Margin of safety for the human back: a probable consensus based on published studies.

Despite numerous efforts to control occurrences of work-related low back pain, it continues to be a significant problem. Since the causation of low back pain is under multifactorial control, it is suggested that the factor most vulnerable at any given time will determine the safety. Epidemiological, biomechanical, physiological, and psychophysical information presented in published literature has been analysed. The data available are related to injuries and the projected margin of safety. This paper therefore, is an integrative, inferential synthesis of the published work to discern the margin of safety. An attempt has been made to conclude, on the basis of objective evidence, an all encompassing criterion to ensure the safety of the back. The psychophysical approach appears to integrate biomechanical and physiological variables on a short term basis in the studies surveyed. However, it remains to be proven that the sensory conditioning due to prolonged and repetitive occupational tasks will remain responsive to cumulative load and fatigue failures.     

LENGTH OF WORK-WEEK IN THE USA IN THE FUTURE

There is a growing concern in die labor sector to reduce stresses in the work place and the associated strains and adverse effects on health which result from newer forms of tasks that workers are increasingly called upon to perform. One approach to reducing stresses is to reduce the work-week (fewer hours per week). Social expectation of longer vacations and leisure time, demographic changes, and changes in the nature of die work and attitudes towards work also support this trend. The objective of this position paper is to consider the implication of such a move and the feasibility of this approach. Specifically, we consider the effects of a shorter work-week on productivity and economy and discuss the various patterns of shorter work-week. Finally, we present our position on die pattern of the shorter work-week in the United States in the future.     

原位形成Al3Ti颗粒对SiCp／2024Al复合材料性能及微观结构的影响

本文采用粉末冶金法制制备了含Ｔｉ的ＳｉＣｐ／２０２４Ａｌ复合材料。研究表明，在复合材料制备工艺条件下，部分Ｔｉ与Ａｌ反应形成了Ａｌ３Ｔｉ，粗大的Ａｌ３Ｔｉ／Ｔｉ复合颗粒的存在降低了复合材料的室温拉伸强度和塑性，但可以提高屈服强度和弹性模量。     

Development of non-linear polynomials in identifying human isometric strength behaviour

Non-linear polynomials for several human isometric strengths have been developed with the help of a modified heuristic technique, Group Method of Data Handling (GMDH). These polynomials use different body size parameters (anthropometric variables) in predicting isometric strengths. The modified GMDH technique was very helpful in identifying strength polynomials even though body size measurements, historically, have been found to be poor predictors of isometric strenghts.     

Evaluation of Thermal Resistance Matrix Method for an Embedded Power Electronic Module

Thermal characterization provides data on the thermal performance of electronic components under given cooling conditions. The most common thermal characterization parameter used to characterize the behavior of electronic components is the thermal resistance. In this work, experiments are conducted to obtain thermal characterization data for different chips in a multichip package. Using this data, it is shown that the assumption of a linear temperature rise with input power is valid within the expected range of operation of the electronic module. Secondly, the applicability of a resistance matrix superposition methodology to the packaging structure of an integrated power electronic module is evaluated. The temperatures and the associated uncertainties involved in using the resistance matrix superposition method are compared to those obtained directly by powering all chips. It is shown that for any arbitrary power losses from the chips, the resistance matrix superposition method can predict the temperatures of a multichip package with reasonable accuracy for temperature rise up to 50degC.     

The Palladium(II) Complex of Aβ4−16 as Suitable Model for Structural Studies of Biorelevant Copper(II) Complexes of N-Truncated Beta-Amyloids

The Aβ4−42 peptide is a major beta-amyloid species in the human brain, forming toxic aggregates related to Alzheimer’s Disease. It also strongly chelates Cu(II) at the N-terminal Phe-Arg-His ATCUN motif, as demonstrated in Aβ4−16 and Aβ4−9 model peptides. The resulting complex resists ROS generation and exchange processes and may help protect synapses from copper-related oxidative damage. Structural characterization of Cu(II)Aβ4−x complexes by NMR would help elucidate their biological function, but is precluded by Cu(II) paramagneticism. Instead we used an isostructural diamagnetic Pd(II)-Aβ4−16 complex as a model. To avoid a kinetic trapping of Pd(II) in an inappropriate transient structure, we designed an appropriate pH-dependent synthetic procedure for ATCUN Pd(II)Aβ4−16, controlled by CD, fluorescence and ESI-MS. Its assignments and structure at pH 6.5 were obtained by TOCSY, NOESY, ROESY, 1H-13C HSQC and 1H-15N HSQC NMR experiments, for natural abundance 13C and 15N isotopes, aided by corresponding experiments for Pd(II)-Phe-Arg-His. The square-planar Pd(II)-ATCUN coordination was confirmed, with the rest of the peptide mostly unstructured. The diffusion rates of Aβ4−16, Pd(II)-Aβ4−16 and their mixture determined using PGSE-NMR experiment suggested that the Pd(II) complex forms a supramolecular assembly with the apopeptide. These results confirm that Pd(II) substitution enables NMR studies of structural aspects of Cu(II)-Aβ complexes.     

Analytical analysis of heat transfer and pumping power of laminar nanofluid developing flow in microchannels

Thermal management issues are limiting barriers to high density electronics packaging and miniaturization. Liquid cooling using micro and mini channels is an attractive alternative to large and bulky aluminum or copper heat sinks. These channels can be integrated directly into a chip or a heat spreader, and cooling can be further enhanced using nanofluids (liquid solutions with dispersed nanometer-sized particles) due to their enhanced heat transfer effects reported in literature. The goals of this study are to evaluate heat transfer improvement of a nanofluid heat sink with developing laminar flow forced convection, taking into account the pumping power penalty. The phrase heat transfer enhancement ratio (HTR) is used to denote the ratio of average heat transfer coefficient of nanofluid to water at the same pumping power. The proposed model uses semi-empirical correlations to calculate nanofluid thermophysical properties. The predictions of the model are found to be in good agreement with experimental studies. The validated model is used to identify important design variables (Reynolds number, volume fraction and particle size) related to thermal and flow characteristics of the microchannel heat sink with nanofluids. Statistical analysis of the model showed that the volume fraction is the most significant factor impacting the HTR, followed by the particle diameter. The impact of the Reynolds number and other interaction terms is relatively weak. The HTR is maximized at smallest possible particle diameter (since smaller particles improve heat transfer but do not impact pumping power). Then, for a given Reynolds number, an optimal value of volume fraction can be obtained to maximize HTR. The overall aim is to present results that would be useful for understanding and optimal design of microchannel heat sinks with nanofluid flow.     

Decentralized suboptimal load-frequency control of a hydro-thermal power system using the state variable model

State space modelling and synthesis of decentralized suboptimal load-frequency control for hydro-thermal power systems are described in this paper. The state space models are derived by the partial fraction technique for reheat steam turbines, hydro turbines and hydro governors having numerator dynamics. Decentralized suboptimal load-frequency controls are synthesized by using the method of minimum error excitation and their performance is analysed as a function of tie-line power level. It is shown that the suboptimal control with feedback of some, but not all, of the remote area state variables is a feasible alternative to the optimal control, whereas local control without feedback of any remote state variable is inadequate for stabilizing the system.     

Kinetic analysis of manual lifting activities: Part II—Biomechanical analysis of task variables

This paper, the second of a series of two papers, presents the results of biomechanical analyses of task variables in manual lifting activities. The three-dimensional dynamic biomechanical model, presented in part I was used to analyze compressive and shear forces generated during symmetrical and asymmetrical lifting, lifting boxes with or without handles, and lifting loads in different size boxes (defined by the box dimension in the sagittal plane). The measured ground reaction forces were also analyzed for the effects of these task variables. The results indicated that even though low-weights are accepted for lifting when lifting loads asymmetrically or in bigger boxes or when handling boxes without handles, the spinal stresses generated are, in general, significantly higher than when lifting loads symmetrically or in compart boxes or when handling boxes with handles. At the maximum acceptable weights of lift, the compressive forces generated were observed to be at least 30% to 50% lower than the compressive failure limit of the spinal structure.     

Numerical simulation of the system “fixture–workpiece” for lever machining

In this article, the new configuration of fixture was proposed for ensuring the sufficient tool accessibility, which allows carrying out multiaxis machining of levers in one setup. The research based on numerical simulation was confirmed that the proposed fixture corresponds to all the accuracy parameters. Workpieces from steel, cast iron and aluminium alloy were investigated within the simulation. The values of displacements and stresses occurring during machining are less for proposed fixture in comparison with the existing fixtures that was confirmed by the deflected mode analysis. The modal analysis proved that the proposed fixture has much higher value of eigenfrequency than the other fixtures. To optimize the machining, the dependences for displacements and stresses on the cutting depth were determined. Oscillations of the system “fixture–workpiece” during machining were investigated for various manufacturing steps of levers machining of the fixtures from different fixture systems. The results of harmonic analysis showed that the dynamic stiffness of the proposed fixture was higher than that for the dedicated and modular fixtures. The oscillation amplitudes in the places of machined surfaces in the proposed fixture do not exceed the tolerance requirements for lever manufacturing.