Effects of Modified Atmosphere Packaging with Various Carbon Dioxide Composition on Biogenic Amines Formation in Indian Mackerel (Rastrelliger kanagurta) stored at 5 ± 1°C

The profile of major biogenic amines was investigated in Indian mackerel packed in modified atmosphere for up to 12 days at 5 ± 1°C. Beheaded and gutted Indian mackerel was packed under different carbon dioxide compositions to study the effects on biogenic amines formation. The treatments were control air (C), vacuum packaging (VP), 30% CO₂/65% N₂/5% O₂ (M30C), 60% CO₂/35% N₂/5% O₂ (M60C), 80% CO₂/15% N₂/5% O₂ (M80C) and 100% CO₂ (M100C). Each amine responded differently to different CO₂ levels. After 12 days of storage, concentrations of histamine were reduced by 6.4%, 8.5%, 70.3%, 78.8% and 90.2% in fish packed under VP, M30C, M60C, M80C and M100C, respectively as compared with control air. Changes in putrescine and cadaverine showed a similar pattern. Gas mix of M30C and VP stimulated the formation of tyramine reaching 203 and 172 ppm, respectively. Higher composition of CO₂ had a significant inhibitory effect on tyramine concentration (p < 0.05). There were parallel increases of putrescine and spermidine in C, VP and M30C. No significant effect of CO₂ was observed on spermine (p > 0.05). After 9 days of storage, more than 300 ppm of histamine was detected in mackerel packed in VP and M30C; therefore, these atmospheres pose a histamine intoxication risk. Copyright © 2013 John Wiley & Sons, Ltd.     

Single-element ultrasound transducer for combined vessel localization and ablation

This report describes a system that utilizes a single high-intensity focused ultrasound (HIFU) transducer for both the localization and ablation of arteries with internal diameters of 0.5 and 1.3 mm. In vitro and in vivo tests were performed to demonstrate both the imaging and ablation functionalities of this system. For imaging mode, pulsed acoustic waves (3 cycles for in vitro and 10 cycles for in vivo tests, 2 MPa peak pressure) were emitted from the 2-MHz HIFU transducer, and the backscattered ultrasonic signal was collected by the same transducer to calculate Doppler shifts in the target region. The maximum signal amplitude of the Doppler shift was used to determine the location of the target vessel. The operation mode was then switched to the therapeutic mode and vessel occlusion was successfully produced by high-intensity continuous HIFU waves (12 MPa) for 60 s. The system was then switched back to imaging mode for residual flow to determine the need for a second ablation treatment. The new system might be used to target and occlude unwanted vessels such as vasculature around tumors, and to help with tumor destruction.     

Design of single peptides for self-assembled conduction channels

Self-assembly of peptides provides the possibility of achieving relatively long range order on surfaces. These ordered peptides can also form channels that can be used as conduction channels. In the past, studies were focused on electron conduction through the secondary structure and amine bond of peptides and these restrict conduction of electrons over a short range (a few nanometers). In this work, we demonstrate the realization of electron conduction over a longer range of a few hundred nanometers via π-π stacking of the phenyl groups in the tyrosine residue of a single peptide. The peptide used in this work was designed with a phenyl ring for π-π stacking at one end and a carboxylic group at the other end for binding to aminopropyltriethoxysilane (APTES) treated silicon wafer. The distance between the peptides is controlled by a disulfide bond formed between neighboring cysteine residue and also by the amine groups of aminopropyltriethoxysilane. We demonstrate that the self-assembled peptide is conducting in the dry state over hundreds of nanometers, realizing the possibility of using peptide as a molecular wire.     

A portable optical sensing system for rapid detection of fluorescence spectra

Development of a prototype of a portable optical sensing system is presented for fast detecting of samples' fluorescence spectra. A compact configuration is achieved by integrating a small spectrometer, a microcontroller, a Universal Serial Bus (USB) Host Shield, a network module, and a web server. The fluorescence spectra of a tested sample can be obtained. Then the test data are sent through network communication to our Cloud Server which can store the data for further analyses. With this configuration, test results can be revealed in a short time and downloaded by users to their laptops, tablets or cellphones anytime and anywhere.     

Highly scalable wavelet-based video codec for very low bit-rateenvironment

We introduce a highly scalable video compression system for very low bit-rate videoconferencing and telephony applications around 10-30 kbits/s. The video codec first performs a motion-compensated three-dimensional (3-D) wavelet (packet) decomposition of a group of video frames, and then encodes the important wavelet coefficients using a new data structure called tri-zerotrees (TRI-ZTR). Together, the proposed video coding framework forms an extension of the original zero tree idea of Shapiro (1992) for still image compression. In addition, we also incorporate a high degree of video scalability into the codec by combining the layered/progressive coding strategy with the concept of embedded resolution block coding. With scalable algorithms, only one original compressed video bit stream is generated. Different subsets of the bit stream can then be selected at the decoder to support a multitude of display specifications such as bit rate, quality level, spatial resolution, frame rate, decoding hardware complexity, and end-to-end coding delay. The proposed video codec also allows precise bit rate control at both the encoder and decoder, and this can be achieved independently of the other video scaling parameters. Such a scheme is very useful for both constant and variable bit rate transmission over mobile communication channels, as well as video distribution over heterogeneous multicast networks. Finally, our simulations demonstrated comparable objective and subjective performance when compared to the ITU-T H.263 video coding standard, while providing both multirate and multiresolution video scalability     

Film insert molding as a novel weld‐line inhibition and strengthening technique

Specimens with weld lines were produced via conventional and film insert molding techniques using two types of materials as the substrate resin, i.e. a polycarbonate/acrylonitrile‐butadiene‐styrene (PC/ABS) blend and glass fiber‐filled polycarbonate (PC‐gf). The formation and morphology of the weld line region was assessed with and without the presence of 0.5‐mm‐thick PC film inserts. The weld line formation and characteristics were found to be dependent on the extent of interaction between the injected resin and the mold surface or the film insert. Better interfacial interaction between the substrate and film led to the distortion of the weld line orientation, which significantly enhanced the mechanical properties of the weld line. The incorporation of glass fibers into the substrate resin would usually reduce the resistance of the weld line towards tensile, flexural and impact loadings. However, with the attachment of film inserts, the mechanical properties of the weld line region have significantly improved, even with the presence of rigid fibers. Upon examination of tensile and impact fracture surfaces of film insert specimens, a unique orientation of fibers across the weld line (parallel to the flow direction and perpendicular to the weld line) could be observed at regions directly under the film. The combination of favorable properties from the unique fiber orientation and distortion of the weld line, as well as the ability of the film to effectively dissipate forces towards a larger area, have synergistically contributed towards the mechanical property enhancement of the weld line region in film insert moldings. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Tunable erbium-doped fiber laser with a reflection Mach-Zehnderinterferometer

The concept of a tunable erbium-doped fiber ring laser based on a reflection Mach-Zehnder interferometer is presented. The principle of operation is demonstrated with a fiber version of the interferometer which gave a tuning range of 39 nm. With current electro-optic devices, high speed tuning should be possible     

Kinetics of aspartame precursor synthesis catalysed by Pseudomonas aeruginosa elastase

Elastase isolated from Pseudomonas aeruginosa IFO 3455 was found to be an efficient protease to catalyse the synthesis of N-benzyloxycarbonyl-aspartyl-phenylalanine methyl ester, the precursor of the dipeptide sweetener, aspartame. The influence of methanol as a cosolvent in this synthetic reaction was investigated. It was found that the synthesis of the dipeptide precursor was most efficient in 25% (v/v) methanol, pH 7·0 at about 25°C for a reaction time of about 3 h. However, the activity of the enzyme was greatly reduced in 90% methanol. The values of K and k₂ for N-benzyloxycarbonyl-aspartic acid were 0·17 mol dm^?3 and 11·9 mol dm^?3 s^?1 respectively.     

Extract of white button mushroom affects skin healing and angiogenesis

White button mushroom extract was examined in this study on (1) its potential effect on angiogenesis in chorioallantoic culture and (2) its recovering effect on the skin after injury in the ICR mice. Methods used included TUNEL assay on apoptosis, immunohistochemistry for vascular endothelial growth factor (VEGF), proliferative cell nuclear antigen (PCNA), epidermal growth factor (EGF), transforming growth factor β (TGF‐β), and immune factor CD4 and western blotting. The results of chorioallantoic culture showed that the mushroom treatment led to significant increase in densities of VEGF sites. In the skin injury, ICR mice model increased EGF, PCNA, and collagen fibers, along with decrease of TUNEL positive apoptotic cells and limited reaction of TGF‐β and CD4 indicated that white button mushroom extract appeared to have beneficial effects on skin in regeneration and after injury. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.