. This resulted in higher outflow than inflow nitrate-nitrogen concentrations. An analysis of variance indicated that some systems were similar in terms of most of their treatment performance variables including BOD and SS. It follows that there is no advantage in using additional aggregates with high adsorption capacities in the primary treatment stage.     

Clarifying the effects of comonomer distribution between short and long chains on physical and mechanical properties of ethylenic copolymers

In this paper, two Zigler-Natta catalysts (ZNCs) were used to synthesize a commercially available linear low-density polyethylene (LLDPE), widely used in the packaging industry, on an industrial scale. The catalysts differ only in their ability to distribute comonomers between short and long chains. Both catalysts were fully characterized in the first section, and two similar ethylene/1-butene copolymers were made using them. Afterward, the produced copolymers were fully characterized using different techniques; namely, differential scanning calorimetry (DSC), successive self-nucleation and annealing (SSA), oxygen induction time (OIT), melt flow index (MFI), rheometric mechanical spectroscopy (RMS), and a wide range of mechanical experiments. It was revealed that while the presence of comonomers in short chains can reduce their resistance against oxidation (by more than 30%) and can cause a dramatic change in friction coefficients (by more than 20%), some of the other main mechanical properties of the made copolymers were independent of comonomer distribution between long and short chains. In addition, it was shown that ethylenic copolymers' strain hardening modulus (SHM) takes advantage of the homogenous distribution.     

4D Printing of Polyvinyl Chloride (PVC): A Detailed Analysis of Microstructure,Programming, and Shape Memory Performance

In this research, polyvinyl chloride (PVC) with excellent shape-memory effects is 4D printed via fused deposition modeling (FDM) technology. An experimental procedure for successful 3D printing of lab-made filament from PVC granules is introduced. Macro- and microstructural features of 3D printed PVC are investigated by means of wide-angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), and dynamic mechanical thermal analysis (DMTA) techniques. A promising shape-memory feature of PVC is hypothesized from the presence of small close imperfect thermodynamically stable crystallites as physical crosslinks, which are further reinforced by mesomorphs and possibly molecular entanglement. A detailed analysis of shape fixity and shape recovery performance of 3D printed PVC is carried out considering three programming scenarios of cold (T_g −45 °C), warm (T_g −15 °C), and hot (T_g +15 °C) and two load holding times of 0 s, and 600 s under three-point bending and compression modes. Extensive insightful discussions are presented, and in conclusion, shape-memory effects are promising,ranging from 83.24% to 100%. Due to the absence of similar results in the specialized literature, this paper is likely to fill a gap in the state-of-the-art shape-memory materials library for 4D printing, and provide pertinent results that are instrumental in the 3D printing of shape-memory PVC-based structures.     

Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes: Morphological,Mechanical, and Gas Barrier Properties

Herein, a simple melt-blending method is utilized to disperse of halloysite nanotubes (HNTs) in polystyrene/polyolefin elastomer (PS/POE) blends. Based on morphological studies, the PS/POE/HNT nanocomposite containing up to 3 phr HNTs shows excellent nanofiller dispersion, while those filled with 5 phr HNTs exhibit nanofiller aggregation. To overcome the nanofiller aggregation issue, the polypropylene-grafted-maleic anhydride (PP-g-MA) compatibilizer is added to the PS/POE/HNT nanocomposite, which results in improved mechanical properties for the nanocomposite sheets. Furthermore, the addition of compatibilized HNTs to the PS/POE blends leads to decreased O₂ and N₂ gas permeabilities. Besides, incorporating POE, HNTs, and PP-g-MA leads to a decrease in water vapor transmission of PS. In the end, the experimentally-determined mechanical properties and gas permeabilities of the nanocomposite sheets are compared to those predicted by prevalent theoretical models, revealing a good agreement between the experimental and theoretical results. Molecular-dynamics simulations are also carried out to calculate the gas diffusion coefficients in the different sheets to further support the experimental findings in this study. Overall, the PS/POE/HNT/PP-g-MA nanocomposite sheets fabricated in this work demonstrate excellent mechanical and gas barrier properties; and hence, can be used as candidate packaging materials. However, the strength of the resulting PS/POE blend may be inferior to that of the virgin PS.